Dacor 48 Discovery Rangetop
Description
The Dacor DYRTP486S Discovery rangetop represents professional-grade cooking performance engineered for the most demanding residential kitchens. This expansive 48-inch gas rangetop features six powerful sealed burners with SimmerSear technology delivering 800 to 18,000 BTUs, Perma-Flame ignition, and continuous platform grates that accommodate the largest cookware. For countertop fabricators specializing in luxury installations, the DYRTP486S requires precise cutout execution and substantial structural support. Our professionally verified DXF template provides exact specifications for the Dacor DYRTP486S, ensuring flawless fitment in high-end stone installations. With cutout dimensions of 47 inches wide by 24 inches deep, this rangetop demands careful planning for countertop depth, edge clearances, and support reinforcement. Whether fabricating granite, quartz, or exotic natural stone surfaces, this template delivers the precision essential for professional results in luxury kitchen projects where perfection is non-negotiable.
Dimensions
- Overall Width
- 47.875"
- Overall Depth
- 25.8125"
- Corner Radius
- 0.5"
Specifications
- Manufacturer
- Dacor
- Model Number
- DYRTP486S
- Downloads
- 0
Related Templates
The Dacor DYRTP486S Discovery rangetop represents professional-grade cooking performance engineered for the most demanding residential kitchens. This expansive 48-inch gas rangetop features six powerful sealed burners with SimmerSear technology delivering 800 to 18,000 BTUs, Perma-Flame ignition, and continuous platform grates that accommodate the largest cookware. For countertop fabricators specializing in luxury installations, the DYRTP486S requires precise cutout execution and substantial structural support. Our professionally verified DXF template provides exact specifications for the Dacor DYRTP486S, ensuring flawless fitment in high-end stone installations. With cutout dimensions of 47 inches wide by 24 inches deep, this rangetop demands careful planning for countertop depth, edge clearances, and support reinforcement. Whether fabricating granite, quartz, or exotic natural stone surfaces, this template delivers the precision essential for professional results in luxury kitchen projects where perfection is non-negotiable.
Installation Overview
Installing the Dacor DYRTP486S Discovery rangetop requires meticulous planning for the substantial cutout dimensions, professional gas supply infrastructure, and high-capacity ventilation. The 6-burner configuration with 96,000 total BTUs demands robust installation specifications. **Critical Installation Specifications:** - Exact cutout dimensions: 47" W × 24" D - Overall unit dimensions: 47 7/8" W × 25 13/16" D × 9" H - Minimum countertop depth: 28 inches from front edge (30 inches strongly recommended) - Corner radius: 1/2 inch for stress distribution and proper seating - Edge clearance: Minimum 3 inches from countertop edges for combustible surfaces - Support requirements: Reinforced substrate with support brackets at 12-inch intervals - Gas supply: 3/4" supply line with certified shut-off valve - Ventilation: Commercial-grade hood rated minimum 900 CFM (1200 CFM recommended) - Weight: Approximately 200 pounds installed - Electrical: 120V outlet required for electronic ignition and controls The DYRTP486S features extra-wide continuous platform grates designed for professional cooking techniques. Installation includes adjustable leveling supports and mounting clips securing to countertop underside. Professional gas fitting by licensed technician is mandatory. Verify all local building codes for clearances from combustible materials and ventilation requirements. The 24-inch depth requires careful coordination with backsplash positioning and rear-mounted outlets or switches.
CNC Cutting Notes
CNC fabricators programming the Dacor DYRTP486S cutout must account for the exceptional 47-inch width and 24-inch depth, creating a substantial material removal area requiring strategic support planning and precise execution. The large opening demands careful toolpath optimization. **CNC Programming Recommendations:** - Primary tool: 1/2" diameter solid carbide upcut spiral bit for structural cutting - Finish tool: 3/8" diameter for final pass and precision corner execution - Finish allowance: 0.025" - 0.035" for superior edge quality - Feed rate: 70-100 IPM for granite, 90-120 IPM for quartz - Plunge rate: 12-20 IPM with helical ramping for large cutout entry - Corner radius: 1/2" executed via G02/G03 arc interpolation - Depth passes: Multiple passes mandatory for 3cm materials - Support strategy: Position support brackets before cutting begins - Material stability: Enhanced clamping or vacuum required for large cutout - Edge distance verification: Ensure adequate rear edge clearance on standard depth tops For 3cm granite or quartz fabrication, the 47" × 24" opening removes substantial material weight. Calculate center of gravity shifts and adjust support accordingly. Use progressive diamond polishing from 50 grit through 3000 grit for natural stone edges. Quartz requires matching polish to countertop finish. The large perimeter demands consistent edge quality - maintain steady feed rates and avoid dwell marks at corners. Always perform dry-fit verification with the physical appliance when possible before final installation.
Material Compatibility
The Dacor DYRTP486S Discovery rangetop requires heat-resistant countertop materials with proven performance in professional-grade cooking environments. The 96,000 total BTU output and 18,000 BTU maximum burner rating demand materials engineered for sustained high-temperature exposure. **Recommended Materials:** - **Granite (3cm):** Premier choice for professional rangetops. Exceptional heat resistance, structural integrity across the 47-inch span, and proven durability. Natural stone thermal properties ideal for high-BTU cooking. - **Soapstone (3cm):** Traditional professional kitchen material with superior heat resistance. Natural thermal mass provides stability near high-heat sources. Requires periodic mineral oil maintenance. - **Quartz - Heat-Resistant Formulations (3cm only):** Suitable only with premium heat-resistant quartz specifically rated for professional cooking applications. Brands: Caesarstone Concetto, Silestone Eternal series, Cambria high-heat formulations. Standard quartz is NOT recommended. - **Porcelain Slabs (12mm-20mm):** Modern option with excellent heat resistance and dimensional stability. Large-format slabs minimize seaming. Engineered for high-temperature applications. - **Concrete (Reinforced):** Suitable for industrial or contemporary designs. Excellent heat resistance and structural support. Must be properly sealed with high-temperature sealants. Requires steel reinforcement for span. - **Exotic Granite:** Premium natural stones like Fusion, Black Galaxy, or quartzite varieties offer exceptional performance and aesthetic appeal for luxury installations. **Materials NOT Recommended:** - Standard quartz formulations (insufficient heat resistance) - Marble (heat discoloration risk near professional-grade burners) - Solid surface materials (inadequate heat resistance) - 2cm materials without extensive engineering reinforcement - Laminate (unsuitable for professional cooking appliances) **Structural Considerations:** 3cm thickness is strongly recommended for the 47-inch cutout span. 2cm installations require structural engineering analysis and substantial steel reinforcement framework. Consult material manufacturer guidelines for large cutout support requirements.
Where to Buy
The Dacor DYRTP486S Discovery rangetop is available exclusively through authorized Dacor dealers and luxury appliance showrooms. Retail pricing typically ranges from $6,200 to $8,500 depending on fuel type (natural gas vs. liquid propane), regional availability, and dealer. This professional-grade appliance represents a significant investment in kitchen performance. **Authorized Retailers:** - **Designer Appliances:** Extensive Dacor inventory with expert product consultation - **AJ Madison:** Competitive pricing with white-glove delivery and installation coordination - **Abt Electronics:** Comprehensive support with professional installation services - **Ferguson Showrooms:** Trade professional pricing programs for contractors and fabricators - **Appliances Connection:** Online retailer with nationwide shipping - **Local Luxury Kitchen Dealers:** Personalized consultation with showroom displays **Professional Fabricator Coordination:** Establish direct communication between fabricator, homeowner, and appliance dealer to coordinate delivery timing and specifications verification. Dacor DYRTP486S models typically have 6-10 week lead times depending on fuel type and finish selection. Request the installation manual for the specific configuration (natural gas vs. liquid propane) being installed. **Important Considerations:** - Verify fuel type compatibility (natural gas vs. liquid propane) before ordering - Confirm countertop depth adequacy (minimum 28", recommend 30") - Coordinate ventilation hood selection (minimum 900 CFM rating required) - Verify gas supply infrastructure meets 3/4" line requirement - Schedule professional gas fitting and electrical connections Dacor provides comprehensive warranty coverage including parts and labor. Extended warranty and professional service plans available through authorized dealers. Many dealers offer trade professional accommodation pricing and package deals when purchased with other Dacor appliances for complete kitchen installations.