Delta RP100734 Soap Dispenser Modern
Delta RP100734 Soap Dispenser Modern
Description
The Delta RP100734 Trinsic Metal Soap Dispenser elevates kitchen design with its distinctive angular geometry and premium metal construction. Part of Delta's award-winning Trinsic collection, this 13-ounce capacity dispenser features a solid metal pump head that coordinates seamlessly with Trinsic faucets and other contemporary kitchen fixtures. The larger capacity means fewer refills, while the durable metal construction ensures years of reliable service in high-end residential and light commercial installations. Professional fabricators choose the RP100734 for luxury remodels and new construction where design cohesion matters. Our precision drilling template ensures flawless installation that meets Delta's exacting quality standards for modern kitchen environments.
Dimensions
Specifications
- Manufacturer
- Delta
- Model Number
- RP100734
- Downloads
- 0
Related Templates
Answer summary
What is the Delta RP100734 Soap Dispenser Modern DXF template for?
Delta RP100734 Soap Dispenser Modern is a appliance cutouts DXF template for countertop fabrication. Use it only after matching the manufacturer, model, dimensions, variant, and shop workflow to the actual job.
Risk check: Similar-looking products can use different cutout geometry. Confirm the official spec, shop tolerance, material behavior, and CNC output before production.
Next step: Run a DXF check, compare related templates, and keep the current manufacturer spec with the job packet.
Template decision guide
Should you use the Delta RP100734 Soap Dispenser Modern DXF template?
Use the template page to shortlist a production file, then verify the exact model, variant, and machine workflow before cutting.
Best fit
Delta RP100734 Soap Dispenser Modern is most useful when the product, manufacturer, model, install type, and variant match the job you are fabricating.
What to compare
Compare model number, dimensions, reveal or overhang, bowl or appliance geometry, material thickness, and CNC output requirements.
Risk check
Do not use a similar-looking template as a final production file. Small changes in flange, radius, trim, or reveal can cause a failed cutout.
Evidence to verify
Check the current manufacturer spec, field measurement, template preview, DXF layers, and a shop-approved tolerance before production.
Page-specific notes
Page-specific notes for Delta RP100734 Soap Dispenser Modern
These notes are assembled from this exact template record, its category, available variants, and nearby template comparisons. They are meant to make the page more useful than a generic download page.
Exact record SlabWise is using
Delta RP100734 is filed under Appliance Cutouts. The normalized record lists no normalized dimensions are listed in the template record, so the safest use is as a production starting point that still gets checked against the current job packet.
Variant choice
This record is shown as a single template variant. Treat that as a reason to verify reveal, overhang, and cutout assumptions before the file reaches production.
Category-specific production check
Appliance Cutouts files should be checked for fit against material thickness, edge treatment, sink or appliance clearance, CNC layer expectations, and the shop's preferred tolerance before cutting customer material.
Closest comparisons
Before choosing this file, compare it with Delta RP1001 Soap Dispenser, Blanco 442047 Soap Dispenser Artona, Blanco 442681 Soap Dispenser Lato to catch small model, radius, flange, or layout differences that can change the final cut.
Evidence already attached
This page has extra enrichment for installation overview, CNC cutting notes, material compatibility, buying context. Use those notes as decision support, then keep the official product spec with the job.
The Delta RP100734 Trinsic Metal Soap Dispenser elevates kitchen design with its distinctive angular geometry and premium metal construction. Part of Delta's award-winning Trinsic collection, this 13-ounce capacity dispenser features a solid metal pump head that coordinates seamlessly with Trinsic faucets and other contemporary kitchen fixtures. The larger capacity means fewer refills, while the durable metal construction ensures years of reliable service in high-end residential and light commercial installations. Professional fabricators choose the RP100734 for luxury remodels and new construction where design cohesion matters. Our precision drilling template ensures flawless installation that meets Delta's exacting quality standards for modern kitchen environments.
Installation Overview
Install the Delta RP100734 Trinsic dispenser using a precisely drilled 1-3/8" (1.375") diameter hole, with acceptable tolerance of +/- 1/8 inch. Position the hole to complement the angular aesthetic of Trinsic faucets - typically 3-5 inches from the faucet base for visual balance in contemporary designs. The dispenser accommodates deck thicknesses up to 3 inches, making it compatible with standard 3cm quartz installations and built-up edge details. The unit extends 3.5 inches below the deck surface, requiring minimum 6 inches of total clearance for the larger 13-ounce bottle and comfortable refilling. Use diamond core bits with continuous water cooling when drilling quartz or granite to prevent thermal cracking. The metal pump head requires careful handling during installation to avoid scratching premium finishes like Champagne Bronze or Matte Black. Mount with the included hardware tightened to finger-tight plus one quarter turn to ensure proper gasket compression without over-stressing the metal components.
CNC Cutting Notes
CNC fabrication of the RP100734 mounting hole follows standard soap dispenser protocols with 1-3/8" diameter drilling cycle. Program spindle speeds of 1000-1200 RPM for engineered quartz, 800-1000 RPM for natural granite, with feed rates of 3-5 IPM adjusted for material hardness. Use peck drilling strategy with 0.5" depth increments and full retraction to clear chips and prevent core bit loading. Through-spindle coolant at 0.5 GPM minimum is essential for thermal management and extended tool life. For high-end installations, program a subtle chamfer (0.125" x 45°) on the top edge to create a refined finished appearance and facilitate dispenser installation without scratching finishes. Verify hole perpendicularity using CNC machine calibration - holes more than 1.5° off vertical can cause aesthetic issues with the Trinsic's geometric design. On patterned materials, coordinate hole placement with vein orientation using digital templating to ensure the dispenser complements rather than interrupts visual flow.
Material Compatibility
The Delta RP100734 Trinsic dispenser excels in contemporary installations featuring engineered quartz, quartzite, and ultra-compact surfaces. Its modern design pairs especially well with popular quartz patterns like Calacatta, concrete-look, and solid colors in both 2cm and 3cm thicknesses. The 3-inch maximum deck thickness accommodation allows installation in 3cm quartz with laminated build-ups for waterfall edges. Natural stones including granite, marble, and quartzite are fully compatible - the metal pump head and premium finishes complement high-end stone selections. Solid surface materials work but may not suit the Trinsic's premium positioning. Ultra-compact surfaces like Dekton, Neolith, and Lapitec pair beautifully with the modern aesthetic. Not recommended for laminate or tile countertops. The metal construction makes this dispenser ideal for outdoor kitchen applications where plastic dispensers degrade from UV exposure - verify outdoor-rated finishes with Delta for exterior installations.
Where to Buy
Purchase the Delta RP100734 Trinsic Metal Soap Dispenser from premium kitchen and bath showrooms including Ferguson Bath, Kitchen & Lighting Gallery locations nationwide. This is a higher-end Delta product typically stocked at designer-focused retailers rather than big-box stores. Retail pricing ranges from $90-$140 depending on finish: Chrome (RP100734) is the base price, with Arctic Stainless (RP100734AR), Champagne Bronze (RP100734CZ), Matte Black (RP100734BL), and Black Stainless (RP100734KS) commanding premiums. Professional designers and contractors can establish accounts through Ferguson Pro for wholesale pricing and project support. Online availability includes Build.com, FaucetDirect.com, and QualityBath.com. For finish coordination with Trinsic faucets, consult Delta's finish matching guide or contact Delta customer service at 800-345-3358. Extended warranties and replacement parts available through Delta's support network.