Native Trails CPS215 Cocina 21 Copper 21" Single Bowl Undermount Sink Cutout
Description
Professional fabricators turn to the Native Trails CPS215 Cocina 21 Copper 21" Single Bowl Undermount Sink Cutout template for accurate sinks production work. The standard dimensions specifications provide the exact geometry needed for CNC-based fabrication workflows. This DXF template eliminates manual layout work while ensuring every piece meets the tight tolerances required for quality installations. The design works well across multiple stone types and installation scenarios.
Dimensions
- Overall Width
- 21"
- Overall Depth
- 15"
- Bowl Width
- 19"
- Bowl Depth
- 13"
- Corner Radius
- 0.5"
Specifications
- Manufacturer
- Native Trails
- Model Number
- CPS215
- Installation Type
- Undermount
- Bowl Configuration
- Single
- Material
- Copper
- Min. Cabinet Width
- 24"
- Downloads
- 0
Related Templates
Native Trails CPS212 Cocina 24 Copper 24" Single Bowl Undermount Sink Cutout
Native Trails
Native Trails CPS213 Cocina 30 Copper 30" Single Bowl Undermount Sink Cutout
Native Trails
Native Trails CPS232 Farmhouse 30 Copper 30" Single Bowl Farmhouse Sink Cutout
Native Trails
Native Trails CPS234 Farmhouse 33 Copper 33" Single Bowl Farmhouse Sink Cutout
Native Trails
Professional fabricators turn to the Native Trails CPS215 Cocina 21 Copper 21" Single Bowl Undermount Sink Cutout template for accurate sinks production work. The standard dimensions specifications provide the exact geometry needed for CNC-based fabrication workflows. This DXF template eliminates manual layout work while ensuring every piece meets the tight tolerances required for quality installations. The design works well across multiple stone types and installation scenarios.
Installation Overview
The fabrication process for the Native Trails CPS215 Cocina 21 Copper 21" Single Bowl Undermount Sink Cutout begins with DXF template verification and material selection. Import the template geometry into your CAM software, setting appropriate tool paths for the sinks specifications. Select diamond tooling rated for the specific stone material being processed. CNC cutting should proceed in stages: roughing passes followed by finishing passes at full depth. Maintain proper coolant flow throughout all machining operations. After all pieces are cut, perform any required edge finishing or polishing operations. Transport pieces to the installation site using appropriate lifting equipment and A-frame racks. On-site, verify cabinet or substrate preparation meets installation requirements. Apply adhesive in the recommended pattern and set pieces beginning with the largest section. Complete all joints with color-matched epoxy. Allow full cure time before loading the installation with fixtures or appliances. Seal all exposed surfaces with an appropriate stone sealer.
CNC Cutting Notes
Optimal CNC settings for the Native Trails CPS215 Cocina 21 Copper 21" Single Bowl Undermount Sink Cutout template depend on the substrate material. For natural granite, use 4000-5500 RPM with 30-50 IPM feed. For quartz composites, increase to 5500-7000 RPM at 45-65 IPM. The native profile requires careful attention to entry and exit points on the toolpath to prevent edge chipping. Program multiple depth passes rather than a single full-depth cut. Coolant temperature should remain below 70°F for optimal diamond tool performance. Dress profiling wheels after every 20-30 linear feet of cutting to maintain profile accuracy.
Material Compatibility
The Native Trails CPS215 Cocina 21 Copper 21" Single Bowl Undermount Sink Cutout template works exceptionally well with natural granite, providing clean edges that polish to a high gloss. Marble is also compatible, though the softer stone requires reduced feed rates during CNC operations to prevent micro-chipping. Quartzite offers excellent results with this profile, as the hard mineral structure holds fine details well. Engineered quartz composites are ideal substrates, offering consistent material properties that produce predictable results. Soapstone and slate can be profiled using this template with appropriate tooling adjustments. For limestone, use conservative CNC parameters due to the stone's tendency to chip on detailed profiles. Porcelain sintered stone panels require specialized diamond tooling but produce excellent results with the native geometry.
Where to Buy
Professional fabricators can source natural stone slabs from local stone distributors and wholesale suppliers. Visit SlabWise for template downloads and fabrication resources.