Houzer EHD-3322 Eston 33x22 Double 50/50 33" Double Equal Bowl Undermount Sink Cutout
Description
The Houzer EHD-3322 Eston 33x22 Double 50/50 33" Double Equal Bowl Undermount Sink Cutout template delivers precision DXF geometry for professional stone fabrication. With dimensions of standard dimensions, this template provides CNC-ready profiles that ensure consistent, repeatable results. Designed for the sinks category, this template streamlines the fabrication process from initial programming through final finishing. Professional shops rely on accurate templates like this to minimize waste and maximize production efficiency across installations.
Dimensions
- Overall Width
- 33"
- Overall Depth
- 22"
- Bowl Width
- 14.0625"
- Bowl Depth
- 15.75"
- Corner Radius
- 0.375"
Specifications
- Manufacturer
- Houzer
- Model Number
- EHD-3322
- Installation Type
- Undermount
- Bowl Configuration
- Double Equal
- Material
- Stainless-Steel
- Min. Cabinet Width
- 36"
- Downloads
- 0
Related Templates
Houzer BCS-2522 Belleo 25x22 Drop-In Single 25" Single Bowl Drop In Sink Cutout
Houzer
Houzer BCS-3321 Belleo 33x21 Drop-In Single 33" Single Bowl Drop In Sink Cutout
Houzer
Houzer BLS-3217 Belleo 32x17 Single 32" Single Bowl Undermount Sink Cutout
Houzer
Houzer BSG-3018 Belleo 30x18 Granite 30" Single Bowl Undermount Sink Cutout
Houzer
The Houzer EHD-3322 Eston 33x22 Double 50/50 33" Double Equal Bowl Undermount Sink Cutout template delivers precision DXF geometry for professional stone fabrication. With dimensions of standard dimensions, this template provides CNC-ready profiles that ensure consistent, repeatable results. Designed for the sinks category, this template streamlines the fabrication process from initial programming through final finishing. Professional shops rely on accurate templates like this to minimize waste and maximize production efficiency across installations.
Installation Overview
The fabrication process for the Houzer EHD-3322 Eston 33x22 Double 50/50 33" Double Equal Bowl Undermount Sink Cutout begins with DXF template verification and material selection. Import the template geometry into your CAM software, setting appropriate tool paths for the sinks specifications. Select diamond tooling rated for the specific stone material being processed. CNC cutting should proceed in stages: roughing passes followed by finishing passes at full depth. Maintain proper coolant flow throughout all machining operations. After all pieces are cut, perform any required edge finishing or polishing operations. Transport pieces to the installation site using appropriate lifting equipment and A-frame racks. On-site, verify cabinet or substrate preparation meets installation requirements. Apply adhesive in the recommended pattern and set pieces beginning with the largest section. Complete all joints with color-matched epoxy. Allow full cure time before loading the installation with fixtures or appliances. Seal all exposed surfaces with an appropriate stone sealer.
CNC Cutting Notes
For the Houzer EHD-3322 Eston 33x22 Double 50/50 33" Double Equal Bowl Undermount Sink Cutout profile, set your CNC router spindle speed between 5000-7000 RPM for marble substrates. Use a feed rate of 40-60 IPM for roughing passes and reduce to 20-30 IPM for finishing passes. Select a diamond-tipped profile bit matching the template radius specifications. Program the toolpath using climb milling for cleaner cuts on the houzer geometry. Maintain coolant flow at 2+ GPM to prevent thermal fracturing. For harder stones like granite, reduce feed rates by 20% and increase water flow. Run a test cut on scrap material to verify the profile matches the DXF template before committing to production stock.
Material Compatibility
The Houzer EHD-3322 Eston 33x22 Double 50/50 33" Double Equal Bowl Undermount Sink Cutout profile pairs best with medium-to-hard natural stones and engineered materials. Granite is the ideal substrate, offering the hardness needed to maintain the houzer geometry while accepting a brilliant polish. Quartz composites provide consistent results with minimal tool wear variation. For softer stones like marble or limestone, the profile remains achievable but requires adjusted CNC parameters and additional care during finishing. Exotic stones such as quartzite and super-white dolomite produce stunning results with this profile. Sintered stone panels are compatible when using specialized thin-material tooling. Always perform a test cut on representative material before beginning production runs.
Where to Buy
Professional fabricators can source marble slabs from local stone distributors and wholesale suppliers. Visit SlabWise for template downloads and fabrication resources.