Moen Weymouth Bridge
Moen Weymouth Bridge
Description
The Moen Weymouth bridge faucet template delivers precise hole positioning for this traditional-style kitchen faucet with modern pulldown functionality. Featuring a two-hole configuration at 8-inch centers, this template accommodates the Weymouth's distinctive bridge design that connects handles to the spout body above the deck. This DXF template is engineered for professional countertop fabricators working with granite, quartz, marble, and solid surface materials. The Weymouth S73204 series combines classic styling with contemporary features including a pulldown spray, Power Boost technology, and the Duralock quick-connect installation system, making accurate hole placement essential for proper functionality.
Dimensions
Specifications
- Manufacturer
- moen
- Downloads
- 0
Related Templates
Answer summary
What is the Moen Weymouth Bridge DXF template for?
Moen Weymouth Bridge is a faucet & fixture holes DXF template for countertop fabrication. Use it only after matching the manufacturer, model, dimensions, variant, and shop workflow to the actual job.
Risk check: Similar-looking products can use different cutout geometry. Confirm the official spec, shop tolerance, material behavior, and CNC output before production.
Next step: Run a DXF check, compare related templates, and keep the current manufacturer spec with the job packet.
Template decision guide
Should you use the Moen Weymouth Bridge DXF template?
Use the template page to shortlist a production file, then verify the exact model, variant, and machine workflow before cutting.
Best fit
Moen Weymouth Bridge is most useful when the product, manufacturer, model, install type, and variant match the job you are fabricating.
What to compare
Compare model number, dimensions, reveal or overhang, bowl or appliance geometry, material thickness, and CNC output requirements.
Risk check
Do not use a similar-looking template as a final production file. Small changes in flange, radius, trim, or reveal can cause a failed cutout.
Evidence to verify
Check the current manufacturer spec, field measurement, template preview, DXF layers, and a shop-approved tolerance before production.
Page-specific notes
Page-specific notes for Moen Weymouth Bridge
These notes are assembled from this exact template record, its category, available variants, and nearby template comparisons. They are meant to make the page more useful than a generic download page.
Exact record SlabWise is using
moen is filed under Faucet & Fixture Holes. The normalized record lists no normalized dimensions are listed in the template record, so the safest use is as a production starting point that still gets checked against the current job packet.
Variant choice
This record is shown as a single template variant. Treat that as a reason to verify reveal, overhang, and cutout assumptions before the file reaches production.
Category-specific production check
Faucet & Fixture Holes files should be checked for fit against material thickness, edge treatment, sink or appliance clearance, CNC layer expectations, and the shop's preferred tolerance before cutting customer material.
Closest comparisons
Before choosing this file, compare it with Moen 4in Centerset, Moen Adler Centerset, Moen Align Single Handle to catch small model, radius, flange, or layout differences that can change the final cut.
Evidence already attached
This page has extra enrichment for installation overview, CNC cutting notes, material compatibility, buying context. Use those notes as decision support, then keep the official product spec with the job.
The Moen Weymouth bridge faucet template delivers precise hole positioning for this traditional-style kitchen faucet with modern pulldown functionality. Featuring a two-hole configuration at 8-inch centers, this template accommodates the Weymouth's distinctive bridge design that connects handles to the spout body above the deck. This DXF template is engineered for professional countertop fabricators working with granite, quartz, marble, and solid surface materials. The Weymouth S73204 series combines classic styling with contemporary features including a pulldown spray, Power Boost technology, and the Duralock quick-connect installation system, making accurate hole placement essential for proper functionality.
Installation Overview
The Moen Weymouth bridge faucet requires two holes drilled at 8-inch centers through the countertop surface. Unlike widespread faucets, the bridge design mounts the main faucet body above the deck with only the handle connections requiring deck penetration. Standard hole diameter is 1.5 inches for the kitchen model, though this template shows 1.375 inches which may represent a bathroom variant. Fabricators should verify the specific model number (S73204 for kitchen) with the installer before cutting. The faucet body sits on the deck surface between the two holes, requiring a flat, level surface for proper seating. Maximum deck thickness for the Weymouth bridge is typically 1.5 inches, accommodating standard 2cm and 3cm slabs. The pulldown spray hose routes through the deck and requires clearance below for proper operation. Ensure adequate space beneath the countertop for the spray hose and supply line connections.
CNC Cutting Notes
This template is designed for CNC router and waterjet cutting applications. For kitchen bridge faucets, verify the correct hole size with your plumber - the specification sheet indicates 1.5-inch diameter holes for the S73204 model, while this template uses 0.6875-inch radius (1.375-inch diameter). Adjust the hole_radius parameter if working with the kitchen model versus bathroom variants. The hole_positions array places holes at [-4, 0] and [4, 0], creating the standard 8-inch spacing measured center-to-center. When using CNC routers on natural stone, employ diamond core bits rated for the specific material hardness. Feed rates should be modulated to prevent chipping, especially with brittle materials like granite. For engineered quartz, maintain consistent speeds to avoid resin burning around hole edges. Waterjet cutting provides optimal results across all materials with minimal edge stress. The symmetrical two-hole pattern simplifies programming and allows for easy mirroring if template orientation needs adjustment. Always mark the front edge of the countertop on your DXF layer to maintain proper orientation during cutting.
Material Compatibility
This bridge faucet template is compatible with all standard kitchen countertop materials including granite, marble, quartzite, engineered quartz, solid surface, quartzite, and ultra-compact surfaces. Natural stone materials like granite and marble require diamond core drilling to achieve clean penetrations without surface fracturing. Exotic stones with heavy veining or mineral inclusions should be evaluated before drilling to avoid weak points around holes. Engineered quartz brands including Caesarstone, Cambria, Silestone, and Hanstone cut cleanly with this pattern, though fabricators should monitor for heat buildup during drilling that can discolor the resin matrix. Solid surface materials like Corian, Hi-Macs, and Staron drill easily and allow for on-site modifications if needed. Ultra-compact surfaces including Dekton, Neolith, and Lapitec require specialized tooling due to extreme hardness - waterjet cutting is strongly recommended for these materials. When working with leathered or textured finishes, ensure the faucet deck area is honed flat to provide proper seating for the bridge body.
Where to Buy
The Moen Weymouth bridge kitchen faucet (model S73204) is widely available through professional and retail channels. Plumbing wholesalers including Ferguson, HD Supply, Hajoca, and local distributors stock this model and offer contractor pricing for fabrication professionals. Major home improvement retailers including The Home Depot and Lowe's carry the Weymouth series in multiple finishes including chrome, spot resist stainless, matte black, and brushed gold. Online retailers such as Amazon, Build.com, FaucetDirect.com, and PlumbersStock.com offer competitive pricing with detailed specifications and installation support. The S73204 model is a complete faucet with included deck plate, pulldown spray, and installation hardware. Popular finishes include chrome (S73204), brushed gold (S73204BG), matte black (S73204BL), and spot resist stainless (S73204SRS). When coordinating with clients, confirm the finish selection early in the fabrication process to ensure accurate lead times.