Dacor 36 Discovery Rangetop
Dacor 36 Discovery Rangetop
Description
The Dacor DYRTP366S Discovery rangetop epitomizes the convergence of professional performance and sophisticated design. This 36-inch gas rangetop features six sealed burners delivering up to 18,000 BTUs, SmartFlame technology, and Illumina burner controls that bring restaurant-quality cooking to residential kitchens. For countertop fabricators, the DYRTP366S presents straightforward installation requirements with precise cutout specifications. Our professionally verified DXF template provides exact dimensions for the Dacor DYRTP366S, ensuring proper fitment and optimal performance. With a cutout measuring 35 inches wide by 24 inches deep, this template accommodates the rangetop substantial depth while maintaining structural integrity of the surrounding countertop. Whether fabricating granite, quartz, or soapstone surfaces, this template delivers the precision required for luxury appliance installations in high-end residential projects.
Dimensions
- Overall Width
- 35.875"
- Overall Depth
- 25.8125"
- Corner Radius
- 0.5"
Specifications
- Manufacturer
- Dacor
- Model Number
- DYRTP366S
- Downloads
- 0
Related Templates
Answer summary
What is the Dacor 36 Discovery Rangetop DXF template for?
Dacor 36 Discovery Rangetop is a cooktop & range cutouts DXF template for countertop fabrication. Use it only after matching the manufacturer, model, dimensions, variant, and shop workflow to the actual job.
Risk check: Similar-looking products can use different cutout geometry. Confirm the official spec, shop tolerance, material behavior, and CNC output before production.
Next step: Run a DXF check, compare related templates, and keep the current manufacturer spec with the job packet.
Template decision guide
Should you use the Dacor 36 Discovery Rangetop DXF template?
Use the template page to shortlist a production file, then verify the exact model, variant, and machine workflow before cutting.
Best fit
Dacor 36 Discovery Rangetop is most useful when the product, manufacturer, model, install type, and variant match the job you are fabricating.
What to compare
Compare model number, dimensions, reveal or overhang, bowl or appliance geometry, material thickness, and CNC output requirements.
Risk check
Do not use a similar-looking template as a final production file. Small changes in flange, radius, trim, or reveal can cause a failed cutout.
Evidence to verify
Check the current manufacturer spec, field measurement, template preview, DXF layers, and a shop-approved tolerance before production.
Page-specific notes
Page-specific notes for Dacor 36 Discovery Rangetop
These notes are assembled from this exact template record, its category, available variants, and nearby template comparisons. They are meant to make the page more useful than a generic download page.
Exact record SlabWise is using
Dacor DYRTP366S is filed under Cooktop & Range Cutouts. The normalized record lists width 35.875", depth 25.8125", corner radius 0.5", so the safest use is as a production starting point that still gets checked against the current job packet.
Variant choice
This record is shown as a single template variant. Treat that as a reason to verify reveal, overhang, and cutout assumptions before the file reaches production.
Category-specific production check
Cooktop & Range Cutouts files should be checked for fit against material thickness, edge treatment, sink or appliance clearance, CNC layer expectations, and the shop's preferred tolerance before cutting customer material.
Closest comparisons
Before choosing this file, compare it with Dacor 30 Discovery Rangetop, Dacor 48 Discovery Rangetop, Dacor 30 Modernist Gas Cooktop to catch small model, radius, flange, or layout differences that can change the final cut.
Evidence already attached
This page has extra enrichment for installation overview, CNC cutting notes, material compatibility, buying context. Use those notes as decision support, then keep the official product spec with the job.
The Dacor DYRTP366S Discovery rangetop epitomizes the convergence of professional performance and sophisticated design. This 36-inch gas rangetop features six sealed burners delivering up to 18,000 BTUs, SmartFlame technology, and Illumina burner controls that bring restaurant-quality cooking to residential kitchens. For countertop fabricators, the DYRTP366S presents straightforward installation requirements with precise cutout specifications. Our professionally verified DXF template provides exact dimensions for the Dacor DYRTP366S, ensuring proper fitment and optimal performance. With a cutout measuring 35 inches wide by 24 inches deep, this template accommodates the rangetop substantial depth while maintaining structural integrity of the surrounding countertop. Whether fabricating granite, quartz, or soapstone surfaces, this template delivers the precision required for luxury appliance installations in high-end residential projects.
Installation Overview
Installing the Dacor DYRTP366S Discovery rangetop demands attention to cutout precision, gas supply specifications, and adequate ventilation for the high-BTU burner configuration. The 6-burner layout with 18,000 BTU maximum output requires robust ventilation and proper clearances. **Critical Installation Specifications:** - Exact cutout dimensions: 35" W × 24" D - Overall unit dimensions: 35 7/8" W × 25 13/16" D × 9" H - Minimum countertop depth: 27 inches from front edge - Corner radius: 1/2 inch recommended for stress distribution - Edge clearance: Minimum 2.5 inches from countertop edges - Support requirements: Solid substrate within 2 inches of cutout perimeter - Gas supply: 1/2" supply line with approved shut-off valve - Ventilation: Range hood rated minimum 600 CFM (900 CFM recommended) - Weight: Approximately 180 pounds installed The DYRTP366S features continuous platform grates that allow cookware to slide smoothly across burners. The unit includes mounting clips and adjustable supports that secure to the countertop underside. Professional gas line installation by licensed technician is required. Verify local building codes for specific clearance requirements from combustible materials.
CNC Cutting Notes
CNC fabricators should program the Dacor DYRTP366S cutout with attention to the relatively deep 24-inch dimension, which approaches the practical limits of standard 27-30 inch deep countertops. Precision execution ensures adequate edge distance while accommodating the rangetop depth. **CNC Programming Recommendations:** - Primary tool: 1/2" diameter solid carbide upcut spiral bit - Finish pass: 0.025" - 0.030" allowance for superior edge quality - Feed rate: 75-110 IPM for granite, 95-125 IPM for quartz - Plunge rate: 15-22 IPM with ramping or helical entry - Corner radius: 1/2" executed via G02/G03 arc commands - Depth passes: Multiple passes for 3cm materials, staged cutting for 2cm - Support consideration: Large cutout area requires strategic support placement - Edge clearance verification: Ensure minimum 2.5" rear edge distance on standard depth tops For natural stone fabrication, the 24-inch depth requires careful planning on countertops with undermount sinks or other rear-positioned features. Consider the cumulative material removal when multiple cutouts are present. Polish edges to match countertop finish - use diamond polishing progression through 3000 grit for natural stone. Quartz edges should receive matching polish treatment. Dry-fit verification before installation is critical for large cutouts.
Material Compatibility
The Dacor DYRTP366S Discovery rangetop is compatible with heat-resistant countertop materials capable of handling professional-grade gas cooking temperatures. The 18,000 BTU maximum burner output requires materials with proven thermal resistance. **Recommended Materials:** - **Granite:** Excellent choice for gas rangetops. Superior heat resistance, structural integrity, and traditional aesthetic. 3cm thickness recommended for the 35" span. - **Quartz (Engineered Stone):** Suitable with heat-resistant formulations. Select premium brands with enhanced thermal properties - Caesarstone, Silestone, or Cambria professional-grade series. 3cm thickness required. - **Soapstone:** Traditional professional kitchen material with natural heat resistance. Requires periodic mineral oil maintenance but offers exceptional durability near high-heat sources. - **Marble:** Acceptable with caution. While heat-tolerant, marble can discolor from heat exposure over time. Best reserved for decorative applications away from primary cooking zones. - **Porcelain Slabs:** Modern option with excellent heat resistance and dimensional stability. Large-format slabs minimize seaming requirements. - **Concrete:** Suitable for industrial or contemporary installations. Provides excellent heat resistance and structural support. Requires proper sealing. **Materials to Avoid:** - Solid surface materials (insufficient heat resistance for gas cooking) - Laminate (not suitable for high-heat appliance installations) **Edge Treatment:** Polish cutout edges to match countertop finish. Apply high-temperature penetrating sealer to natural stone edges before appliance installation. Use heat-resistant silicone sealant per manufacturer specifications.
Where to Buy
The Dacor DYRTP366S Discovery rangetop is available through authorized Dacor dealers and premium appliance showrooms. Retail pricing typically ranges from $4,500 to $6,200 depending on fuel type (natural gas vs. liquid propane) and regional availability. Dacor offers both natural gas and liquid propane configurations. **Authorized Retailers:** - **Designer Appliances:** Competitive pricing with expert Dacor product knowledge - **AJ Madison:** Extensive Dacor inventory with nationwide shipping coordination - **Abt Electronics:** Professional installation services and appliance package deals - **Ferguson Showrooms:** Trade professional pricing for contractors and fabricators - **Local Luxury Appliance Dealers:** Personalized consultation and showroom displays **Fabricator Coordination:** Professional fabricators should coordinate directly with homeowners and appliance dealers on delivery timing. Dacor products may have lead times of 4-8 weeks depending on configuration and regional inventory. Request the installation manual for the specific model (natural gas vs. liquid propane) to verify cutout dimensions and clearance requirements. Dacor provides comprehensive warranty coverage including parts and labor. Extended warranty and service plans are available through authorized dealers. Many dealers maintain professional trade programs offering accommodation pricing for contractors and fabricators working on custom kitchen projects.