Franke CUX11010 Culinary Center Sink - CUX11010-W Stainless steel Kitchen Cutout
Franke CUX11010 Culinary Center Sink - CUX11010-W Stainless steel Kitchen Cutout
Description
Professional fabricators turn to the Franke CUX11010 Culinary Center Sink - CUX11010-W Stainless steel Kitchen Cutout template for accurate sinks production work. The standard dimensions specifications provide the exact geometry needed for CNC-based fabrication workflows. This DXF template eliminates manual layout work while ensuring every piece meets the tight tolerances required for quality installations. The design works well across multiple stone types and installation scenarios.
Dimensions
- Overall Width
- 9.48"
- Overall Depth
- 12.91"
- Bowl Width
- 7.4803"
- Bowl Depth
- 10.9055"
Specifications
- Manufacturer
- Franke
- Model Number
- CUX11010
- Installation Type
- Undermount
- Bowl Configuration
- Single
- Material
- Stainless-Steel
- Min. Cabinet Width
- 12"
- Downloads
- 0
Related Templates
Franke CLV110-28 Crysta Undermount Sink- CLV110-28 Stainless steel Kitchen Cutout
Franke
Franke CUX110-30 Cube 32 Single Sink Cutout
Franke
Franke CUX11015 Cube Undermount Sink - CUX11015 Stainless steel Kitchen Cutout
Franke
Franke CUX11019 Cube Undermount Sink - CUX11019 Stainless steel Kitchen Cutout
Franke
Answer summary
What is the Franke CUX11010 Culinary Center Sink - CUX11010-W Stainless steel Kitchen Cutout DXF template for?
Franke CUX11010 Culinary Center Sink - CUX11010-W Stainless steel Kitchen Cutout is a sink cutouts DXF template for countertop fabrication. Use it only after matching the manufacturer, model, dimensions, variant, and shop workflow to the actual job.
Risk check: Similar-looking products can use different cutout geometry. Confirm the official spec, shop tolerance, material behavior, and CNC output before production.
Next step: Run a DXF check, compare related templates, and keep the current manufacturer spec with the job packet.
Template decision guide
Should you use the Franke CUX11010 Culinary Center Sink - CUX11010-W Stainless steel Kitchen Cutout DXF template?
Use the template page to shortlist a production file, then verify the exact model, variant, and machine workflow before cutting.
Best fit
Franke CUX11010 Culinary Center Sink - CUX11010-W Stainless steel Kitchen Cutout is most useful when the product, manufacturer, model, install type, and variant match the job you are fabricating.
What to compare
Compare model number, dimensions, reveal or overhang, bowl or appliance geometry, material thickness, and CNC output requirements.
Risk check
Do not use a similar-looking template as a final production file. Small changes in flange, radius, trim, or reveal can cause a failed cutout.
Evidence to verify
Check the current manufacturer spec, field measurement, template preview, DXF layers, and a shop-approved tolerance before production.
Page-specific notes
Page-specific notes for Franke CUX11010 Culinary Center Sink - CUX11010-W Stainless steel Kitchen Cutout
These notes are assembled from this exact template record, its category, available variants, and nearby template comparisons. They are meant to make the page more useful than a generic download page.
Exact record SlabWise is using
Franke CUX11010 is filed under Sink Cutouts. The normalized record lists width 9.48", depth 12.91", bowl width 7.4803", bowl depth 10.9055", so the safest use is as a production starting point that still gets checked against the current job packet.
Variant choice
This page exposes 4 variants: No Reveal (Flush), 1/8" Reveal, 1/2" Overhang, Drop-in. Pick the variant that matches reveal, overhang, install style, and shop standard before exporting to CAM.
Category-specific production check
Sink Cutouts files should be checked for fit against material thickness, edge treatment, sink or appliance clearance, CNC layer expectations, and the shop's preferred tolerance before cutting customer material.
Closest comparisons
Before choosing this file, compare it with Franke CLV110-28 Crysta Undermount Sink- CLV110-28 Stainless steel Kitchen Cutout, Franke CUX110-30 Cube 32 Single Sink Cutout, Franke CUX11015 Cube Undermount Sink - CUX11015 Stainless steel Kitchen Cutout to catch small model, radius, flange, or layout differences that can change the final cut.
Evidence already attached
This page has extra enrichment for installation overview, CNC cutting notes, material compatibility, buying context. Use those notes as decision support, then keep the official product spec with the job.
Professional fabricators turn to the Franke CUX11010 Culinary Center Sink - CUX11010-W Stainless steel Kitchen Cutout template for accurate sinks production work. The standard dimensions specifications provide the exact geometry needed for CNC-based fabrication workflows. This DXF template eliminates manual layout work while ensuring every piece meets the tight tolerances required for quality installations. The design works well across multiple stone types and installation scenarios.
Installation Overview
Installing the Franke CUX11010 Culinary Center Sink - CUX11010-W Stainless steel Kitchen Cutout template requires standard stone fabrication procedures adapted for the sinks category. Begin with accurate field measurements to verify the template dimensions match the installation site. Import the DXF file into CNC programming software and create an optimized cutting plan that minimizes material waste. For the cutting phase, select appropriate diamond tooling based on the stone type being fabricated. Maintain consistent coolant flow during all CNC operations to prevent thermal damage. After cutting, perform edge finishing according to the template specifications. Dry-fit all pieces at the installation site before applying adhesive. Use construction-grade silicone or epoxy appropriate for stone installations. Ensure proper support for all sections, adding brackets where overhangs exceed manufacturer recommendations. Apply a penetrating sealer after installation to protect the finished surface. Final inspection should verify all dimensions match the template within acceptable tolerances.
CNC Cutting Notes
Optimal CNC settings for the Franke CUX11010 Culinary Center Sink - CUX11010-W Stainless steel Kitchen Cutout template depend on the substrate material. For natural granite, use 4000-5500 RPM with 30-50 IPM feed. For quartz composites, increase to 5500-7000 RPM at 45-65 IPM. The franke profile requires careful attention to entry and exit points on the toolpath to prevent edge chipping. Program multiple depth passes rather than a single full-depth cut. Coolant temperature should remain below 70°F for optimal diamond tool performance. Dress profiling wheels after every 20-30 linear feet of cutting to maintain profile accuracy.
Material Compatibility
This franke profile is compatible with a wide range of countertop materials. Natural granite remains the most popular substrate, offering durability and an attractive polished finish. Engineered quartz performs excellently, with consistent material properties that make CNC cutting predictable and efficient. Marble requires more careful handling — reduce feed rates by 15-20% to prevent veining from causing unpredictable fractures. Quartzite is an excellent choice for this profile, as the material's hardness preserves fine geometric details through years of use. Dolomite and travertine can be profiled with adjusted parameters. Avoid ultra-thin porcelain slabs for complex profiles without proper backing support.
Where to Buy
Professional fabricators can source natural stone slabs from local stone distributors and wholesale suppliers. Visit SlabWise for template downloads and fabrication resources.