Moen Arbor MotionSense
Description
The Moen Arbor MotionSense faucet brings cutting-edge touchless technology to modern kitchens, featuring Wave sensor activation that responds to hand gestures for ultimate convenience and hygiene. For countertop fabricators, installing this advanced faucet system requires precision hole cutting to accommodate both the faucet body and the essential under-deck electronics. This DXF template provides manufacturer-verified specifications for the Moen Arbor MotionSense 7594E series, ensuring proper fitment of the pulldown spout, sensor housing, and electrical connections. The single-hole design simplifies installation while the MotionSense technology adds complexity to the under-deck space requirements, making accurate hole placement and sizing critical for successful installations.
Dimensions
Specifications
- Manufacturer
- moen
- Downloads
- 0
Related Templates
The Moen Arbor MotionSense faucet brings cutting-edge touchless technology to modern kitchens, featuring Wave sensor activation that responds to hand gestures for ultimate convenience and hygiene. For countertop fabricators, installing this advanced faucet system requires precision hole cutting to accommodate both the faucet body and the essential under-deck electronics. This DXF template provides manufacturer-verified specifications for the Moen Arbor MotionSense 7594E series, ensuring proper fitment of the pulldown spout, sensor housing, and electrical connections. The single-hole design simplifies installation while the MotionSense technology adds complexity to the under-deck space requirements, making accurate hole placement and sizing critical for successful installations.
Installation Overview
The Moen Arbor MotionSense requires a single precision-cut hole with a 1.5-inch minimum diameter (38mm) as specified by Moen. While the template provides a 0.6875-inch radius (1.375-inch diameter), fabricators should size up to 1.5 inches to meet manufacturer specifications and allow proper installation of the Wave sensor housing. The faucet installs through the deck with an escutcheon plate measuring 7-7/8 inches wide by 2-3/4 inches tall, which conceals the mounting hole. Maximum deck thickness is 2.5 inches (63mm). Critical to this installation is ensuring adequate under-deck clearance for the battery pack or AC adapter (depending on power configuration selected), control box, and sensor wiring. Minimum under-deck clearance of 12 inches is recommended. The Wave sensor extends 6.5 inches (165mm) in front of the faucet with a 5.5-inch height, requiring careful positioning to avoid interference with sink rims or backsplashes. When working with natural stone, use diamond core bits with water cooling to achieve clean holes without micro-fracturing around the perimeter.
CNC Cutting Notes
Programming CNC equipment for the Moen Arbor MotionSense installation requires careful attention to hole diameter specifications. Import the DXF template with hole center at coordinate (0,0) and program for a 1.5-inch diameter finished hole to meet Moen's requirements. For granite and quartzite, use a 4-stage cutting process: center pilot hole (0.25" bit), intermediate roughing pass at 1.375" diameter, semi-finish pass at 1.45" diameter, and final polishing pass at 1.5" diameter. This staged approach minimizes stress on the material and reduces chip-out risk. Spindle speeds should be 10,000-12,000 RPM for natural stone with feed rates of 50-70 IPM depending on material density and quartz content. For engineered quartz surfaces, reduce spindle speed to 9,000-10,000 RPM to prevent resin scorching while maintaining feed rates around 60 IPM. Tool path should always originate from the finished surface to ensure the cleanest edge where visible. Consider programming a 0.040-inch chamfer at 45 degrees on the top edge to facilitate faucet insertion and protect against edge damage. For shops with multiple Moen MotionSense installations, create a dedicated tool library entry with these optimized parameters to ensure consistency across jobs.
Material Compatibility
This template is engineered for compatibility with all standard countertop materials including granite, marble, quartzite, soapstone, engineered quartz (Caesarstone, Silestone, Cambria, Hanstone), solid surface (Corian, Hi-Macs, Staron), laminate, and ultra-compact surfaces (Dekton, Neolith). The single-hole design minimizes structural concerns, though the requirement for under-deck electronics clearance makes this faucet unsuitable for very thin profile installations or applications with limited under-deck access. For granite and natural stone materials, position the hole to avoid natural fissures, crystalline pockets, or dramatic veining that could compromise structural integrity or aesthetics. Engineered quartz provides the most consistent cutting experience with its uniform composition. When working with exotic granites containing high quartz content (like Azul Aran or Blue Bahia), expect increased tool wear and potential for micro-chipping; use fresh diamond tooling and reduce feed rates by 20-30%. Solid surface materials are forgiving and allow slight hole enlargement post-installation if needed. The MotionSense's electronic components are sensitive to moisture, making proper sealing especially critical with laminate countertops where exposed substrate must be thoroughly sealed. Ultra-compact surfaces require specialized diamond core bits but offer exceptional durability for high-use commercial installations.
Where to Buy
The Moen Arbor MotionSense faucet is available through professional plumbing distributors including Ferguson Enterprises, HD Supply, APR Supply, and local plumbing wholesalers serving the countertop fabrication industry. Many of these suppliers offer contractor pricing programs for fabrication shops with established accounts. Retail availability includes major home improvement chains such as The Home Depot and Lowe's, though selection may be limited to popular finishes. Online purchasing options include Amazon, Build.com, FaucetDirect.com, and the official Moen store at shop.moen.com. The Arbor MotionSense 7594E series is available in multiple finish options: Chrome (7594EWC), Spot Resist Stainless (7594EWSRS), and Matte Black (7594EWBL). Pricing typically ranges from $380-$580 depending on finish and retailer, making this a premium faucet option. The MotionSense Wave technology includes either battery power (4 AA batteries, typically lasting 1-2 years) or optional AC adapter (sold separately, model number 5923). When specifying for clients, confirm power preference and include the appropriate adapter in the quote if AC power is desired. Professional fabricators should recommend purchasing through authorized Moen dealers to ensure authentic products with full manufacturer warranty and access to technical support for troubleshooting sensor installation issues.