Transolid DISS-2522 Drop-In 25x22 Single 25" Single Bowl Drop In Sink Cutout
Description
Professional fabricators turn to the Transolid DISS-2522 Drop-In 25x22 Single 25" Single Bowl Drop In Sink Cutout template for accurate sinks production work. The standard dimensions specifications provide the exact geometry needed for CNC-based fabrication workflows. This DXF template eliminates manual layout work while ensuring every piece meets the tight tolerances required for quality installations. The design works well across multiple stone types and installation scenarios.
Dimensions
- Overall Width
- 25"
- Overall Depth
- 22"
- Bowl Width
- 23"
- Bowl Depth
- 20"
- Corner Radius
- 0.375"
Specifications
- Manufacturer
- Transolid
- Model Number
- DISS-2522
- Installation Type
- Drop In
- Bowl Configuration
- Single
- Material
- Stainless-Steel
- Min. Cabinet Width
- 30"
- Downloads
- 0
Related Templates
Transolid DISS-3322 Drop-In 33x22 Double 33" Double Equal Bowl Drop In Sink Cutout
Transolid
Transolid FTSS-3020 Farmhouse 30x20 Stainless 30" Single Bowl Farmhouse Sink Cutout
Transolid
Transolid FTSS-3320 Farmhouse 33x20 Stainless 33" Single Bowl Farmhouse Sink Cutout
Transolid
Transolid GUDS-3322 Granite Undermount 33x22 Double 33" Double Equal Bowl Undermount Sink Cutout
Transolid
Professional fabricators turn to the Transolid DISS-2522 Drop-In 25x22 Single 25" Single Bowl Drop In Sink Cutout template for accurate sinks production work. The standard dimensions specifications provide the exact geometry needed for CNC-based fabrication workflows. This DXF template eliminates manual layout work while ensuring every piece meets the tight tolerances required for quality installations. The design works well across multiple stone types and installation scenarios.
Installation Overview
Installing the Transolid DISS-2522 Drop-In 25x22 Single 25" Single Bowl Drop In Sink Cutout template requires standard stone fabrication procedures adapted for the sinks category. Begin with accurate field measurements to verify the template dimensions match the installation site. Import the DXF file into CNC programming software and create an optimized cutting plan that minimizes material waste. For the cutting phase, select appropriate diamond tooling based on the stone type being fabricated. Maintain consistent coolant flow during all CNC operations to prevent thermal damage. After cutting, perform edge finishing according to the template specifications. Dry-fit all pieces at the installation site before applying adhesive. Use construction-grade silicone or epoxy appropriate for stone installations. Ensure proper support for all sections, adding brackets where overhangs exceed manufacturer recommendations. Apply a penetrating sealer after installation to protect the finished surface. Final inspection should verify all dimensions match the template within acceptable tolerances.
CNC Cutting Notes
CNC programming for the Transolid DISS-2522 Drop-In 25x22 Single 25" Single Bowl Drop In Sink Cutout should account for tool wear compensation, especially on abrasive natural stone stones. Recommended parameters: spindle speed 4500-6500 RPM, feed rate 35-55 IPM for roughing. The transolid geometry benefits from a two-pass strategy — rough to within 2mm of final profile, then finish at reduced feed rate (15-25 IPM). Use plunge rates no faster than 10 IPM to prevent tool breakage. Monitor vibration levels during cutting; excessive chatter indicates tool wear or incorrect speed/feed settings. Keep backup tooling on hand for production runs exceeding 50 linear feet of edge profile.
Material Compatibility
The Transolid DISS-2522 Drop-In 25x22 Single 25" Single Bowl Drop In Sink Cutout profile pairs best with medium-to-hard natural stones and engineered materials. Granite is the ideal substrate, offering the hardness needed to maintain the transolid geometry while accepting a brilliant polish. Quartz composites provide consistent results with minimal tool wear variation. For softer stones like marble or limestone, the profile remains achievable but requires adjusted CNC parameters and additional care during finishing. Exotic stones such as quartzite and super-white dolomite produce stunning results with this profile. Sintered stone panels are compatible when using specialized thin-material tooling. Always perform a test cut on representative material before beginning production runs.
Where to Buy
Professional fabricators can source natural stone slabs from local stone distributors and wholesale suppliers. Visit SlabWise for template downloads and fabrication resources.