Houzer STS-1300-1 Eston 15x15 Bar Prep 15" Single Bowl Undermount Sink Cutout
Description
The Houzer STS-1300-1 Eston 15x15 Bar Prep 15" Single Bowl Undermount Sink Cutout is a production-ready DXF template engineered for sinks fabrication projects. At standard dimensions, this template addresses the specific requirements of professional stone fabrication with accurate CNC-ready geometry. Fabricators benefit from standardized dimensions that reduce setup time and improve consistency. This template represents proven configurations used daily in professional fabrication shops.
Dimensions
- Overall Width
- 23.25"
- Overall Depth
- 17.5"
- Bowl Width
- 21.25"
- Bowl Depth
- 15.5"
- Corner Radius
- 0.375"
Specifications
- Manufacturer
- Houzer
- Model Number
- STS-1300-1
- Installation Type
- Undermount
- Bowl Configuration
- Single
- Material
- Stainless-Steel
- Min. Cabinet Width
- 18"
- Downloads
- 0
Related Templates
Houzer BCS-2522 Belleo 25x22 Drop-In Single 25" Single Bowl Drop In Sink Cutout
Houzer
Houzer BCS-3321 Belleo 33x21 Drop-In Single 33" Single Bowl Drop In Sink Cutout
Houzer
Houzer BLS-3217 Belleo 32x17 Single 32" Single Bowl Undermount Sink Cutout
Houzer
Houzer BSG-3018 Belleo 30x18 Granite 30" Single Bowl Undermount Sink Cutout
Houzer
The Houzer STS-1300-1 Eston 15x15 Bar Prep 15" Single Bowl Undermount Sink Cutout is a production-ready DXF template engineered for sinks fabrication projects. At standard dimensions, this template addresses the specific requirements of professional stone fabrication with accurate CNC-ready geometry. Fabricators benefit from standardized dimensions that reduce setup time and improve consistency. This template represents proven configurations used daily in professional fabrication shops.
Installation Overview
Installing the Houzer STS-1300-1 Eston 15x15 Bar Prep 15" Single Bowl Undermount Sink Cutout template requires standard stone fabrication procedures adapted for the sinks category. Begin with accurate field measurements to verify the template dimensions match the installation site. Import the DXF file into CNC programming software and create an optimized cutting plan that minimizes material waste. For the cutting phase, select appropriate diamond tooling based on the stone type being fabricated. Maintain consistent coolant flow during all CNC operations to prevent thermal damage. After cutting, perform edge finishing according to the template specifications. Dry-fit all pieces at the installation site before applying adhesive. Use construction-grade silicone or epoxy appropriate for stone installations. Ensure proper support for all sections, adding brackets where overhangs exceed manufacturer recommendations. Apply a penetrating sealer after installation to protect the finished surface. Final inspection should verify all dimensions match the template within acceptable tolerances.
CNC Cutting Notes
For the Houzer STS-1300-1 Eston 15x15 Bar Prep 15" Single Bowl Undermount Sink Cutout profile, set your CNC router spindle speed between 5000-7000 RPM for engineered quartz substrates. Use a feed rate of 40-60 IPM for roughing passes and reduce to 20-30 IPM for finishing passes. Select a diamond-tipped profile bit matching the template radius specifications. Program the toolpath using climb milling for cleaner cuts on the houzer geometry. Maintain coolant flow at 2+ GPM to prevent thermal fracturing. For harder stones like granite, reduce feed rates by 20% and increase water flow. Run a test cut on scrap material to verify the profile matches the DXF template before committing to production stock.
Material Compatibility
The Houzer STS-1300-1 Eston 15x15 Bar Prep 15" Single Bowl Undermount Sink Cutout template works exceptionally well with natural granite, providing clean edges that polish to a high gloss. Marble is also compatible, though the softer stone requires reduced feed rates during CNC operations to prevent micro-chipping. Quartzite offers excellent results with this profile, as the hard mineral structure holds fine details well. Engineered quartz composites are ideal substrates, offering consistent material properties that produce predictable results. Soapstone and slate can be profiled using this template with appropriate tooling adjustments. For limestone, use conservative CNC parameters due to the stone's tendency to chip on detailed profiles. Porcelain sintered stone panels require specialized diamond tooling but produce excellent results with the houzer geometry.
Where to Buy
Professional fabricators can source engineered quartz slabs from local stone distributors and wholesale suppliers. Visit SlabWise for template downloads and fabrication resources.