American Standard 18SB9332200A-D Pekoe 33 Single Sink Cutout
Description
The American Standard Pekoe 18SB9332200A-D is a premium 33-inch single bowl undermount farmhouse sink crafted from 18-gauge stainless steel. This professional-grade DXF template provides countertop fabricators with precision-engineered cutout patterns for seamless installation in granite, quartz, and solid surface countertops. The Pekoe series features SoundSecure+ technology with rubber sound pads and StoneLock multi-layer spray insulation, making it an ideal choice for residential and light commercial applications. Our template package includes four installation variants: no reveal (flush mount), 1/8-inch reveal (standard undermount), 1/2-inch overhang (maximum support), and drop-in configuration, ensuring compatibility with any fabrication workflow.
Dimensions
- Overall Width
- 33"
- Overall Depth
- 22"
- Bowl Width
- 30.25"
- Bowl Depth
- 16.5625"
- Corner Radius
- 0.375"
Specifications
- Manufacturer
- American Standard
- Model Number
- 18SB9332200A-D
- Installation Type
- Undermount
- Bowl Configuration
- Single
- Material
- Stainless-Steel
- Min. Cabinet Width
- 36"
- Downloads
- 0
Related Templates
American Standard 18CR9332200A Avery 33 Workstation Sink Cutout
American Standard
American Standard 18SB0252200A Avery 25 Undermount Sink Cutout
American Standard
American Standard 18SB6252200A Pekoe 25 Single Sink Cutout
American Standard
American Standard 18SB9252200A Edgewater 25 Single Sink Cutout
American Standard
The American Standard Pekoe 18SB9332200A-D is a premium 33-inch single bowl undermount farmhouse sink crafted from 18-gauge stainless steel. This professional-grade DXF template provides countertop fabricators with precision-engineered cutout patterns for seamless installation in granite, quartz, and solid surface countertops. The Pekoe series features SoundSecure+ technology with rubber sound pads and StoneLock multi-layer spray insulation, making it an ideal choice for residential and light commercial applications. Our template package includes four installation variants: no reveal (flush mount), 1/8-inch reveal (standard undermount), 1/2-inch overhang (maximum support), and drop-in configuration, ensuring compatibility with any fabrication workflow.
Installation Overview
Installing the American Standard Pekoe 18SB9332200A-D requires careful attention to undermount and farmhouse apron-front installation techniques. For undermount installations, the bowl dimensions of 30.25" x 16.5625" provide the foundation for your cutout calculations. The no-reveal variant creates a flush-mounted edge where the sink rim aligns perfectly with the countertop cutout, ideal for frameless installations. The 1/8-inch reveal option is the most common choice among fabricators, providing a small lip that supports the sink weight while creating a clean visual line. For maximum structural support in heavy stone materials like granite or quartzite, the 1/2-inch overhang variant reduces the cutout to 29.25" x 15.5625", allowing substantial material to support the sink perimeter. The apron-front farmhouse style requires cabinet modification to accommodate the 9-inch front-facing bowl depth. Always verify cabinet compatibility (minimum 36-inch width required) before cutting. This sink's 10mm radius corners require CNC machines with adequate bit compensation to achieve the precise curves without stress points.
CNC Cutting Notes
When programming your CNC router for the Pekoe 18SB9332200A-D template, use a 3/8-inch or 1/2-inch diameter upcut spiral bit for optimal edge quality on stone materials. The corner radius of 0.375 inches demands careful toolpath programming with proper lead-in and lead-out moves to prevent chip-out at the transition points. Set your feed rate between 80-120 inches per minute for granite and quartz, reducing to 60-80 IPM for quartzite and other dense materials. Plunge depth should be executed in multiple passes: rough out at 0.25-inch depth increments, then finish with a final 0.125-inch pass for smooth edges. For the 1/8-inch and 1/2-inch reveal variants, precision is critical as these measurements directly affect sink fit and reveal consistency around the perimeter. Always perform a dry fit with the physical sink before applying adhesive, as stainless steel sinks can have slight manufacturing variances of ±1/16 inch. Apply coolant or water to the cut zone when working with quartz to prevent resin burn and extend bit life. After cutting, finish edges with 50-grit, 120-grit, and 220-grit diamond polishing pads for undermount installations where the edge will be visible beneath the sink rim.
Material Compatibility
This DXF template is engineered for use with all common countertop materials including granite, quartz, quartzite, marble, and solid surface materials like Corian. The 18-gauge stainless steel construction of the Pekoe sink weighs approximately 35-40 pounds when empty, requiring adequate material thickness and support structure. For granite and quartzite installations, a minimum 3cm (1.25-inch) slab thickness is recommended, with 2cm requiring additional plywood substrate and undermount sink clips rated for 50+ pounds. Quartz countertops perform excellently with this sink due to their consistent density and engineered composition, though care must be taken during cutting to prevent heat damage to the resin binder. Marble installations should use the 1/2-inch overhang variant to maximize material support, as marble's softer structure benefits from the additional contact area. Solid surface materials like Corian can accommodate any variant but typically use the 1/8-inch reveal for optimal adhesion with silicone and epoxy bonding agents. For ultra-thin porcelain slabs (6mm-12mm), consult with sink clip manufacturers for specialized undermount hardware, as traditional methods may not provide adequate support. Always reinforce cutout corners with epoxy or polyester resin, regardless of material type, to prevent stress fractures during sink installation and long-term use.
Where to Buy
The American Standard Pekoe 18SB9332200A-D (model 18SB.9332200A.075S) is available through major plumbing distributors and online retailers. Ferguson and F.W. Webb stock this model for wholesale trade accounts with typical pricing around $800-$900. Retail options include Lowe's, where it's sold as part of an all-in-one kit with drainboard accessories, and Build.com, which offers competitive pricing with free shipping on orders over $49. The sink is also available through WebstaurantStore for commercial and residential applications, often with basin racks and basket strainers included. For fabricators purchasing in volume, contact American Standard's trade sales division for contractor pricing and direct shipping to job sites. When ordering, verify the complete model number (18SB.9332200A.075S) to ensure you receive the single bowl variant, as American Standard's naming convention can be confusing with similar product line extensions. The sink comes with a limited lifetime warranty when purchased through authorized American Standard dealers. Most suppliers offer free specification sheets and installation guides upon request, which should be provided to end customers as part of your fabrication service documentation.