Dacor 30 Discovery Rangetop
Dacor 30 Discovery Rangetop
Description
IMPORTANT NOTICE: This template references the Dacor model DYRTP306S, which does not appear in current Dacor product catalogs or historical documentation. The Dacor Discovery DYRTP rangetop series includes 36-inch (DYRTP366) and 48-inch (DYRTP486) models, but no 30-inch variant has been identified. If you are working with a Dacor 30-inch rangetop, please verify the exact model number with the homeowner or appliance dealer before proceeding with fabrication. Dacor does manufacture 30-inch cooktops in other product lines, but the DYRTP306S designation does not match any known Dacor product. Using incorrect cutout dimensions can result in costly errors and project delays.
Dimensions
- Overall Width
- 30"
- Overall Depth
- 24"
- Corner Radius
- 0.5"
Specifications
- Manufacturer
- Dacor
- Model Number
- DYRTP306S
- Downloads
- 0
Related Templates
Dacor 36 Discovery Rangetop
Dacor
Dacor 48 Discovery Rangetop
Dacor
Dacor 30 Modernist Gas Cooktop
Dacor
Dacor 36 Modernist Gas Cooktop
Dacor
Answer summary
What is the Dacor 30 Discovery Rangetop DXF template for?
Dacor 30 Discovery Rangetop is a cooktop & range cutouts DXF template for countertop fabrication. Use it only after matching the manufacturer, model, dimensions, variant, and shop workflow to the actual job.
Risk check: Similar-looking products can use different cutout geometry. Confirm the official spec, shop tolerance, material behavior, and CNC output before production.
Next step: Run a DXF check, compare related templates, and keep the current manufacturer spec with the job packet.
Template decision guide
Should you use the Dacor 30 Discovery Rangetop DXF template?
Use the template page to shortlist a production file, then verify the exact model, variant, and machine workflow before cutting.
Best fit
Dacor 30 Discovery Rangetop is most useful when the product, manufacturer, model, install type, and variant match the job you are fabricating.
What to compare
Compare model number, dimensions, reveal or overhang, bowl or appliance geometry, material thickness, and CNC output requirements.
Risk check
Do not use a similar-looking template as a final production file. Small changes in flange, radius, trim, or reveal can cause a failed cutout.
Evidence to verify
Check the current manufacturer spec, field measurement, template preview, DXF layers, and a shop-approved tolerance before production.
Page-specific notes
Page-specific notes for Dacor 30 Discovery Rangetop
These notes are assembled from this exact template record, its category, available variants, and nearby template comparisons. They are meant to make the page more useful than a generic download page.
Exact record SlabWise is using
Dacor DYRTP306S is filed under Cooktop & Range Cutouts. The normalized record lists width 30", depth 24", corner radius 0.5", so the safest use is as a production starting point that still gets checked against the current job packet.
Variant choice
This record is shown as a single template variant. Treat that as a reason to verify reveal, overhang, and cutout assumptions before the file reaches production.
Category-specific production check
Cooktop & Range Cutouts files should be checked for fit against material thickness, edge treatment, sink or appliance clearance, CNC layer expectations, and the shop's preferred tolerance before cutting customer material.
Closest comparisons
Before choosing this file, compare it with Dacor 36 Discovery Rangetop, Dacor 48 Discovery Rangetop, Dacor 30 Modernist Gas Cooktop to catch small model, radius, flange, or layout differences that can change the final cut.
Evidence already attached
This page has extra enrichment for installation overview, CNC cutting notes, material compatibility, buying context. Use those notes as decision support, then keep the official product spec with the job.
IMPORTANT NOTICE: This template references the Dacor model DYRTP306S, which does not appear in current Dacor product catalogs or historical documentation. The Dacor Discovery DYRTP rangetop series includes 36-inch (DYRTP366) and 48-inch (DYRTP486) models, but no 30-inch variant has been identified. If you are working with a Dacor 30-inch rangetop, please verify the exact model number with the homeowner or appliance dealer before proceeding with fabrication. Dacor does manufacture 30-inch cooktops in other product lines, but the DYRTP306S designation does not match any known Dacor product. Using incorrect cutout dimensions can result in costly errors and project delays.
Installation Overview
FABRICATION WARNING: Do not proceed with cutting based on this template without first verifying the actual model number and obtaining manufacturer installation specifications. **Verification Steps Required:** 1. Confirm actual model number from appliance nameplate or purchase documentation 2. Obtain manufacturer installation manual for the specific model 3. Verify cutout dimensions against official specifications 4. Cross-reference all measurements before cutting If working with a legitimate Dacor 30-inch rangetop from a different product series, contact Dacor directly at (800) 793-0093 or visit www.dacor.com to obtain accurate installation specifications. Never rely on approximated or unverified dimensions for high-end appliance installations.
CNC Cutting Notes
CNC PROGRAMMING ALERT: This template contains unverified dimensions for a model that may not exist. Do not generate toolpaths or begin fabrication until the following steps are completed: **Mandatory Pre-Fabrication Checklist:** - [ ] Verify actual appliance model number from physical unit or documentation - [ ] Obtain official manufacturer installation manual - [ ] Confirm cutout dimensions match manufacturer specifications exactly - [ ] Verify corner radius requirements from installation manual - [ ] Check for any model-specific requirements or notes - [ ] Obtain written approval from customer on dimensions before cutting Premature fabrication based on unverified specifications can result in unusable countertops, project delays, and financial losses. Professional fabricators should always verify dimensions against manufacturer documentation and, when possible, the physical appliance before committing to cutting expensive stone materials.
Material Compatibility
Material selection guidance cannot be provided for an unverified appliance model. Different Dacor product lines have varying heat output, ventilation requirements, and structural specifications that influence appropriate countertop material choices. Once you have verified the correct model number and obtained manufacturer specifications, material recommendations can be developed based on: - Appliance heat output (BTU rating for gas models) - Required clearances from combustible materials - Weight and structural support requirements - Ventilation and airflow specifications Consult manufacturer guidelines for material compatibility and installation requirements specific to your actual appliance model.
Where to Buy
Since the model DYRTP306S cannot be verified as a legitimate Dacor product, purchase guidance is not available. If you are seeking a Dacor 30-inch cooking appliance, consider these alternatives: **Verified Dacor 30-inch Options:** - Dacor Contemporary or Transitional 30-inch cooktops (various models available) - Consult authorized Dacor dealers for current 30-inch product offerings - Review Dacor website product catalog for available configurations **Finding the Right Product:** Contact Dacor customer service at (800) 793-0093 to identify the appropriate 30-inch cooking appliance for your project. Authorized dealers can also assist in determining the correct model and specifications. Do not proceed with appliance purchase or countertop fabrication until model verification is complete.