Ruvati RVL2100 Fiamma 30 Fireclay Farmhouse 30" Single Bowl Farmhouse Sink Cutout
Description
The Ruvati RVL2100 Fiamma 30 Fireclay Farmhouse 30" Single Bowl Farmhouse Sink Cutout template delivers precision DXF geometry for professional stone fabrication. With dimensions of standard dimensions, this template provides CNC-ready profiles that ensure consistent, repeatable results. Designed for the sinks category, this template streamlines the fabrication process from initial programming through final finishing. Professional shops rely on accurate templates like this to minimize waste and maximize production efficiency across installations.
Dimensions
- Overall Width
- 30"
- Overall Depth
- 20"
- Bowl Width
- 28"
- Bowl Depth
- 18"
- Corner Radius
- 0.25"
Specifications
- Manufacturer
- Ruvati
- Model Number
- RVL2100
- Installation Type
- Farmhouse
- Bowl Configuration
- Single
- Material
- Fireclay
- Min. Cabinet Width
- 33"
- Downloads
- 0
Related Templates
Ruvati RVH9200 Gravena 30 Stainless Farmhouse 30" Single Bowl Farmhouse Sink Cutout
Ruvati
Ruvati RVH9300 Gravena 33 Stainless Farmhouse 33" Single Bowl Farmhouse Sink Cutout
Ruvati
Ruvati RVL2018 Fiamma 24 Fireclay Farmhouse 24" Single Bowl Farmhouse Sink Cutout
Ruvati
Ruvati RVL2300 Fiamma 33 Fireclay Farmhouse 33" Single Bowl Farmhouse Sink Cutout
Ruvati
The Ruvati RVL2100 Fiamma 30 Fireclay Farmhouse 30" Single Bowl Farmhouse Sink Cutout template delivers precision DXF geometry for professional stone fabrication. With dimensions of standard dimensions, this template provides CNC-ready profiles that ensure consistent, repeatable results. Designed for the sinks category, this template streamlines the fabrication process from initial programming through final finishing. Professional shops rely on accurate templates like this to minimize waste and maximize production efficiency across installations.
Installation Overview
Installing the Ruvati RVL2100 Fiamma 30 Fireclay Farmhouse 30" Single Bowl Farmhouse Sink Cutout template requires standard stone fabrication procedures adapted for the sinks category. Begin with accurate field measurements to verify the template dimensions match the installation site. Import the DXF file into CNC programming software and create an optimized cutting plan that minimizes material waste. For the cutting phase, select appropriate diamond tooling based on the stone type being fabricated. Maintain consistent coolant flow during all CNC operations to prevent thermal damage. After cutting, perform edge finishing according to the template specifications. Dry-fit all pieces at the installation site before applying adhesive. Use construction-grade silicone or epoxy appropriate for stone installations. Ensure proper support for all sections, adding brackets where overhangs exceed manufacturer recommendations. Apply a penetrating sealer after installation to protect the finished surface. Final inspection should verify all dimensions match the template within acceptable tolerances.
CNC Cutting Notes
CNC programming for the Ruvati RVL2100 Fiamma 30 Fireclay Farmhouse 30" Single Bowl Farmhouse Sink Cutout should account for tool wear compensation, especially on abrasive granite stones. Recommended parameters: spindle speed 4500-6500 RPM, feed rate 35-55 IPM for roughing. The ruvati geometry benefits from a two-pass strategy — rough to within 2mm of final profile, then finish at reduced feed rate (15-25 IPM). Use plunge rates no faster than 10 IPM to prevent tool breakage. Monitor vibration levels during cutting; excessive chatter indicates tool wear or incorrect speed/feed settings. Keep backup tooling on hand for production runs exceeding 50 linear feet of edge profile.
Material Compatibility
This ruvati profile is compatible with a wide range of countertop materials. Natural granite remains the most popular substrate, offering durability and an attractive polished finish. Engineered quartz performs excellently, with consistent material properties that make CNC cutting predictable and efficient. Marble requires more careful handling — reduce feed rates by 15-20% to prevent veining from causing unpredictable fractures. Quartzite is an excellent choice for this profile, as the material's hardness preserves fine geometric details through years of use. Dolomite and travertine can be profiled with adjusted parameters. Avoid ultra-thin porcelain slabs for complex profiles without proper backing support.
Where to Buy
Professional fabricators can source granite slabs from local stone distributors and wholesale suppliers. Visit SlabWise for template downloads and fabrication resources.