Elkay Quartz ELGU-3322DBK Classic 33x22 Double Black 33" Double Equal Bowl Undermount Sink Cutout
Description
Professional fabricators turn to the Elkay Quartz ELGU-3322DBK Classic 33x22 Double Black 33" Double Equal Bowl Undermount Sink Cutout template for accurate sinks production work. The standard dimensions specifications provide the exact geometry needed for CNC-based fabrication workflows. This DXF template eliminates manual layout work while ensuring every piece meets the tight tolerances required for quality installations. The design works well across multiple stone types and installation scenarios.
Dimensions
- Overall Width
- 33"
- Overall Depth
- 18.5"
- Bowl Width
- 14.254"
- Bowl Depth
- 16.1875"
- Corner Radius
- 0.75"
Specifications
- Manufacturer
- Elkay Quartz
- Model Number
- ELGU-3322DBK
- Installation Type
- Undermount
- Bowl Configuration
- Double Equal
- Material
- Quartz-Composite
- Min. Cabinet Width
- 36"
- Downloads
- 0
Related Templates
Elkay Quartz ELGF-3020BK Farmhouse 30x20 Black 30" Single Bowl Farmhouse Sink Cutout
Elkay Quartz
Elkay Quartz ELGF-3320BK Farmhouse 33x20 Black 33" Single Bowl Farmhouse Sink Cutout
Elkay Quartz
Elkay Quartz ELGU-1515BK Classic 15x15 Bar Black 15" Single Bowl Undermount Sink Cutout
Elkay Quartz
Elkay Quartz ELGU-2522BK Classic 25x22 Undermount Black 25" Single Bowl Undermount Sink Cutout
Elkay Quartz
Professional fabricators turn to the Elkay Quartz ELGU-3322DBK Classic 33x22 Double Black 33" Double Equal Bowl Undermount Sink Cutout template for accurate sinks production work. The standard dimensions specifications provide the exact geometry needed for CNC-based fabrication workflows. This DXF template eliminates manual layout work while ensuring every piece meets the tight tolerances required for quality installations. The design works well across multiple stone types and installation scenarios.
Installation Overview
Installing the Elkay Quartz ELGU-3322DBK Classic 33x22 Double Black 33" Double Equal Bowl Undermount Sink Cutout template requires standard stone fabrication procedures adapted for the sinks category. Begin with accurate field measurements to verify the template dimensions match the installation site. Import the DXF file into CNC programming software and create an optimized cutting plan that minimizes material waste. For the cutting phase, select appropriate diamond tooling based on the stone type being fabricated. Maintain consistent coolant flow during all CNC operations to prevent thermal damage. After cutting, perform edge finishing according to the template specifications. Dry-fit all pieces at the installation site before applying adhesive. Use construction-grade silicone or epoxy appropriate for stone installations. Ensure proper support for all sections, adding brackets where overhangs exceed manufacturer recommendations. Apply a penetrating sealer after installation to protect the finished surface. Final inspection should verify all dimensions match the template within acceptable tolerances.
CNC Cutting Notes
CNC programming for the Elkay Quartz ELGU-3322DBK Classic 33x22 Double Black 33" Double Equal Bowl Undermount Sink Cutout should account for tool wear compensation, especially on abrasive quartzite stones. Recommended parameters: spindle speed 4500-6500 RPM, feed rate 35-55 IPM for roughing. The elkay geometry benefits from a two-pass strategy — rough to within 2mm of final profile, then finish at reduced feed rate (15-25 IPM). Use plunge rates no faster than 10 IPM to prevent tool breakage. Monitor vibration levels during cutting; excessive chatter indicates tool wear or incorrect speed/feed settings. Keep backup tooling on hand for production runs exceeding 50 linear feet of edge profile.
Material Compatibility
This elkay profile is compatible with a wide range of countertop materials. Natural granite remains the most popular substrate, offering durability and an attractive polished finish. Engineered quartz performs excellently, with consistent material properties that make CNC cutting predictable and efficient. Marble requires more careful handling — reduce feed rates by 15-20% to prevent veining from causing unpredictable fractures. Quartzite is an excellent choice for this profile, as the material's hardness preserves fine geometric details through years of use. Dolomite and travertine can be profiled with adjusted parameters. Avoid ultra-thin porcelain slabs for complex profiles without proper backing support.
Where to Buy
Professional fabricators can source quartzite slabs from local stone distributors and wholesale suppliers. Visit SlabWise for template downloads and fabrication resources.