KitchenAid KUDS-3522 35x22 Undermount Double 35" Double Equal Bowl Undermount Sink Cutout
Description
Professional fabricators turn to the KitchenAid KUDS-3522 35x22 Undermount Double 35" Double Equal Bowl Undermount Sink Cutout template for accurate sinks production work. The standard dimensions specifications provide the exact geometry needed for CNC-based fabrication workflows. This DXF template eliminates manual layout work while ensuring every piece meets the tight tolerances required for quality installations. The design works well across multiple stone types and installation scenarios.
Dimensions
- Overall Width
- 35"
- Overall Depth
- 22"
- Bowl Width
- 33"
- Bowl Depth
- 18"
- Corner Radius
- 0.5"
Specifications
- Manufacturer
- KitchenAid
- Model Number
- KUDS-3522
- Installation Type
- Undermount
- Bowl Configuration
- Double Equal
- Material
- Stainless-Steel
- Min. Cabinet Width
- 39"
- Downloads
- 0
Related Templates
KitchenAid KUDF-204EPA 33x22 Undermount Double 60/40 33" Double Offset Bowl Undermount Sink Cutout
KitchenAid
KitchenAid KUDF-204ESB 33x22 Undermount Double 50/50 33" Double Equal Bowl Undermount Sink Cutout
KitchenAid
KitchenAid KUDI-2522 25x22 Drop-In Single 25" Single Bowl Drop In Sink Cutout
KitchenAid
KitchenAid KUDI-3322 33x22 Drop-In Double 33" Double Equal Bowl Drop In Sink Cutout
KitchenAid
Professional fabricators turn to the KitchenAid KUDS-3522 35x22 Undermount Double 35" Double Equal Bowl Undermount Sink Cutout template for accurate sinks production work. The standard dimensions specifications provide the exact geometry needed for CNC-based fabrication workflows. This DXF template eliminates manual layout work while ensuring every piece meets the tight tolerances required for quality installations. The design works well across multiple stone types and installation scenarios.
Installation Overview
Installing the KitchenAid KUDS-3522 35x22 Undermount Double 35" Double Equal Bowl Undermount Sink Cutout template requires standard stone fabrication procedures adapted for the sinks category. Begin with accurate field measurements to verify the template dimensions match the installation site. Import the DXF file into CNC programming software and create an optimized cutting plan that minimizes material waste. For the cutting phase, select appropriate diamond tooling based on the stone type being fabricated. Maintain consistent coolant flow during all CNC operations to prevent thermal damage. After cutting, perform edge finishing according to the template specifications. Dry-fit all pieces at the installation site before applying adhesive. Use construction-grade silicone or epoxy appropriate for stone installations. Ensure proper support for all sections, adding brackets where overhangs exceed manufacturer recommendations. Apply a penetrating sealer after installation to protect the finished surface. Final inspection should verify all dimensions match the template within acceptable tolerances.
CNC Cutting Notes
CNC programming for the KitchenAid KUDS-3522 35x22 Undermount Double 35" Double Equal Bowl Undermount Sink Cutout should account for tool wear compensation, especially on abrasive natural stone stones. Recommended parameters: spindle speed 4500-6500 RPM, feed rate 35-55 IPM for roughing. The kitchenaid geometry benefits from a two-pass strategy — rough to within 2mm of final profile, then finish at reduced feed rate (15-25 IPM). Use plunge rates no faster than 10 IPM to prevent tool breakage. Monitor vibration levels during cutting; excessive chatter indicates tool wear or incorrect speed/feed settings. Keep backup tooling on hand for production runs exceeding 50 linear feet of edge profile.
Material Compatibility
The KitchenAid KUDS-3522 35x22 Undermount Double 35" Double Equal Bowl Undermount Sink Cutout template works exceptionally well with natural granite, providing clean edges that polish to a high gloss. Marble is also compatible, though the softer stone requires reduced feed rates during CNC operations to prevent micro-chipping. Quartzite offers excellent results with this profile, as the hard mineral structure holds fine details well. Engineered quartz composites are ideal substrates, offering consistent material properties that produce predictable results. Soapstone and slate can be profiled using this template with appropriate tooling adjustments. For limestone, use conservative CNC parameters due to the stone's tendency to chip on detailed profiles. Porcelain sintered stone panels require specialized diamond tooling but produce excellent results with the kitchenaid geometry.
Where to Buy
Professional fabricators can source natural stone slabs from local stone distributors and wholesale suppliers. Visit SlabWise for template downloads and fabrication resources.