Vigo VG-DI-3322 33x22 Drop-In Double 33" Double Equal Bowl Drop In Sink Cutout
Description
The Vigo VG-DI-3322 33x22 Drop-In Double 33" Double Equal Bowl Drop In Sink Cutout template delivers precision DXF geometry for professional stone fabrication. With dimensions of standard dimensions, this template provides CNC-ready profiles that ensure consistent, repeatable results. Designed for the sinks category, this template streamlines the fabrication process from initial programming through final finishing. Professional shops rely on accurate templates like this to minimize waste and maximize production efficiency across installations.
Dimensions
- Overall Width
- 33"
- Overall Depth
- 22"
- Bowl Width
- 31"
- Bowl Depth
- 20"
- Corner Radius
- 0.375"
Specifications
- Manufacturer
- Vigo
- Model Number
- VG-DI-3322
- Installation Type
- Drop In
- Bowl Configuration
- Double Equal
- Material
- Stainless-Steel
- Min. Cabinet Width
- 36"
- Downloads
- 0
Related Templates
Vigo VG-3218B 32x18 Matte Black 32" Single Bowl Undermount Sink Cutout
Vigo
Vigo VG-DI-2522 25x22 Drop-In Single 25" Single Bowl Drop In Sink Cutout
Vigo
Vigo VG-FM-3020 30x20 Farmhouse Stainless 30" Single Bowl Farmhouse Sink Cutout
Vigo
Vigo VG-FM-3320 33x20 Farmhouse Stainless 33" Single Bowl Farmhouse Sink Cutout
Vigo
The Vigo VG-DI-3322 33x22 Drop-In Double 33" Double Equal Bowl Drop In Sink Cutout template delivers precision DXF geometry for professional stone fabrication. With dimensions of standard dimensions, this template provides CNC-ready profiles that ensure consistent, repeatable results. Designed for the sinks category, this template streamlines the fabrication process from initial programming through final finishing. Professional shops rely on accurate templates like this to minimize waste and maximize production efficiency across installations.
Installation Overview
Installing the Vigo VG-DI-3322 33x22 Drop-In Double 33" Double Equal Bowl Drop In Sink Cutout template requires standard stone fabrication procedures adapted for the sinks category. Begin with accurate field measurements to verify the template dimensions match the installation site. Import the DXF file into CNC programming software and create an optimized cutting plan that minimizes material waste. For the cutting phase, select appropriate diamond tooling based on the stone type being fabricated. Maintain consistent coolant flow during all CNC operations to prevent thermal damage. After cutting, perform edge finishing according to the template specifications. Dry-fit all pieces at the installation site before applying adhesive. Use construction-grade silicone or epoxy appropriate for stone installations. Ensure proper support for all sections, adding brackets where overhangs exceed manufacturer recommendations. Apply a penetrating sealer after installation to protect the finished surface. Final inspection should verify all dimensions match the template within acceptable tolerances.
CNC Cutting Notes
CNC programming for the Vigo VG-DI-3322 33x22 Drop-In Double 33" Double Equal Bowl Drop In Sink Cutout should account for tool wear compensation, especially on abrasive marble stones. Recommended parameters: spindle speed 4500-6500 RPM, feed rate 35-55 IPM for roughing. The vigo geometry benefits from a two-pass strategy — rough to within 2mm of final profile, then finish at reduced feed rate (15-25 IPM). Use plunge rates no faster than 10 IPM to prevent tool breakage. Monitor vibration levels during cutting; excessive chatter indicates tool wear or incorrect speed/feed settings. Keep backup tooling on hand for production runs exceeding 50 linear feet of edge profile.
Material Compatibility
The Vigo VG-DI-3322 33x22 Drop-In Double 33" Double Equal Bowl Drop In Sink Cutout profile pairs best with medium-to-hard natural stones and engineered materials. Granite is the ideal substrate, offering the hardness needed to maintain the vigo geometry while accepting a brilliant polish. Quartz composites provide consistent results with minimal tool wear variation. For softer stones like marble or limestone, the profile remains achievable but requires adjusted CNC parameters and additional care during finishing. Exotic stones such as quartzite and super-white dolomite produce stunning results with this profile. Sintered stone panels are compatible when using specialized thin-material tooling. Always perform a test cut on representative material before beginning production runs.
Where to Buy
Professional fabricators can source marble slabs from local stone distributors and wholesale suppliers. Visit SlabWise for template downloads and fabrication resources.