Bocchi 1505-001-0120 Sotto 27 Undermount Fireclay 27" Single Bowl Undermount Sink Cutout
Description
Production-ready DXF cutout template for the Bocchi 1505-001-0120 Sotto 27 Undermount Fireclay 36" x 19" single bowl undermount sink. Available in 4 variants: no reveal, 1/8" reveal, 1/2" overhang, and drop-in.
Dimensions
- Overall Width
- 36"
- Overall Depth
- 19"
- Bowl Width
- 34.5"
- Bowl Depth
- 17.5"
- Corner Radius
- 0.25"
Specifications
- Manufacturer
- Bocchi
- Model Number
- 1505-001-0120
- Installation Type
- Undermount
- Bowl Configuration
- Single
- Material
- Fireclay
- Min. Cabinet Width
- 30"
- Downloads
- 0
Related Templates
BocchiI 1359 DXF Cutout
Bocchi
BocchiI 1360 DXF Cutout
Bocchi
BocchiI 1362 DXF Cutout
Bocchi
Bocchi 1500-001-0120 Sotto 18 Undermount Fireclay 18" Single Bowl Undermount Sink Cutout
Bocchi
Professional fabricators turn to the Bocchi 1505-001-0120 Sotto 27 Undermount Fireclay 27" Single Bowl Undermount Sink Cutout template for accurate sinks production work. The standard dimensions specifications provide the exact geometry needed for CNC-based fabrication workflows. This DXF template eliminates manual layout work while ensuring every piece meets the tight tolerances required for quality installations. The design works well across multiple stone types and installation scenarios.
Installation Overview
Installing the Bocchi 1505-001-0120 Sotto 27 Undermount Fireclay 27" Single Bowl Undermount Sink Cutout template requires standard stone fabrication procedures adapted for the sinks category. Begin with accurate field measurements to verify the template dimensions match the installation site. Import the DXF file into CNC programming software and create an optimized cutting plan that minimizes material waste. For the cutting phase, select appropriate diamond tooling based on the stone type being fabricated. Maintain consistent coolant flow during all CNC operations to prevent thermal damage. After cutting, perform edge finishing according to the template specifications. Dry-fit all pieces at the installation site before applying adhesive. Use construction-grade silicone or epoxy appropriate for stone installations. Ensure proper support for all sections, adding brackets where overhangs exceed manufacturer recommendations. Apply a penetrating sealer after installation to protect the finished surface. Final inspection should verify all dimensions match the template within acceptable tolerances.
CNC Cutting Notes
Optimal CNC settings for the Bocchi 1505-001-0120 Sotto 27 Undermount Fireclay 27" Single Bowl Undermount Sink Cutout template depend on the substrate material. For natural granite, use 4000-5500 RPM with 30-50 IPM feed. For quartz composites, increase to 5500-7000 RPM at 45-65 IPM. The bocchi profile requires careful attention to entry and exit points on the toolpath to prevent edge chipping. Program multiple depth passes rather than a single full-depth cut. Coolant temperature should remain below 70°F for optimal diamond tool performance. Dress profiling wheels after every 20-30 linear feet of cutting to maintain profile accuracy.
Material Compatibility
The Bocchi 1505-001-0120 Sotto 27 Undermount Fireclay 27" Single Bowl Undermount Sink Cutout profile pairs best with medium-to-hard natural stones and engineered materials. Granite is the ideal substrate, offering the hardness needed to maintain the bocchi geometry while accepting a brilliant polish. Quartz composites provide consistent results with minimal tool wear variation. For softer stones like marble or limestone, the profile remains achievable but requires adjusted CNC parameters and additional care during finishing. Exotic stones such as quartzite and super-white dolomite produce stunning results with this profile. Sintered stone panels are compatible when using specialized thin-material tooling. Always perform a test cut on representative material before beginning production runs.
Where to Buy
Professional fabricators can source natural stone slabs from local stone distributors and wholesale suppliers. Visit SlabWise for template downloads and fabrication resources.