Nantucket Sinks ?FCF-2418-FS Cape 24 Fireclay Farmhouse 24" Single Bowl Farmhouse Sink Cutout
Description
Professional fabricators turn to the Nantucket Sinks ?FCF-2418-FS Cape 24 Fireclay Farmhouse 24" Single Bowl Farmhouse Sink Cutout template for accurate sinks production work. The standard dimensions specifications provide the exact geometry needed for CNC-based fabrication workflows. This DXF template eliminates manual layout work while ensuring every piece meets the tight tolerances required for quality installations. The design works well across multiple stone types and installation scenarios.
Dimensions
- Overall Width
- 23.25"
- Overall Depth
- 18"
- Bowl Width
- 21.625"
- Bowl Depth
- 16.18"
- Corner Radius
- 0.25"
Specifications
- Manufacturer
- Nantucket Sinks
- Model Number
- ?FCF-2418-FS
- Installation Type
- Farmhouse
- Bowl Configuration
- Single
- Material
- Fireclay
- Min. Cabinet Width
- 27"
- Downloads
- 0
Related Templates
Nantucket Sinks ?FCF-3020-FS Cape 30 Fireclay Farmhouse 30" Single Bowl Farmhouse Sink Cutout
Nantucket Sinks
Nantucket Sinks ?FCF-3318D-FS Cape 33 Fireclay Farmhouse Double 33" Double Equal Bowl Farmhouse Sink Cutout
Nantucket Sinks
Nantucket Sinks NS09i-16 Rectangle 9 Undermount Bar 17" Single Bowl Undermount Sink Cutout
Nantucket Sinks
Nantucket Sinks NS1715 17x15 Undermount Bar 17" Single Bowl Undermount Sink Cutout
Nantucket Sinks
Professional fabricators turn to the Nantucket Sinks ?FCF-2418-FS Cape 24 Fireclay Farmhouse 24" Single Bowl Farmhouse Sink Cutout template for accurate sinks production work. The standard dimensions specifications provide the exact geometry needed for CNC-based fabrication workflows. This DXF template eliminates manual layout work while ensuring every piece meets the tight tolerances required for quality installations. The design works well across multiple stone types and installation scenarios.
Installation Overview
The fabrication process for the Nantucket Sinks ?FCF-2418-FS Cape 24 Fireclay Farmhouse 24" Single Bowl Farmhouse Sink Cutout begins with DXF template verification and material selection. Import the template geometry into your CAM software, setting appropriate tool paths for the sinks specifications. Select diamond tooling rated for the specific stone material being processed. CNC cutting should proceed in stages: roughing passes followed by finishing passes at full depth. Maintain proper coolant flow throughout all machining operations. After all pieces are cut, perform any required edge finishing or polishing operations. Transport pieces to the installation site using appropriate lifting equipment and A-frame racks. On-site, verify cabinet or substrate preparation meets installation requirements. Apply adhesive in the recommended pattern and set pieces beginning with the largest section. Complete all joints with color-matched epoxy. Allow full cure time before loading the installation with fixtures or appliances. Seal all exposed surfaces with an appropriate stone sealer.
CNC Cutting Notes
Optimal CNC settings for the Nantucket Sinks ?FCF-2418-FS Cape 24 Fireclay Farmhouse 24" Single Bowl Farmhouse Sink Cutout template depend on the substrate material. For natural granite, use 4000-5500 RPM with 30-50 IPM feed. For quartz composites, increase to 5500-7000 RPM at 45-65 IPM. The nantucket profile requires careful attention to entry and exit points on the toolpath to prevent edge chipping. Program multiple depth passes rather than a single full-depth cut. Coolant temperature should remain below 70°F for optimal diamond tool performance. Dress profiling wheels after every 20-30 linear feet of cutting to maintain profile accuracy.
Material Compatibility
This nantucket profile is compatible with a wide range of countertop materials. Natural granite remains the most popular substrate, offering durability and an attractive polished finish. Engineered quartz performs excellently, with consistent material properties that make CNC cutting predictable and efficient. Marble requires more careful handling — reduce feed rates by 15-20% to prevent veining from causing unpredictable fractures. Quartzite is an excellent choice for this profile, as the material's hardness preserves fine geometric details through years of use. Dolomite and travertine can be profiled with adjusted parameters. Avoid ultra-thin porcelain slabs for complex profiles without proper backing support.
Where to Buy
Professional fabricators can source quartzite slabs from local stone distributors and wholesale suppliers. Visit SlabWise for template downloads and fabrication resources.