American Standard 18CR9332200A Avery 33 Workstation Sink Cutout
Description
Undermount workstation sinks represent the pinnacle of modern kitchen functionality, combining the sleek aesthetics of undermount installation with the versatility of integrated prep accessories. This production-ready DXF template for the American Standard 18CR9332200A Avery 33 Workstation sink enables countertop fabricators to execute precise cutouts for this premium sink installation. The Avery workstation series transforms the traditional sink into a multifunctional command center with integrated ledges that support cutting boards, colanders, and drying racks. Our template includes four cutout variants with different reveal options, allowing you to tailor the installation to your customer's preferences and countertop material characteristics.
Dimensions
- Overall Width
- 33"
- Overall Depth
- 22"
- Bowl Width
- 30"
- Bowl Depth
- 18"
- Corner Radius
- 0.375"
Specifications
- Manufacturer
- American Standard
- Model Number
- 18CR9332200A
- Installation Type
- Undermount
- Bowl Configuration
- Single
- Material
- Stainless-Steel
- Min. Cabinet Width
- 36"
- Downloads
- 0
Related Templates
American Standard 18SB0252200A Avery 25 Undermount Sink Cutout
American Standard
American Standard 18SB6252200A Pekoe 25 Single Sink Cutout
American Standard
American Standard 18SB9252200A Edgewater 25 Single Sink Cutout
American Standard
American Standard 18SB9332200A-D Pekoe 33 Single Sink Cutout
American Standard
Answer summary
What is the American Standard 18CR9332200A Avery 33 Workstation Sink Cutout DXF template for?
American Standard 18CR9332200A Avery 33 Workstation Sink Cutout is a sink cutouts DXF template for countertop fabrication. Use it only after matching the manufacturer, model, dimensions, variant, and shop workflow to the actual job.
Risk check: Similar-looking products can use different cutout geometry. Confirm the official spec, shop tolerance, material behavior, and CNC output before production.
Next step: Run a DXF check, compare related templates, and keep the current manufacturer spec with the job packet.
Template decision guide
Should you use the American Standard 18CR9332200A Avery 33 Workstation Sink Cutout DXF template?
Use the template page to shortlist a production file, then verify the exact model, variant, and machine workflow before cutting.
Best fit
American Standard 18CR9332200A Avery 33 Workstation Sink Cutout is most useful when the product, manufacturer, model, install type, and variant match the job you are fabricating.
What to compare
Compare model number, dimensions, reveal or overhang, bowl or appliance geometry, material thickness, and CNC output requirements.
Risk check
Do not use a similar-looking template as a final production file. Small changes in flange, radius, trim, or reveal can cause a failed cutout.
Evidence to verify
Check the current manufacturer spec, field measurement, template preview, DXF layers, and a shop-approved tolerance before production.
Page-specific notes
Page-specific notes for American Standard 18CR9332200A Avery 33 Workstation Sink Cutout
These notes are assembled from this exact template record, its category, available variants, and nearby template comparisons. They are meant to make the page more useful than a generic download page.
Exact record SlabWise is using
American Standard 18CR9332200A is filed under Sink Cutouts. The normalized record lists width 33", depth 22", bowl width 30", bowl depth 18", corner radius 0.375", so the safest use is as a production starting point that still gets checked against the current job packet.
Variant choice
This page exposes 4 variants: No Reveal (Flush), 1/8" Reveal, 1/2" Overhang, Drop-in. Pick the variant that matches reveal, overhang, install style, and shop standard before exporting to CAM.
Category-specific production check
Sink Cutouts files should be checked for fit against material thickness, edge treatment, sink or appliance clearance, CNC layer expectations, and the shop's preferred tolerance before cutting customer material.
Closest comparisons
Before choosing this file, compare it with American Standard 18SB0252200A Avery 25 Undermount Sink Cutout, American Standard 18SB6252200A Pekoe 25 Single Sink Cutout, American Standard 18SB9252200A Edgewater 25 Single Sink Cutout to catch small model, radius, flange, or layout differences that can change the final cut.
Evidence already attached
This page has extra enrichment for installation overview, CNC cutting notes, material compatibility, buying context. Use those notes as decision support, then keep the official product spec with the job.
Undermount workstation sinks represent the pinnacle of modern kitchen functionality, combining the sleek aesthetics of undermount installation with the versatility of integrated prep accessories. This production-ready DXF template for the American Standard 18CR9332200A Avery 33 Workstation sink enables countertop fabricators to execute precise cutouts for this premium sink installation. The Avery workstation series transforms the traditional sink into a multifunctional command center with integrated ledges that support cutting boards, colanders, and drying racks. Our template includes four cutout variants with different reveal options, allowing you to tailor the installation to your customer's preferences and countertop material characteristics.
Installation Overview
The American Standard Avery 33 Workstation undermount sink measures 33 inches wide by 22 inches deep overall, with a 30 x 18 inch interior bowl that's 10 inches deep. Undermount installation creates a seamless look where countertop edges are fully exposed, allowing for easy cleanup by sweeping debris directly into the sink. This installation method requires polished stone edges and precise cutout dimensions. The workstation features include factory-molded ledges that support accessories, creating multiple work zones within the sink area. When fabricating for undermount installation, consider these key factors: the cutout edge will be visible and must be polished to match the countertop finish, precise measurements are critical as the sink attaches from underneath with no visible rim to conceal errors, the undermount clips or brackets must have adequate clearance for installation, and the bowl depth of 10 inches requires careful consideration of cabinet clearances for plumbing and garbage disposal installation. Our template offers four options: no reveal at 30 x 18 inches creates a flush relationship between bowl edge and countertop cutout, 1/8 inch reveal at 29.75 x 17.75 inches allows the countertop to extend slightly into the bowl opening for a refined look and easier cleaning, 1/2 inch overhang at 29 x 17 inches provides maximum countertop extension into the opening, and the drop-in variant at 33 x 22 inches can be used for alternative installation methods. The 10-inch bowl depth provides substantial capacity and works with the workstation accessories to create distinct zones for washing, prep, and draining. Always verify the undermount clip positions before cutting - some clips require specific clearances or may conflict with sink accessories.
CNC Cutting Notes
Undermount sink cutouts demand higher precision than drop-in installations because the cut edge is fully visible and forms part of the finished aesthetic. Program your CNC to execute the 0.375-inch corner radius accurately using a 1/2 inch or 3/4 inch diameter diamond router bit. For granite and quartz undermount applications, use feed rates of 50-80 IPM with spindle speeds of 10,000-12,000 RPM, applying constant water cooling throughout the cut. The visible edge requires additional finishing steps beyond the initial CNC cut: after cutting the opening, the edge must be polished to match the countertop surface finish (typically to at least 400 grit, preferably 800 grit or higher), a slight bevel of 1-2 degrees on the underside edge helps the sink seat properly and prevents the sharp 90-degree edge from chipping, and the corner radii must be perfectly smooth - any tool marks or irregularities will be visible and can interfere with sink seating. When cutting the 30 x 18 inch opening (no reveal variant), ensure your support system keeps the cutout piece stable throughout the process. The undermount installation means the sink's weight hangs from the countertop via clips or adhesive, so the cut edge must be structurally sound with no micro-cracks or stress points. For the 1/8 inch reveal option (29.75 x 17.75 inch cutout), the countertop extends 1/8 inch past the sink bowl on all sides, creating a small ledge that facilitates cleanup and provides a finished appearance. This is the most popular option for undermount sinks. Program your tool paths to maintain consistent reveal dimension around the entire perimeter - variations will be immediately visible. The workstation design includes accessory ledges inside the sink bowl, which don't affect the cutout but do require consideration when positioning the sink during installation. After CNC cutting, use hand polishing or edge polishing machinery to bring the cut edge to final finish. Any deviation in the corner radius or edge straightness becomes a permanent part of the installation, so take time to verify your CNC programming before cutting valuable material.
Material Compatibility
Granite: Ideal for undermount applications. Granite polishes beautifully and provides excellent structural support for hanging sink weight. All granite colors work well. Quartz: Perfect match for undermount workstation sinks. Engineered quartz provides consistent edge finishing and excellent long-term support. Most popular choice. Marble: Beautiful but requires extra care. Marble's softer nature means gentle polishing techniques are essential. Consider sealing the exposed edge. Quartzite: Outstanding performance for undermount installations. The extremely hard material polishes to a brilliant finish and provides superior strength. Solid Surface: Works well with undermount sinks. Solid surface edges can be finished seamlessly and offer good support when properly reinforced. Butcher Block: Undermount installation in wood requires extensive waterproofing. The exposed edge must be sealed with multiple coats of marine-grade sealant. Concrete: Excellent for undermount installations. The edge can be finished and sealed to complement the concrete aesthetic. Professional sealing required. Soapstone: Compatible with undermount sinks. Soapstone's soft nature requires careful edge finishing but creates a unique aesthetic with the exposed edge.
Where to Buy
Intro: The American Standard 18CR9332200A Avery 33 Workstation undermount sink is available through professional plumbing distributors and specialty kitchen retailers who cater to high-end installations. Retailers: Name: Ferguson Description: Leading professional plumbing distributor with extensive American Standard inventory. Trade accounts offer competitive pricing and technical support for undermount installations. Url: https://www.ferguson.com Name: Build.com Description: Online specialty retailer with detailed specifications and competitive pricing on American Standard workstation sinks. Url: https://www.build.com Name: WebstaurantStore Description: Commercial and residential plumbing supply with good availability on American Standard stainless steel sinks. Url: https://www.webstaurantstore.com Name: American Standard Description: Direct manufacturer source with complete Avery workstation line and comprehensive installation documentation and support. Url: https://www.americanstandard-us.com Name: Frank Webb Home Description: Professional plumbing distributor with showrooms and fabricator-focused services. Good for technical consultation. Url: https://frankwebb.com Fabricator Tip: Undermount workstation sinks are premium products that justify premium fabrication pricing. Ensure your customer understands that the exposed edge requires additional polishing and finishing work. Verify sink availability before templating - workstation models can have longer lead times than standard sinks.