Ruvati RVH7433 Gravena 33x22 Low-Divide 33" Double Equal Bowl Undermount Sink Cutout
Description
Professional fabricators turn to the Ruvati RVH7433 Gravena 33x22 Low-Divide 33" Double Equal Bowl Undermount Sink Cutout template for accurate sinks production work. The standard dimensions specifications provide the exact geometry needed for CNC-based fabrication workflows. This DXF template eliminates manual layout work while ensuring every piece meets the tight tolerances required for quality installations. The design works well across multiple stone types and installation scenarios.
Dimensions
- Overall Width
- 33"
- Overall Depth
- 19"
- Bowl Width
- 31"
- Bowl Depth
- 17"
- Corner Radius
- 0.375"
Specifications
- Manufacturer
- Ruvati
- Model Number
- RVH7433
- Installation Type
- Undermount
- Bowl Configuration
- Single
- Material
- Stainless-Steel
- Min. Cabinet Width
- 36"
- Downloads
- 0
Related Templates
Ruvati RVG1033 Valencia 33x22 Granite Double 33" Double Equal Bowl Undermount Sink Cutout
Ruvati
Ruvati RVG1080 Valencia 33x22 Granite Single 33" Single Bowl Undermount Sink Cutout
Ruvati
Ruvati RVG2030 Valencia 30x18 Granite Composite 30" Single Bowl Undermount Sink Cutout
Ruvati
Ruvati RVG2033 Valencia 33x22 Granite Undermount 33" Single Bowl Undermount Sink Cutout
Ruvati
Professional fabricators turn to the Ruvati RVH7433 Gravena 33x22 Low-Divide 33" Double Equal Bowl Undermount Sink Cutout template for accurate sinks production work. The standard dimensions specifications provide the exact geometry needed for CNC-based fabrication workflows. This DXF template eliminates manual layout work while ensuring every piece meets the tight tolerances required for quality installations. The design works well across multiple stone types and installation scenarios.
Installation Overview
Installing the Ruvati RVH7433 Gravena 33x22 Low-Divide 33" Double Equal Bowl Undermount Sink Cutout template requires standard stone fabrication procedures adapted for the sinks category. Begin with accurate field measurements to verify the template dimensions match the installation site. Import the DXF file into CNC programming software and create an optimized cutting plan that minimizes material waste. For the cutting phase, select appropriate diamond tooling based on the stone type being fabricated. Maintain consistent coolant flow during all CNC operations to prevent thermal damage. After cutting, perform edge finishing according to the template specifications. Dry-fit all pieces at the installation site before applying adhesive. Use construction-grade silicone or epoxy appropriate for stone installations. Ensure proper support for all sections, adding brackets where overhangs exceed manufacturer recommendations. Apply a penetrating sealer after installation to protect the finished surface. Final inspection should verify all dimensions match the template within acceptable tolerances.
CNC Cutting Notes
CNC programming for the Ruvati RVH7433 Gravena 33x22 Low-Divide 33" Double Equal Bowl Undermount Sink Cutout should account for tool wear compensation, especially on abrasive natural stone stones. Recommended parameters: spindle speed 4500-6500 RPM, feed rate 35-55 IPM for roughing. The ruvati geometry benefits from a two-pass strategy — rough to within 2mm of final profile, then finish at reduced feed rate (15-25 IPM). Use plunge rates no faster than 10 IPM to prevent tool breakage. Monitor vibration levels during cutting; excessive chatter indicates tool wear or incorrect speed/feed settings. Keep backup tooling on hand for production runs exceeding 50 linear feet of edge profile.
Material Compatibility
The Ruvati RVH7433 Gravena 33x22 Low-Divide 33" Double Equal Bowl Undermount Sink Cutout profile pairs best with medium-to-hard natural stones and engineered materials. Granite is the ideal substrate, offering the hardness needed to maintain the ruvati geometry while accepting a brilliant polish. Quartz composites provide consistent results with minimal tool wear variation. For softer stones like marble or limestone, the profile remains achievable but requires adjusted CNC parameters and additional care during finishing. Exotic stones such as quartzite and super-white dolomite produce stunning results with this profile. Sintered stone panels are compatible when using specialized thin-material tooling. Always perform a test cut on representative material before beginning production runs.
Where to Buy
Professional fabricators can source natural stone slabs from local stone distributors and wholesale suppliers. Visit SlabWise for template downloads and fabrication resources.