E2 Stainless ECLIPSE SRD-5050 Undermount Stainless Steel Cutout
E2 Stainless ECLIPSE SRD-5050 Undermount Stainless Steel Cutout
Description
The E2 Stainless ECLIPSE SRD-5050 Undermount Stainless Steel Cutout is a production-ready DXF template engineered for sinks fabrication projects. At standard dimensions, this template addresses the specific requirements of professional stone fabrication with accurate CNC-ready geometry. Fabricators benefit from standardized dimensions that reduce setup time and improve consistency. This template represents proven configurations used daily in professional fabrication shops.
Dimensions
- Overall Width
- 31.25"
- Overall Depth
- 18.125"
- Bowl Width
- 14"
- Bowl Depth
- 16.125"
Specifications
- Manufacturer
- E2 Stainless
- Model Number
- ECLIPSE SRD-5050
- Installation Type
- Undermount
- Bowl Configuration
- Single
- Material
- Stainless-Steel
- Min. Cabinet Width
- 34"
- Downloads
- 0
Related Templates
E2 Stainless ECLIPSE 183 Undermount Stainless Steel Cutout
E2 Stainless
E2 Stainless ECLIPSE 193 Undermount Stainless Steel Cutout
E2 Stainless
E2 Stainless ECLIPSE 194 Undermount Stainless Steel Cutout
E2 Stainless
E2 Stainless ECLIPSE 301 Undermount Stainless Steel Cutout
E2 Stainless
Answer summary
What is the E2 Stainless ECLIPSE SRD-5050 Undermount Stainless Steel Cutout DXF template for?
E2 Stainless ECLIPSE SRD-5050 Undermount Stainless Steel Cutout is a sink cutouts DXF template for countertop fabrication. Use it only after matching the manufacturer, model, dimensions, variant, and shop workflow to the actual job.
Risk check: Similar-looking products can use different cutout geometry. Confirm the official spec, shop tolerance, material behavior, and CNC output before production.
Next step: Run a DXF check, compare related templates, and keep the current manufacturer spec with the job packet.
Template decision guide
Should you use the E2 Stainless ECLIPSE SRD-5050 Undermount Stainless Steel Cutout DXF template?
Use the template page to shortlist a production file, then verify the exact model, variant, and machine workflow before cutting.
Best fit
E2 Stainless ECLIPSE SRD-5050 Undermount Stainless Steel Cutout is most useful when the product, manufacturer, model, install type, and variant match the job you are fabricating.
What to compare
Compare model number, dimensions, reveal or overhang, bowl or appliance geometry, material thickness, and CNC output requirements.
Risk check
Do not use a similar-looking template as a final production file. Small changes in flange, radius, trim, or reveal can cause a failed cutout.
Evidence to verify
Check the current manufacturer spec, field measurement, template preview, DXF layers, and a shop-approved tolerance before production.
Page-specific notes
Page-specific notes for E2 Stainless ECLIPSE SRD-5050 Undermount Stainless Steel Cutout
These notes are assembled from this exact template record, its category, available variants, and nearby template comparisons. They are meant to make the page more useful than a generic download page.
Exact record SlabWise is using
E2 Stainless ECLIPSE SRD-5050 is filed under Sink Cutouts. The normalized record lists width 31.25", depth 18.125", bowl width 14", bowl depth 16.125", so the safest use is as a production starting point that still gets checked against the current job packet.
Variant choice
This page exposes 4 variants: No Reveal (Flush), 1/8" Reveal, 1/2" Overhang, Drop-in. Pick the variant that matches reveal, overhang, install style, and shop standard before exporting to CAM.
Category-specific production check
Sink Cutouts files should be checked for fit against material thickness, edge treatment, sink or appliance clearance, CNC layer expectations, and the shop's preferred tolerance before cutting customer material.
Closest comparisons
Before choosing this file, compare it with E2 Stainless ECLIPSE 183 Undermount Stainless Steel Cutout, E2 Stainless ECLIPSE 193 Undermount Stainless Steel Cutout, E2 Stainless ECLIPSE 194 Undermount Stainless Steel Cutout to catch small model, radius, flange, or layout differences that can change the final cut.
Evidence already attached
This page has extra enrichment for installation overview, CNC cutting notes, material compatibility, buying context. Use those notes as decision support, then keep the official product spec with the job.
The E2 Stainless ECLIPSE SRD-5050 Undermount Stainless Steel Cutout is a production-ready DXF template engineered for sinks fabrication projects. At standard dimensions, this template addresses the specific requirements of professional stone fabrication with accurate CNC-ready geometry. Fabricators benefit from standardized dimensions that reduce setup time and improve consistency. This template represents proven configurations used daily in professional fabrication shops.
Installation Overview
The fabrication process for the E2 Stainless ECLIPSE SRD-5050 Undermount Stainless Steel Cutout begins with DXF template verification and material selection. Import the template geometry into your CAM software, setting appropriate tool paths for the sinks specifications. Select diamond tooling rated for the specific stone material being processed. CNC cutting should proceed in stages: roughing passes followed by finishing passes at full depth. Maintain proper coolant flow throughout all machining operations. After all pieces are cut, perform any required edge finishing or polishing operations. Transport pieces to the installation site using appropriate lifting equipment and A-frame racks. On-site, verify cabinet or substrate preparation meets installation requirements. Apply adhesive in the recommended pattern and set pieces beginning with the largest section. Complete all joints with color-matched epoxy. Allow full cure time before loading the installation with fixtures or appliances. Seal all exposed surfaces with an appropriate stone sealer.
CNC Cutting Notes
For the E2 Stainless ECLIPSE SRD-5050 Undermount Stainless Steel Cutout profile, set your CNC router spindle speed between 5000-7000 RPM for dolomite substrates. Use a feed rate of 40-60 IPM for roughing passes and reduce to 20-30 IPM for finishing passes. Select a diamond-tipped profile bit matching the template radius specifications. Program the toolpath using climb milling for cleaner cuts on the e2 geometry. Maintain coolant flow at 2+ GPM to prevent thermal fracturing. For harder stones like granite, reduce feed rates by 20% and increase water flow. Run a test cut on scrap material to verify the profile matches the DXF template before committing to production stock.
Material Compatibility
This e2 profile is compatible with a wide range of countertop materials. Natural granite remains the most popular substrate, offering durability and an attractive polished finish. Engineered quartz performs excellently, with consistent material properties that make CNC cutting predictable and efficient. Marble requires more careful handling — reduce feed rates by 15-20% to prevent veining from causing unpredictable fractures. Quartzite is an excellent choice for this profile, as the material's hardness preserves fine geometric details through years of use. Dolomite and travertine can be profiled with adjusted parameters. Avoid ultra-thin porcelain slabs for complex profiles without proper backing support.
Where to Buy
Professional fabricators can source dolomite slabs from local stone distributors and wholesale suppliers. Visit SlabWise for template downloads and fabrication resources.