BocchiI 1618 DFX Cutout
BocchiI 1618 DFX Cutout
Description
Production-ready DXF cutout template for the BOCCHI 1618 DFX 46.0" x 36.0" single bowl undermount sink. Available in 4 variants: no reveal, 1/8" reveal, 1/2" overhang, and drop-in.
Dimensions
- Overall Width
- 33.75"
- Overall Depth
- 20"
- Bowl Width
- 31"
- Bowl Depth
- 16"
Specifications
- Manufacturer
- Bocchi
- Model Number
- 1618
- Installation Type
- Undermount
- Bowl Configuration
- Single
- Material
- Fireclay
- Min. Cabinet Width
- 48"
- Downloads
- 0
Related Templates
BocchiI 1359 DXF Cutout
Bocchi
BocchiI 1360 DXF Cutout
Bocchi
BocchiI 1362 DXF Cutout
Bocchi
Bocchi 1500-001-0120 Sotto 18 Undermount Fireclay 18" Single Bowl Undermount Sink Cutout
Bocchi
Answer summary
What is the BocchiI 1618 DFX Cutout DXF template for?
BocchiI 1618 DFX Cutout is a sink cutouts DXF template for countertop fabrication. Use it only after matching the manufacturer, model, dimensions, variant, and shop workflow to the actual job.
Risk check: Similar-looking products can use different cutout geometry. Confirm the official spec, shop tolerance, material behavior, and CNC output before production.
Next step: Run a DXF check, compare related templates, and keep the current manufacturer spec with the job packet.
Template decision guide
Should you use the BocchiI 1618 DFX Cutout DXF template?
Use the template page to shortlist a production file, then verify the exact model, variant, and machine workflow before cutting.
Best fit
BocchiI 1618 DFX Cutout is most useful when the product, manufacturer, model, install type, and variant match the job you are fabricating.
What to compare
Compare model number, dimensions, reveal or overhang, bowl or appliance geometry, material thickness, and CNC output requirements.
Risk check
Do not use a similar-looking template as a final production file. Small changes in flange, radius, trim, or reveal can cause a failed cutout.
Evidence to verify
Check the current manufacturer spec, field measurement, template preview, DXF layers, and a shop-approved tolerance before production.
Page-specific notes
Page-specific notes for BocchiI 1618 DFX Cutout
These notes are assembled from this exact template record, its category, available variants, and nearby template comparisons. They are meant to make the page more useful than a generic download page.
Exact record SlabWise is using
Bocchi 1618 is filed under Sink Cutouts. The normalized record lists width 33.75", depth 20", bowl width 31", bowl depth 16", so the safest use is as a production starting point that still gets checked against the current job packet.
Variant choice
This page exposes 4 variants: No Reveal (Flush), 1/8" Reveal, 1/2" Overhang, Drop-in. Pick the variant that matches reveal, overhang, install style, and shop standard before exporting to CAM.
Category-specific production check
Sink Cutouts files should be checked for fit against material thickness, edge treatment, sink or appliance clearance, CNC layer expectations, and the shop's preferred tolerance before cutting customer material.
Closest comparisons
Before choosing this file, compare it with BocchiI 1359 DXF Cutout, BocchiI 1360 DXF Cutout, BocchiI 1362 DXF Cutout to catch small model, radius, flange, or layout differences that can change the final cut.
Evidence already attached
This page has extra enrichment for installation overview, CNC cutting notes, material compatibility, buying context. Use those notes as decision support, then keep the official product spec with the job.
The Bocchi 1618 DFX is a professional-grade undermount fireclay sink featuring a generous single bowl design ideal for commercial and residential installations. This premium sink measures 33.75" x 20" overall with a deep 9" bowl that provides exceptional capacity for large pots and pans. Crafted from 100% natural fireclay and fired at temperatures up to 2000°F, the 1618 offers extreme resistance to chipping, scratching, and thermal shock. Our production-ready DXF cutout templates include four installation variants to support undermount, drop-in, and semi-reveal workstation configurations, ensuring precise CNC fabrication for quartz, granite, and solid surface countertops.
Installation Overview
Installing the Bocchi 1618 DFX requires careful planning due to its substantial size and weight. The sink weighs approximately 55 pounds and demands a minimum 48-inch wide base cabinet with reinforced support structures. For undermount installations, use the no-reveal or 1/8" reveal template to create a seamless transition between sink and countertop. The 1/2" overhang variant provides additional lip support for the fireclay rim, while the drop-in template accommodates top-mount installations. The semi-reveal option creates an 11/16" ledge suitable for workstation accessories like cutting boards and colanders. Before cutting, verify dimensions against your actual sink as fireclay production may yield minor size variations. The installation is compatible with garbage disposals without requiring extension flanges, and the sink's non-porous glazed surface resists stains and bacteria while simplifying cleanup.
CNC Cutting Notes
When programming your CNC for the Bocchi 1618 cutout, prioritize chip-free edges by using diamond-coated router bits specifically designed for natural stone materials. Set your feed rate between 60-100 inches per minute depending on material hardness, and maintain a spindle speed of 10,000-15,000 RPM for quartz and granite. Implement ramped entry cuts rather than plunge cuts to minimize stress fractures, especially near corners. For undermount installations, add a 3-5 degree bevel to the cutout edge to facilitate sink clip installation and ensure proper adhesion with silicone or epoxy mounting systems. Always perform a dry-fit test with the actual sink before final adhesive application, as fireclay sinks may vary slightly from template specifications due to their handcrafted nature.
Material Compatibility
The Bocchi 1618 DFX cutout templates are optimized for natural stone and engineered countertop materials including granite, marble, quartzite, quartz composite, and solid surface products. The fireclay sink's substantial weight and heat resistance make it ideal for professional-grade installations where thermal durability is paramount. When working with thinner materials like 2CM quartz, ensure adequate undermount support using sink rails or plywood reinforcement attached to the cabinet frame. For granite and quartzite installations, the stone's natural strength provides excellent support for undermount configurations. Laminate countertops should only use the drop-in variant due to weight considerations and edge exposure limitations. The sink's non-porous fireclay surface pairs exceptionally well with sealed natural stone, creating a cohesive aesthetic while maintaining hygiene standards in food preparation areas.
Where to Buy
Bocchi sinks are available through authorized dealers including The Home Depot, Amazon, The Sink Boutique, Annie & Oak, DirectSinks, and Manor House Sinks. For the best selection and expert guidance, visit The Sink Boutique or Annie & Oak, both authorized Bocchi retailers offering comprehensive sink bundles with coordinating faucets and accessories. Purchase directly from bocchiusa.com for the complete manufacturer warranty and support. Prices for Bocchi fireclay sinks typically range from $500-$1,000 depending on size and finish options.