Native Trails CPS292 Farmhouse Duet 33 Copper Double 33" Double Equal Bowl Farmhouse Sink Cutout
Description
The Native Trails CPS292 Farmhouse Duet 33 Copper Double 33" Double Equal Bowl Farmhouse Sink Cutout is a production-ready DXF template engineered for sinks fabrication projects. At standard dimensions, this template addresses the specific requirements of professional stone fabrication with accurate CNC-ready geometry. Fabricators benefit from standardized dimensions that reduce setup time and improve consistency. This template represents proven configurations used daily in professional fabrication shops.
Dimensions
- Overall Width
- 33"
- Overall Depth
- 22"
- Bowl Width
- 30"
- Bowl Depth
- 18"
- Corner Radius
- 0.5"
Specifications
- Manufacturer
- Native Trails
- Model Number
- CPS292
- Installation Type
- Farmhouse
- Bowl Configuration
- Single
- Material
- Copper
- Min. Cabinet Width
- 36"
- Downloads
- 0
Related Templates
Native Trails CPS212 Cocina 24 Copper 24" Single Bowl Undermount Sink Cutout
Native Trails
Native Trails CPS213 Cocina 30 Copper 30" Single Bowl Undermount Sink Cutout
Native Trails
Native Trails CPS215 Cocina 21 Copper 21" Single Bowl Undermount Sink Cutout
Native Trails
Native Trails CPS232 Farmhouse 30 Copper 30" Single Bowl Farmhouse Sink Cutout
Native Trails
The Native Trails CPS292 Farmhouse Duet 33 Copper Double 33" Double Equal Bowl Farmhouse Sink Cutout is a production-ready DXF template engineered for sinks fabrication projects. At standard dimensions, this template addresses the specific requirements of professional stone fabrication with accurate CNC-ready geometry. Fabricators benefit from standardized dimensions that reduce setup time and improve consistency. This template represents proven configurations used daily in professional fabrication shops.
Installation Overview
Installing the Native Trails CPS292 Farmhouse Duet 33 Copper Double 33" Double Equal Bowl Farmhouse Sink Cutout template requires standard stone fabrication procedures adapted for the sinks category. Begin with accurate field measurements to verify the template dimensions match the installation site. Import the DXF file into CNC programming software and create an optimized cutting plan that minimizes material waste. For the cutting phase, select appropriate diamond tooling based on the stone type being fabricated. Maintain consistent coolant flow during all CNC operations to prevent thermal damage. After cutting, perform edge finishing according to the template specifications. Dry-fit all pieces at the installation site before applying adhesive. Use construction-grade silicone or epoxy appropriate for stone installations. Ensure proper support for all sections, adding brackets where overhangs exceed manufacturer recommendations. Apply a penetrating sealer after installation to protect the finished surface. Final inspection should verify all dimensions match the template within acceptable tolerances.
CNC Cutting Notes
Optimal CNC settings for the Native Trails CPS292 Farmhouse Duet 33 Copper Double 33" Double Equal Bowl Farmhouse Sink Cutout template depend on the substrate material. For natural granite, use 4000-5500 RPM with 30-50 IPM feed. For quartz composites, increase to 5500-7000 RPM at 45-65 IPM. The native profile requires careful attention to entry and exit points on the toolpath to prevent edge chipping. Program multiple depth passes rather than a single full-depth cut. Coolant temperature should remain below 70°F for optimal diamond tool performance. Dress profiling wheels after every 20-30 linear feet of cutting to maintain profile accuracy.
Material Compatibility
The Native Trails CPS292 Farmhouse Duet 33 Copper Double 33" Double Equal Bowl Farmhouse Sink Cutout template works exceptionally well with natural granite, providing clean edges that polish to a high gloss. Marble is also compatible, though the softer stone requires reduced feed rates during CNC operations to prevent micro-chipping. Quartzite offers excellent results with this profile, as the hard mineral structure holds fine details well. Engineered quartz composites are ideal substrates, offering consistent material properties that produce predictable results. Soapstone and slate can be profiled using this template with appropriate tooling adjustments. For limestone, use conservative CNC parameters due to the stone's tendency to chip on detailed profiles. Porcelain sintered stone panels require specialized diamond tooling but produce excellent results with the native geometry.
Where to Buy
Professional fabricators can source dolomite slabs from local stone distributors and wholesale suppliers. Visit SlabWise for template downloads and fabrication resources.