Dacor 30 Modernist Electric Cooktop
Dacor 30 Modernist Electric Cooktop
Description
This template represents the Dacor DTR30M975FS, a 30-inch electric cooktop with 4 burners. IMPORTANT NOTICE: This model number could not be verified through Dacor's current product catalog, authorized retailers, or manufacturer specifications. The dimensions provided (28.375" x 19.875" cutout) are approximated based on similar Dacor 30-inch platforms and should be considered preliminary. Fabricators must independently verify all measurements with the actual appliance or official installation documentation before cutting any countertop materials.
Dimensions
- Overall Width
- 30"
- Overall Depth
- 21"
- Corner Radius
- 0.5"
Specifications
- Manufacturer
- Dacor
- Model Number
- DTR30M975FS
- Downloads
- 0
Related Templates
Dacor 36 Modernist Electric Cooktop
Dacor
Dacor 30 Modernist Gas Cooktop
Dacor
Dacor 36 Modernist Gas Cooktop
Dacor
Dacor 30 Modernist Induction Cooktop
Dacor
Answer summary
What is the Dacor 30 Modernist Electric Cooktop DXF template for?
Dacor 30 Modernist Electric Cooktop is a cooktop & range cutouts DXF template for countertop fabrication. Use it only after matching the manufacturer, model, dimensions, variant, and shop workflow to the actual job.
Risk check: Similar-looking products can use different cutout geometry. Confirm the official spec, shop tolerance, material behavior, and CNC output before production.
Next step: Run a DXF check, compare related templates, and keep the current manufacturer spec with the job packet.
Template decision guide
Should you use the Dacor 30 Modernist Electric Cooktop DXF template?
Use the template page to shortlist a production file, then verify the exact model, variant, and machine workflow before cutting.
Best fit
Dacor 30 Modernist Electric Cooktop is most useful when the product, manufacturer, model, install type, and variant match the job you are fabricating.
What to compare
Compare model number, dimensions, reveal or overhang, bowl or appliance geometry, material thickness, and CNC output requirements.
Risk check
Do not use a similar-looking template as a final production file. Small changes in flange, radius, trim, or reveal can cause a failed cutout.
Evidence to verify
Check the current manufacturer spec, field measurement, template preview, DXF layers, and a shop-approved tolerance before production.
Page-specific notes
Page-specific notes for Dacor 30 Modernist Electric Cooktop
These notes are assembled from this exact template record, its category, available variants, and nearby template comparisons. They are meant to make the page more useful than a generic download page.
Exact record SlabWise is using
Dacor DTR30M975FS is filed under Cooktop & Range Cutouts. The normalized record lists width 30", depth 21", corner radius 0.5", so the safest use is as a production starting point that still gets checked against the current job packet.
Variant choice
This record is shown as a single template variant. Treat that as a reason to verify reveal, overhang, and cutout assumptions before the file reaches production.
Category-specific production check
Cooktop & Range Cutouts files should be checked for fit against material thickness, edge treatment, sink or appliance clearance, CNC layer expectations, and the shop's preferred tolerance before cutting customer material.
Closest comparisons
Before choosing this file, compare it with Dacor 36 Modernist Electric Cooktop, Dacor 30 Modernist Gas Cooktop, Dacor 36 Modernist Gas Cooktop to catch small model, radius, flange, or layout differences that can change the final cut.
Evidence already attached
This page has extra enrichment for installation overview, CNC cutting notes, material compatibility, buying context. Use those notes as decision support, then keep the official product spec with the job.
This template represents the Dacor DTR30M975FS, a 30-inch electric cooktop with 4 burners. IMPORTANT NOTICE: This model number could not be verified through Dacor's current product catalog, authorized retailers, or manufacturer specifications. The dimensions provided (28.375" x 19.875" cutout) are approximated based on similar Dacor 30-inch platforms and should be considered preliminary. Fabricators must independently verify all measurements with the actual appliance or official installation documentation before cutting any countertop materials.
Installation Overview
The template specifies a cutout of 28.375 inches wide by 19.875 inches deep with a 0.5-inch corner radius, based on standard Dacor 30-inch cooktop configurations. However, without verified manufacturer specifications, these dimensions carry significant risk. Before proceeding with fabrication, obtain the actual cooktop unit and perform physical measurements, or contact Dacor customer support at 833-353-5483 to verify if this model exists and obtain official installation documentation. If this is a custom order, special production unit, or international variant, request certified drawings from the supplier. Never cut expensive countertop materials based on unverified templates, as incorrect dimensions can result in costly material waste and installation failures.
CNC Cutting Notes
If you choose to use this template despite the unverified status, implement additional safety measures during fabrication. Create a test cut in an inexpensive material first to verify fitment with the actual appliance unit. Build in an extra 1/8 inch of clearance around the perimeter that can be filled with trim pieces if the dimensions prove accurate, or provide room for adjustment if discrepancies are discovered. Never cut the final countertop material without the actual cooktop on-site for dry fitting. Document all measurements with photographs and written verification from the client that they accept responsibility for dimension accuracy. Consider using a templating system that allows for on-site verification before committing to the final cut.
Material Compatibility
Standard material compatibility applies if dimensions are verified: granite, quartz, quartzite, marble, solid surface, and ultra-compact surfaces. However, the unverified status of this model makes it inappropriate for high-value installations without absolute dimensional confirmation. Consider recommending that clients verify the model number or select a confirmed alternative Dacor model with published specifications before proceeding with expensive slab fabrication.
Where to Buy
The Dacor DTR30M975FS could not be located through standard appliance retailers including AJ Madison, Ferguson, Best Buy, or Abt Electronics. If a client claims to have ordered this model, request proof of purchase and contact information for the supplier. Verify the model number on the appliance data plate. This may be a discontinued model, in which case Dacor customer support can identify suitable replacement models with verified cutout specifications.