Ruvati RVM5307 32 Inch Undermount Kitchen Sink 3070 16 Gauge Stainless Cutout
Description
The Ruvati RVM5307 32 Inch Undermount Kitchen Sink 3070 16 Gauge Stainless Cutout is a production-ready DXF template engineered for sinks fabrication projects. At standard dimensions, this template addresses the specific requirements of professional stone fabrication with accurate CNC-ready geometry. Fabricators benefit from standardized dimensions that reduce setup time and improve consistency. This template represents proven configurations used daily in professional fabrication shops.
Dimensions
- Overall Width
- 31.5"
- Overall Depth
- 17.75"
- Bowl Width
- 18.5"
- Bowl Depth
- 15.75"
- Corner Radius
- 0.3937"
Specifications
- Manufacturer
- Ruvati
- Model Number
- RVM5307
- Installation Type
- Undermount
- Bowl Configuration
- Single
- Material
- Stainless-Steel
- Min. Cabinet Width
- 36"
- Downloads
- 0
Related Templates
Ruvati RVG1033 Valencia 33x22 Granite Double 33" Double Equal Bowl Undermount Sink Cutout
Ruvati
Ruvati RVG1080 Valencia 33x22 Granite Single 33" Single Bowl Undermount Sink Cutout
Ruvati
Ruvati RVG2030 Valencia 30x18 Granite Composite 30" Single Bowl Undermount Sink Cutout
Ruvati
Ruvati RVG2033 Valencia 33x22 Granite Undermount 33" Single Bowl Undermount Sink Cutout
Ruvati
The Ruvati RVM5307 32 Inch Undermount Kitchen Sink 3070 16 Gauge Stainless Cutout is a production-ready DXF template engineered for sinks fabrication projects. At standard dimensions, this template addresses the specific requirements of professional stone fabrication with accurate CNC-ready geometry. Fabricators benefit from standardized dimensions that reduce setup time and improve consistency. This template represents proven configurations used daily in professional fabrication shops.
Installation Overview
Installing the Ruvati RVM5307 32 Inch Undermount Kitchen Sink 3070 16 Gauge Stainless Cutout template requires standard stone fabrication procedures adapted for the sinks category. Begin with accurate field measurements to verify the template dimensions match the installation site. Import the DXF file into CNC programming software and create an optimized cutting plan that minimizes material waste. For the cutting phase, select appropriate diamond tooling based on the stone type being fabricated. Maintain consistent coolant flow during all CNC operations to prevent thermal damage. After cutting, perform edge finishing according to the template specifications. Dry-fit all pieces at the installation site before applying adhesive. Use construction-grade silicone or epoxy appropriate for stone installations. Ensure proper support for all sections, adding brackets where overhangs exceed manufacturer recommendations. Apply a penetrating sealer after installation to protect the finished surface. Final inspection should verify all dimensions match the template within acceptable tolerances.
CNC Cutting Notes
Optimal CNC settings for the Ruvati RVM5307 32 Inch Undermount Kitchen Sink 3070 16 Gauge Stainless Cutout template depend on the substrate material. For natural granite, use 4000-5500 RPM with 30-50 IPM feed. For quartz composites, increase to 5500-7000 RPM at 45-65 IPM. The ruvati profile requires careful attention to entry and exit points on the toolpath to prevent edge chipping. Program multiple depth passes rather than a single full-depth cut. Coolant temperature should remain below 70°F for optimal diamond tool performance. Dress profiling wheels after every 20-30 linear feet of cutting to maintain profile accuracy.
Material Compatibility
The Ruvati RVM5307 32 Inch Undermount Kitchen Sink 3070 16 Gauge Stainless Cutout template works exceptionally well with natural granite, providing clean edges that polish to a high gloss. Marble is also compatible, though the softer stone requires reduced feed rates during CNC operations to prevent micro-chipping. Quartzite offers excellent results with this profile, as the hard mineral structure holds fine details well. Engineered quartz composites are ideal substrates, offering consistent material properties that produce predictable results. Soapstone and slate can be profiled using this template with appropriate tooling adjustments. For limestone, use conservative CNC parameters due to the stone's tendency to chip on detailed profiles. Porcelain sintered stone panels require specialized diamond tooling but produce excellent results with the ruvati geometry.
Where to Buy
Professional fabricators can source engineered quartz slabs from local stone distributors and wholesale suppliers. Visit SlabWise for template downloads and fabrication resources.