Dacor 36 Modernist Induction Cooktop
Dacor 36 Modernist Induction Cooktop
Description
The Dacor DTI36M977BB represents the pinnacle of modern induction cooking technology, featuring a sleek 36-inch frameless design with LCD touch controls and WiFi connectivity. For countertop fabricators, achieving a precise cutout is critical to ensure proper fit, ventilation, and long-term performance. This professional-grade template provides exact specifications for cutting granite, quartz, marble, or solid surface countertops to accommodate this premium Dacor Modernist induction cooktop.
Dimensions
- Overall Width
- 36"
- Overall Depth
- 21.25"
- Corner Radius
- 0.5"
Specifications
- Manufacturer
- Dacor
- Model Number
- DTI36M977BB
- Downloads
- 0
Related Templates
Dacor 30 Modernist Induction Cooktop
Dacor
Dacor 30 Modernist Gas Cooktop
Dacor
Dacor 36 Modernist Gas Cooktop
Dacor
Dacor 30 Modernist Electric Cooktop
Dacor
Answer summary
What is the Dacor 36 Modernist Induction Cooktop DXF template for?
Dacor 36 Modernist Induction Cooktop is a cooktop & range cutouts DXF template for countertop fabrication. Use it only after matching the manufacturer, model, dimensions, variant, and shop workflow to the actual job.
Risk check: Similar-looking products can use different cutout geometry. Confirm the official spec, shop tolerance, material behavior, and CNC output before production.
Next step: Run a DXF check, compare related templates, and keep the current manufacturer spec with the job packet.
Template decision guide
Should you use the Dacor 36 Modernist Induction Cooktop DXF template?
Use the template page to shortlist a production file, then verify the exact model, variant, and machine workflow before cutting.
Best fit
Dacor 36 Modernist Induction Cooktop is most useful when the product, manufacturer, model, install type, and variant match the job you are fabricating.
What to compare
Compare model number, dimensions, reveal or overhang, bowl or appliance geometry, material thickness, and CNC output requirements.
Risk check
Do not use a similar-looking template as a final production file. Small changes in flange, radius, trim, or reveal can cause a failed cutout.
Evidence to verify
Check the current manufacturer spec, field measurement, template preview, DXF layers, and a shop-approved tolerance before production.
Page-specific notes
Page-specific notes for Dacor 36 Modernist Induction Cooktop
These notes are assembled from this exact template record, its category, available variants, and nearby template comparisons. They are meant to make the page more useful than a generic download page.
Exact record SlabWise is using
Dacor DTI36M977BB is filed under Cooktop & Range Cutouts. The normalized record lists width 36", depth 21.25", corner radius 0.5", so the safest use is as a production starting point that still gets checked against the current job packet.
Variant choice
This record is shown as a single template variant. Treat that as a reason to verify reveal, overhang, and cutout assumptions before the file reaches production.
Category-specific production check
Cooktop & Range Cutouts files should be checked for fit against material thickness, edge treatment, sink or appliance clearance, CNC layer expectations, and the shop's preferred tolerance before cutting customer material.
Closest comparisons
Before choosing this file, compare it with Dacor 30 Modernist Induction Cooktop, Dacor 30 Modernist Gas Cooktop, Dacor 36 Modernist Gas Cooktop to catch small model, radius, flange, or layout differences that can change the final cut.
Evidence already attached
This page has extra enrichment for installation overview, CNC cutting notes, material compatibility, buying context. Use those notes as decision support, then keep the official product spec with the job.
The Dacor DTI36M977BB represents the pinnacle of modern induction cooking technology, featuring a sleek 36-inch frameless design with LCD touch controls and WiFi connectivity. For countertop fabricators, achieving a precise cutout is critical to ensure proper fit, ventilation, and long-term performance. This professional-grade template provides exact specifications for cutting granite, quartz, marble, or solid surface countertops to accommodate this premium Dacor Modernist induction cooktop.
Installation Overview
The Dacor DTI36M977BB requires a countertop cutout measuring 33.75 inches wide by 19.0 inches deep with 0.5-inch corner radius for optimal installation. The overall unit dimensions are 36 inches wide by 21.25 inches deep, providing minimal overlap for a contemporary flush appearance. The cutout must be positioned with at least 1-1/8 inch clearance from the rear wall to allow proper ventilation and electrical connections. When fabricating natural stone or engineered surfaces, ensure the substrate provides adequate support around the perimeter, as the cooktop weight is distributed along the edges. The 5-zone induction system generates minimal heat transfer to surrounding materials compared to gas or traditional electric cooktops, but proper clearances remain essential for safe installation and warranty compliance.
CNC Cutting Notes
This DXF template is optimized for CNC router fabrication with tool path compensation built into the file geometry. For granite and quartz fabrication, use a 20mm router bit with wet cutting to minimize thermal stress and edge chipping. Program your CNC to cut the 0.5-inch corner radius using a smooth arc interpolation rather than segmented lines for a professional finish. When cutting natural stone materials, make multiple shallow passes rather than a single deep cut to reduce vibration and prevent microcracking along the cutout edges. For porcelain slabs, reduce feed rate by 30% and increase coolant flow to manage the extreme hardness. Always perform a dry-fit with the actual cooktop unit before final installation, as manufacturing tolerances may vary slightly between production runs. The template includes alignment marks for centering the cutout relative to cabinet openings and ensuring parallel alignment with the countertop front edge.
Material Compatibility
This cutout template is compatible with all common countertop materials including granite, quartz, quartzite, marble, soapstone, solid surface (Corian), and ultra-compact surfaces (Dekton, Neolith). For granite and natural stone, the cutout edges should be polished to 400-grit minimum to prevent moisture absorption and staining over time. Quartz and engineered surfaces benefit from a sealed edge treatment using manufacturer-approved epoxy to prevent delamination from heat cycling. When working with marble or softer natural stones, consider adding a reinforcing sub-frame around the cutout perimeter to prevent sagging or cracking under the cooktop weight. Solid surface materials require a support structure with maximum 12-inch spacing between supports. The minimal heat signature of induction cooking makes this cooktop an excellent choice for heat-sensitive materials like recycled glass composites or concrete countertops.
Where to Buy
The Dacor DTI36M977BB Modernist 36-inch induction cooktop is available through authorized appliance retailers including AJ Madison, Ferguson, Best Buy, Abt Electronics, and local Dacor dealers. Pricing typically ranges from $3,200 to $4,500 depending on promotions and installation packages. For fabricators coordinating installations, verify the specific model number with your client as Dacor offers several 36-inch induction variants with different cutout requirements. Always request the installation manual from the retailer to confirm cutout dimensions before cutting expensive countertop materials.