Sinkology SK202-30GR Renoir 30 Granite Undermount 30" Single Bowl Undermount Sink Cutout
Description
The Sinkology SK202-30GR Renoir 30 Granite Undermount 30" Single Bowl Undermount Sink Cutout template delivers precision DXF geometry for professional stone fabrication. With dimensions of standard dimensions, this template provides CNC-ready profiles that ensure consistent, repeatable results. Designed for the sinks category, this template streamlines the fabrication process from initial programming through final finishing. Professional shops rely on accurate templates like this to minimize waste and maximize production efficiency across installations.
Dimensions
- Overall Width
- 30"
- Overall Depth
- 18"
- Bowl Width
- 28"
- Bowl Depth
- 16"
- Corner Radius
- 0.75"
Specifications
- Manufacturer
- Sinkology
- Model Number
- SK202-30GR
- Installation Type
- Undermount
- Bowl Configuration
- Single
- Material
- Granite-Composite
- Min. Cabinet Width
- 33"
- Downloads
- 0
Related Templates
Sinkology SK101-30AC Bradstreet II 30 Copper Farmhouse 30" Single Bowl Farmhouse Sink Cutout
Sinkology
Sinkology SK101-30FC Bradstreet 30 Fireclay Farmhouse 30" Single Bowl Farmhouse Sink Cutout
Sinkology
Sinkology SK101-33AC Bradstreet II 33 Copper Farmhouse 33" Single Bowl Farmhouse Sink Cutout
Sinkology
Sinkology SK202-33DGR Renoir 33 Granite Double 33" Double Equal Bowl Undermount Sink Cutout
Sinkology
The Sinkology SK202-30GR Renoir 30 Granite Undermount 30" Single Bowl Undermount Sink Cutout template delivers precision DXF geometry for professional stone fabrication. With dimensions of standard dimensions, this template provides CNC-ready profiles that ensure consistent, repeatable results. Designed for the sinks category, this template streamlines the fabrication process from initial programming through final finishing. Professional shops rely on accurate templates like this to minimize waste and maximize production efficiency across installations.
Installation Overview
Installing the Sinkology SK202-30GR Renoir 30 Granite Undermount 30" Single Bowl Undermount Sink Cutout template requires standard stone fabrication procedures adapted for the sinks category. Begin with accurate field measurements to verify the template dimensions match the installation site. Import the DXF file into CNC programming software and create an optimized cutting plan that minimizes material waste. For the cutting phase, select appropriate diamond tooling based on the stone type being fabricated. Maintain consistent coolant flow during all CNC operations to prevent thermal damage. After cutting, perform edge finishing according to the template specifications. Dry-fit all pieces at the installation site before applying adhesive. Use construction-grade silicone or epoxy appropriate for stone installations. Ensure proper support for all sections, adding brackets where overhangs exceed manufacturer recommendations. Apply a penetrating sealer after installation to protect the finished surface. Final inspection should verify all dimensions match the template within acceptable tolerances.
CNC Cutting Notes
For the Sinkology SK202-30GR Renoir 30 Granite Undermount 30" Single Bowl Undermount Sink Cutout profile, set your CNC router spindle speed between 5000-7000 RPM for granite substrates. Use a feed rate of 40-60 IPM for roughing passes and reduce to 20-30 IPM for finishing passes. Select a diamond-tipped profile bit matching the template radius specifications. Program the toolpath using climb milling for cleaner cuts on the sinkology geometry. Maintain coolant flow at 2+ GPM to prevent thermal fracturing. For harder stones like granite, reduce feed rates by 20% and increase water flow. Run a test cut on scrap material to verify the profile matches the DXF template before committing to production stock.
Material Compatibility
This sinkology profile is compatible with a wide range of countertop materials. Natural granite remains the most popular substrate, offering durability and an attractive polished finish. Engineered quartz performs excellently, with consistent material properties that make CNC cutting predictable and efficient. Marble requires more careful handling — reduce feed rates by 15-20% to prevent veining from causing unpredictable fractures. Quartzite is an excellent choice for this profile, as the material's hardness preserves fine geometric details through years of use. Dolomite and travertine can be profiled with adjusted parameters. Avoid ultra-thin porcelain slabs for complex profiles without proper backing support.
Where to Buy
Professional fabricators can source granite slabs from local stone distributors and wholesale suppliers. Visit SlabWise for template downloads and fabrication resources.