Franke PTX110-25 Pescara Undermount Sink - PTX110-25 Stainless steel Kitchen Cutout
Description
The Franke PTX110-25 Pescara Undermount Sink - PTX110-25 Stainless steel Kitchen Cutout is a production-ready DXF template engineered for sinks fabrication projects. At standard dimensions, this template addresses the specific requirements of professional stone fabrication with accurate CNC-ready geometry. Fabricators benefit from standardized dimensions that reduce setup time and improve consistency. This template represents proven configurations used daily in professional fabrication shops.
Dimensions
- Overall Width
- 9.48"
- Overall Depth
- 12.91"
- Bowl Width
- 7.4803"
- Bowl Depth
- 10.9055"
Specifications
- Manufacturer
- Franke
- Model Number
- PTX110-25
- Installation Type
- Undermount
- Bowl Configuration
- Single
- Material
- Stainless-Steel
- Min. Cabinet Width
- 12"
- Downloads
- 0
Related Templates
Franke CLV110-28 Crysta Undermount Sink- CLV110-28 Stainless steel Kitchen Cutout
Franke
Franke CUX110-30 Cube 32 Single Sink Cutout
Franke
Franke CUX11010 Culinary Center Sink - CUX11010-W Stainless steel Kitchen Cutout
Franke
Franke CUX11015 Cube Undermount Sink - CUX11015 Stainless steel Kitchen Cutout
Franke
The Franke PTX110-25 Pescara Undermount Sink - PTX110-25 Stainless steel Kitchen Cutout is a production-ready DXF template engineered for sinks fabrication projects. At standard dimensions, this template addresses the specific requirements of professional stone fabrication with accurate CNC-ready geometry. Fabricators benefit from standardized dimensions that reduce setup time and improve consistency. This template represents proven configurations used daily in professional fabrication shops.
Installation Overview
The fabrication process for the Franke PTX110-25 Pescara Undermount Sink - PTX110-25 Stainless steel Kitchen Cutout begins with DXF template verification and material selection. Import the template geometry into your CAM software, setting appropriate tool paths for the sinks specifications. Select diamond tooling rated for the specific stone material being processed. CNC cutting should proceed in stages: roughing passes followed by finishing passes at full depth. Maintain proper coolant flow throughout all machining operations. After all pieces are cut, perform any required edge finishing or polishing operations. Transport pieces to the installation site using appropriate lifting equipment and A-frame racks. On-site, verify cabinet or substrate preparation meets installation requirements. Apply adhesive in the recommended pattern and set pieces beginning with the largest section. Complete all joints with color-matched epoxy. Allow full cure time before loading the installation with fixtures or appliances. Seal all exposed surfaces with an appropriate stone sealer.
CNC Cutting Notes
Optimal CNC settings for the Franke PTX110-25 Pescara Undermount Sink - PTX110-25 Stainless steel Kitchen Cutout template depend on the substrate material. For natural granite, use 4000-5500 RPM with 30-50 IPM feed. For quartz composites, increase to 5500-7000 RPM at 45-65 IPM. The franke profile requires careful attention to entry and exit points on the toolpath to prevent edge chipping. Program multiple depth passes rather than a single full-depth cut. Coolant temperature should remain below 70°F for optimal diamond tool performance. Dress profiling wheels after every 20-30 linear feet of cutting to maintain profile accuracy.
Material Compatibility
This franke profile is compatible with a wide range of countertop materials. Natural granite remains the most popular substrate, offering durability and an attractive polished finish. Engineered quartz performs excellently, with consistent material properties that make CNC cutting predictable and efficient. Marble requires more careful handling — reduce feed rates by 15-20% to prevent veining from causing unpredictable fractures. Quartzite is an excellent choice for this profile, as the material's hardness preserves fine geometric details through years of use. Dolomite and travertine can be profiled with adjusted parameters. Avoid ultra-thin porcelain slabs for complex profiles without proper backing support.
Where to Buy
Professional fabricators can source engineered quartz slabs from local stone distributors and wholesale suppliers. Visit SlabWise for template downloads and fabrication resources.