Nantucket Sinks NS3618-16 36x18 Undermount Single 36" Single Bowl Undermount Sink Cutout
Nantucket Sinks NS3618-16 36x18 Undermount Single 36" Single Bowl Undermount Sink Cutout
Description
The Nantucket Sinks NS3618-16 36x18 Undermount Single 36" Single Bowl Undermount Sink Cutout is a production-ready DXF template engineered for sinks fabrication projects. At standard dimensions, this template addresses the specific requirements of professional stone fabrication with accurate CNC-ready geometry. Fabricators benefit from standardized dimensions that reduce setup time and improve consistency. This template represents proven configurations used daily in professional fabrication shops.
Dimensions
- Overall Width
- 36"
- Overall Depth
- 18"
- Bowl Width
- 34"
- Bowl Depth
- 16"
- Corner Radius
- 0.375"
Specifications
- Manufacturer
- Nantucket Sinks
- Model Number
- NS3618-16
- Installation Type
- Undermount
- Bowl Configuration
- Single
- Material
- Stainless-Steel
- Min. Cabinet Width
- 39"
- Downloads
- 0
Related Templates
Nantucket Sinks ?FCF-2418-FS Cape 24 Fireclay Farmhouse 24" Single Bowl Farmhouse Sink Cutout
Nantucket Sinks
Nantucket Sinks ?FCF-3020-FS Cape 30 Fireclay Farmhouse 30" Single Bowl Farmhouse Sink Cutout
Nantucket Sinks
Nantucket Sinks ?FCF-3318D-FS Cape 33 Fireclay Farmhouse Double 33" Double Equal Bowl Farmhouse Sink Cutout
Nantucket Sinks
Nantucket Sinks NS09i-16 Rectangle 9 Undermount Bar 17" Single Bowl Undermount Sink Cutout
Nantucket Sinks
Answer summary
What is the Nantucket Sinks NS3618-16 36x18 Undermount Single 36" Single Bowl Undermount Sink Cutout DXF template for?
Nantucket Sinks NS3618-16 36x18 Undermount Single 36" Single Bowl Undermount Sink Cutout is a sink cutouts DXF template for countertop fabrication. Use it only after matching the manufacturer, model, dimensions, variant, and shop workflow to the actual job.
Risk check: Similar-looking products can use different cutout geometry. Confirm the official spec, shop tolerance, material behavior, and CNC output before production.
Next step: Run a DXF check, compare related templates, and keep the current manufacturer spec with the job packet.
Template decision guide
Should you use the Nantucket Sinks NS3618-16 36x18 Undermount Single 36" Single Bowl Undermount Sink Cutout DXF template?
Use the template page to shortlist a production file, then verify the exact model, variant, and machine workflow before cutting.
Best fit
Nantucket Sinks NS3618-16 36x18 Undermount Single 36" Single Bowl Undermount Sink Cutout is most useful when the product, manufacturer, model, install type, and variant match the job you are fabricating.
What to compare
Compare model number, dimensions, reveal or overhang, bowl or appliance geometry, material thickness, and CNC output requirements.
Risk check
Do not use a similar-looking template as a final production file. Small changes in flange, radius, trim, or reveal can cause a failed cutout.
Evidence to verify
Check the current manufacturer spec, field measurement, template preview, DXF layers, and a shop-approved tolerance before production.
Page-specific notes
Page-specific notes for Nantucket Sinks NS3618-16 36x18 Undermount Single 36" Single Bowl Undermount Sink Cutout
These notes are assembled from this exact template record, its category, available variants, and nearby template comparisons. They are meant to make the page more useful than a generic download page.
Exact record SlabWise is using
Nantucket Sinks NS3618-16 is filed under Sink Cutouts. The normalized record lists width 36", depth 18", bowl width 34", bowl depth 16", corner radius 0.375", so the safest use is as a production starting point that still gets checked against the current job packet.
Variant choice
This page exposes 4 variants: No Reveal (Flush), 1/8" Reveal, 1/2" Overhang, Drop-in. Pick the variant that matches reveal, overhang, install style, and shop standard before exporting to CAM.
Category-specific production check
Sink Cutouts files should be checked for fit against material thickness, edge treatment, sink or appliance clearance, CNC layer expectations, and the shop's preferred tolerance before cutting customer material.
Closest comparisons
Before choosing this file, compare it with Nantucket Sinks ?FCF-2418-FS Cape 24 Fireclay Farmhouse 24" Single Bowl Farmhouse Sink Cutout, Nantucket Sinks ?FCF-3020-FS Cape 30 Fireclay Farmhouse 30" Single Bowl Farmhouse Sink Cutout, Nantucket Sinks ?FCF-3318D-FS Cape 33 Fireclay Farmhouse Double 33" Double Equal Bowl Farmhouse Sink Cutout to catch small model, radius, flange, or layout differences that can change the final cut.
Evidence already attached
This page has extra enrichment for installation overview, CNC cutting notes, material compatibility, buying context. Use those notes as decision support, then keep the official product spec with the job.
The Nantucket Sinks NS3618-16 36x18 Undermount Single 36" Single Bowl Undermount Sink Cutout is a production-ready DXF template engineered for sinks fabrication projects. At standard dimensions, this template addresses the specific requirements of professional stone fabrication with accurate CNC-ready geometry. Fabricators benefit from standardized dimensions that reduce setup time and improve consistency. This template represents proven configurations used daily in professional fabrication shops.
Installation Overview
The fabrication process for the Nantucket Sinks NS3618-16 36x18 Undermount Single 36" Single Bowl Undermount Sink Cutout begins with DXF template verification and material selection. Import the template geometry into your CAM software, setting appropriate tool paths for the sinks specifications. Select diamond tooling rated for the specific stone material being processed. CNC cutting should proceed in stages: roughing passes followed by finishing passes at full depth. Maintain proper coolant flow throughout all machining operations. After all pieces are cut, perform any required edge finishing or polishing operations. Transport pieces to the installation site using appropriate lifting equipment and A-frame racks. On-site, verify cabinet or substrate preparation meets installation requirements. Apply adhesive in the recommended pattern and set pieces beginning with the largest section. Complete all joints with color-matched epoxy. Allow full cure time before loading the installation with fixtures or appliances. Seal all exposed surfaces with an appropriate stone sealer.
CNC Cutting Notes
CNC programming for the Nantucket Sinks NS3618-16 36x18 Undermount Single 36" Single Bowl Undermount Sink Cutout should account for tool wear compensation, especially on abrasive dolomite stones. Recommended parameters: spindle speed 4500-6500 RPM, feed rate 35-55 IPM for roughing. The nantucket geometry benefits from a two-pass strategy — rough to within 2mm of final profile, then finish at reduced feed rate (15-25 IPM). Use plunge rates no faster than 10 IPM to prevent tool breakage. Monitor vibration levels during cutting; excessive chatter indicates tool wear or incorrect speed/feed settings. Keep backup tooling on hand for production runs exceeding 50 linear feet of edge profile.
Material Compatibility
This nantucket profile is compatible with a wide range of countertop materials. Natural granite remains the most popular substrate, offering durability and an attractive polished finish. Engineered quartz performs excellently, with consistent material properties that make CNC cutting predictable and efficient. Marble requires more careful handling — reduce feed rates by 15-20% to prevent veining from causing unpredictable fractures. Quartzite is an excellent choice for this profile, as the material's hardness preserves fine geometric details through years of use. Dolomite and travertine can be profiled with adjusted parameters. Avoid ultra-thin porcelain slabs for complex profiles without proper backing support.
Where to Buy
Professional fabricators can source dolomite slabs from local stone distributors and wholesale suppliers. Visit SlabWise for template downloads and fabrication resources.