Franke MAG66034 Maris 34 Granite Double Sink Cutout
Franke MAG66034 Maris 34 Granite Double Sink Cutout
Description
The Franke MAG66034 Maris 34 Granite Double Sink Cutout is a production-ready DXF template engineered for sinks fabrication projects. At standard dimensions, this template addresses the specific requirements of professional stone fabrication with accurate CNC-ready geometry. Fabricators benefit from standardized dimensions that reduce setup time and improve consistency. This template represents proven configurations used daily in professional fabrication shops.
Dimensions
- Overall Width
- 30.984"
- Overall Depth
- 20.866"
- Bowl Width
- 16.945"
- Bowl Depth
- 15.606"
- Corner Radius
- 0.75"
Specifications
- Manufacturer
- Franke
- Model Number
- MAG66034
- Installation Type
- Undermount
- Bowl Configuration
- Double
- Material
- Granite-Composite
- Min. Cabinet Width
- 36"
- Downloads
- 0
Related Templates
Franke 122.0530.830 Professional 2.0 Sink - PS2X110-18 Stainless steel Kitchen Cutout
Franke
Franke 122.0530.923 Professional 2.0 Sink - PS2X110-21 Stainless steel Kitchen Cutout
Franke
Franke 122.0530.924 Professional 2.0 Sink - PS2X110-24 Stainless steel Kitchen Cutout
Franke
Franke 122.0530.925 Professional 2.0 Sink - PS2X110-24-12 Stainless steel Kitchen Cutout
Franke
Answer summary
What is the Franke MAG66034 Maris 34 Granite Double Sink Cutout DXF template for?
Franke MAG66034 Maris 34 Granite Double Sink Cutout is a sink cutouts DXF template for countertop fabrication. Use it only after matching the manufacturer, model, dimensions, variant, and shop workflow to the actual job.
Risk check: Similar-looking products can use different cutout geometry. Confirm the official spec, shop tolerance, material behavior, and CNC output before production.
Next step: Run a DXF check, compare related templates, and keep the current manufacturer spec with the job packet.
Template decision guide
Should you use the Franke MAG66034 Maris 34 Granite Double Sink Cutout DXF template?
Use the template page to shortlist a production file, then verify the exact model, variant, and machine workflow before cutting.
Best fit
Franke MAG66034 Maris 34 Granite Double Sink Cutout is most useful when the product, manufacturer, model, install type, and variant match the job you are fabricating.
What to compare
Compare model number, dimensions, reveal or overhang, bowl or appliance geometry, material thickness, and CNC output requirements.
Risk check
Do not use a similar-looking template as a final production file. Small changes in flange, radius, trim, or reveal can cause a failed cutout.
Evidence to verify
Check the current manufacturer spec, field measurement, template preview, DXF layers, and a shop-approved tolerance before production.
Page-specific notes
Page-specific notes for Franke MAG66034 Maris 34 Granite Double Sink Cutout
These notes are assembled from this exact template record, its category, available variants, and nearby template comparisons. They are meant to make the page more useful than a generic download page.
Exact record SlabWise is using
Franke MAG66034 is filed under Sink Cutouts. The normalized record lists width 30.984", depth 20.866", bowl width 16.945", bowl depth 15.606", corner radius 0.75", so the safest use is as a production starting point that still gets checked against the current job packet.
Variant choice
This page exposes 4 variants: No Reveal (Flush), 1/8" Reveal, 1/2" Overhang, Drop-in. Pick the variant that matches reveal, overhang, install style, and shop standard before exporting to CAM.
Category-specific production check
Sink Cutouts files should be checked for fit against material thickness, edge treatment, sink or appliance clearance, CNC layer expectations, and the shop's preferred tolerance before cutting customer material.
Closest comparisons
Before choosing this file, compare it with Franke 122.0530.830 Professional 2.0 Sink - PS2X110-18 Stainless steel Kitchen Cutout, Franke 122.0530.923 Professional 2.0 Sink - PS2X110-21 Stainless steel Kitchen Cutout, Franke 122.0530.924 Professional 2.0 Sink - PS2X110-24 Stainless steel Kitchen Cutout to catch small model, radius, flange, or layout differences that can change the final cut.
Evidence already attached
This page has extra enrichment for installation overview, CNC cutting notes, material compatibility, buying context. Use those notes as decision support, then keep the official product spec with the job.
The Franke MAG66034 Maris 34 Granite Double Sink Cutout is a production-ready DXF template engineered for sinks fabrication projects. At standard dimensions, this template addresses the specific requirements of professional stone fabrication with accurate CNC-ready geometry. Fabricators benefit from standardized dimensions that reduce setup time and improve consistency. This template represents proven configurations used daily in professional fabrication shops.
Installation Overview
The fabrication process for the Franke MAG66034 Maris 34 Granite Double Sink Cutout begins with DXF template verification and material selection. Import the template geometry into your CAM software, setting appropriate tool paths for the sinks specifications. Select diamond tooling rated for the specific stone material being processed. CNC cutting should proceed in stages: roughing passes followed by finishing passes at full depth. Maintain proper coolant flow throughout all machining operations. After all pieces are cut, perform any required edge finishing or polishing operations. Transport pieces to the installation site using appropriate lifting equipment and A-frame racks. On-site, verify cabinet or substrate preparation meets installation requirements. Apply adhesive in the recommended pattern and set pieces beginning with the largest section. Complete all joints with color-matched epoxy. Allow full cure time before loading the installation with fixtures or appliances. Seal all exposed surfaces with an appropriate stone sealer.
CNC Cutting Notes
Optimal CNC settings for the Franke MAG66034 Maris 34 Granite Double Sink Cutout template depend on the substrate material. For natural granite, use 4000-5500 RPM with 30-50 IPM feed. For quartz composites, increase to 5500-7000 RPM at 45-65 IPM. The franke profile requires careful attention to entry and exit points on the toolpath to prevent edge chipping. Program multiple depth passes rather than a single full-depth cut. Coolant temperature should remain below 70°F for optimal diamond tool performance. Dress profiling wheels after every 20-30 linear feet of cutting to maintain profile accuracy.
Material Compatibility
This franke profile is compatible with a wide range of countertop materials. Natural granite remains the most popular substrate, offering durability and an attractive polished finish. Engineered quartz performs excellently, with consistent material properties that make CNC cutting predictable and efficient. Marble requires more careful handling — reduce feed rates by 15-20% to prevent veining from causing unpredictable fractures. Quartzite is an excellent choice for this profile, as the material's hardness preserves fine geometric details through years of use. Dolomite and travertine can be profiled with adjusted parameters. Avoid ultra-thin porcelain slabs for complex profiles without proper backing support.
Where to Buy
Professional fabricators can source dolomite slabs from local stone distributors and wholesale suppliers. Visit SlabWise for template downloads and fabrication resources.