BocchiI 1362 DXF Cutout
BocchiI 1362 DXF Cutout
Description
Production-ready DXF cutout template for the BOCCHI 1362 DXF 35.08" x 25.36" single bowl undermount sink. Available in 4 variants: no reveal, 1/8" reveal, 1/2" overhang, and drop-in.
Dimensions
- Overall Width
- 35.08"
- Overall Depth
- 25.36"
- Bowl Width
- 33.077"
- Bowl Depth
- 23.3624"
Specifications
- Manufacturer
- Bocchi
- Model Number
- 1362
- Installation Type
- Undermount
- Bowl Configuration
- Single
- Material
- Fireclay
- Min. Cabinet Width
- 37"
- Downloads
- 0
Related Templates
BocchiI 1359 DXF Cutout
Bocchi
BocchiI 1360 DXF Cutout
Bocchi
Bocchi 1500-001-0120 Sotto 18 Undermount Fireclay 18" Single Bowl Undermount Sink Cutout
Bocchi
Bocchi 1504-001-0120 Sotto 32 Undermount Fireclay 32" Single Bowl Undermount Sink Cutout
Bocchi
Answer summary
What is the BocchiI 1362 DXF Cutout DXF template for?
BocchiI 1362 DXF Cutout is a sink cutouts DXF template for countertop fabrication. Use it only after matching the manufacturer, model, dimensions, variant, and shop workflow to the actual job.
Risk check: Similar-looking products can use different cutout geometry. Confirm the official spec, shop tolerance, material behavior, and CNC output before production.
Next step: Run a DXF check, compare related templates, and keep the current manufacturer spec with the job packet.
Template decision guide
Should you use the BocchiI 1362 DXF Cutout DXF template?
Use the template page to shortlist a production file, then verify the exact model, variant, and machine workflow before cutting.
Best fit
BocchiI 1362 DXF Cutout is most useful when the product, manufacturer, model, install type, and variant match the job you are fabricating.
What to compare
Compare model number, dimensions, reveal or overhang, bowl or appliance geometry, material thickness, and CNC output requirements.
Risk check
Do not use a similar-looking template as a final production file. Small changes in flange, radius, trim, or reveal can cause a failed cutout.
Evidence to verify
Check the current manufacturer spec, field measurement, template preview, DXF layers, and a shop-approved tolerance before production.
Page-specific notes
Page-specific notes for BocchiI 1362 DXF Cutout
These notes are assembled from this exact template record, its category, available variants, and nearby template comparisons. They are meant to make the page more useful than a generic download page.
Exact record SlabWise is using
Bocchi 1362 is filed under Sink Cutouts. The normalized record lists width 35.08", depth 25.36", bowl width 33.077", bowl depth 23.3624", so the safest use is as a production starting point that still gets checked against the current job packet.
Variant choice
This page exposes 4 variants: No Reveal (Flush), 1/8" Reveal, 1/2" Overhang, Drop-in. Pick the variant that matches reveal, overhang, install style, and shop standard before exporting to CAM.
Category-specific production check
Sink Cutouts files should be checked for fit against material thickness, edge treatment, sink or appliance clearance, CNC layer expectations, and the shop's preferred tolerance before cutting customer material.
Closest comparisons
Before choosing this file, compare it with BocchiI 1359 DXF Cutout, BocchiI 1360 DXF Cutout, Bocchi 1500-001-0120 Sotto 18 Undermount Fireclay 18" Single Bowl Undermount Sink Cutout to catch small model, radius, flange, or layout differences that can change the final cut.
Evidence already attached
This page has extra enrichment for installation overview, CNC cutting notes, material compatibility, buying context. Use those notes as decision support, then keep the official product spec with the job.
Professional fabricators turn to the BocchiI 1362 DXF Cutout template for accurate sinks production work. The standard dimensions specifications provide the exact geometry needed for CNC-based fabrication workflows. This DXF template eliminates manual layout work while ensuring every piece meets the tight tolerances required for quality installations. The design works well across multiple stone types and installation scenarios.
Installation Overview
Installing the BocchiI 1362 DXF Cutout template requires standard stone fabrication procedures adapted for the sinks category. Begin with accurate field measurements to verify the template dimensions match the installation site. Import the DXF file into CNC programming software and create an optimized cutting plan that minimizes material waste. For the cutting phase, select appropriate diamond tooling based on the stone type being fabricated. Maintain consistent coolant flow during all CNC operations to prevent thermal damage. After cutting, perform edge finishing according to the template specifications. Dry-fit all pieces at the installation site before applying adhesive. Use construction-grade silicone or epoxy appropriate for stone installations. Ensure proper support for all sections, adding brackets where overhangs exceed manufacturer recommendations. Apply a penetrating sealer after installation to protect the finished surface. Final inspection should verify all dimensions match the template within acceptable tolerances.
CNC Cutting Notes
For the BocchiI 1362 DXF Cutout profile, set your CNC router spindle speed between 5000-7000 RPM for natural stone substrates. Use a feed rate of 40-60 IPM for roughing passes and reduce to 20-30 IPM for finishing passes. Select a diamond-tipped profile bit matching the template radius specifications. Program the toolpath using climb milling for cleaner cuts on the bocchi geometry. Maintain coolant flow at 2+ GPM to prevent thermal fracturing. For harder stones like granite, reduce feed rates by 20% and increase water flow. Run a test cut on scrap material to verify the profile matches the DXF template before committing to production stock.
Material Compatibility
The BocchiI 1362 DXF Cutout template works exceptionally well with natural granite, providing clean edges that polish to a high gloss. Marble is also compatible, though the softer stone requires reduced feed rates during CNC operations to prevent micro-chipping. Quartzite offers excellent results with this profile, as the hard mineral structure holds fine details well. Engineered quartz composites are ideal substrates, offering consistent material properties that produce predictable results. Soapstone and slate can be profiled using this template with appropriate tooling adjustments. For limestone, use conservative CNC parameters due to the stone's tendency to chip on detailed profiles. Porcelain sintered stone panels require specialized diamond tooling but produce excellent results with the bocchi geometry.
Where to Buy
Professional fabricators can source natural stone slabs from local stone distributors and wholesale suppliers. Visit SlabWise for template downloads and fabrication resources.