American Standard 12DB321100 Quince 33 Double Drop-In Sink Cutout
Description
As a countertop fabricator, precision matters when cutting sink openings in natural stone, quartz, or solid surface materials. This production-ready DXF template for the American Standard 12DB321100 Quince 33 double bowl drop-in sink ensures accurate cutouts every time. The Quince series combines durability with a clean aesthetic, making it a popular choice for residential and light commercial kitchen installations. Our template includes four reveal variants to accommodate different installation preferences and edge profiles.
Dimensions
- Overall Width
- 33"
- Overall Depth
- 22"
- Bowl Width
- 30.5"
- Bowl Depth
- 18"
- Corner Radius
- 0.375"
Specifications
- Manufacturer
- American Standard
- Model Number
- 12DB321100
- Installation Type
- Drop-In
- Bowl Configuration
- Double
- Material
- Stainless-Steel
- Min. Cabinet Width
- 36"
- Downloads
- 0
Related Templates
American Standard 0075000 Studio Undermount Bath Sink Cutout
American Standard
American Standard 0495300 Ovalyn Undermount 19 Sink Cutout
American Standard
American Standard 0496221 Ovalyn Undermount 15 Sink Cutout
American Standard
American Standard 0585000 Ovalyn Undermount 17 Sink Cutout
American Standard
Answer summary
What is the American Standard 12DB321100 Quince 33 Double Drop-In Sink Cutout DXF template for?
American Standard 12DB321100 Quince 33 Double Drop-In Sink Cutout is a sink cutouts DXF template for countertop fabrication. Use it only after matching the manufacturer, model, dimensions, variant, and shop workflow to the actual job.
Risk check: Similar-looking products can use different cutout geometry. Confirm the official spec, shop tolerance, material behavior, and CNC output before production.
Next step: Run a DXF check, compare related templates, and keep the current manufacturer spec with the job packet.
Template decision guide
Should you use the American Standard 12DB321100 Quince 33 Double Drop-In Sink Cutout DXF template?
Use the template page to shortlist a production file, then verify the exact model, variant, and machine workflow before cutting.
Best fit
American Standard 12DB321100 Quince 33 Double Drop-In Sink Cutout is most useful when the product, manufacturer, model, install type, and variant match the job you are fabricating.
What to compare
Compare model number, dimensions, reveal or overhang, bowl or appliance geometry, material thickness, and CNC output requirements.
Risk check
Do not use a similar-looking template as a final production file. Small changes in flange, radius, trim, or reveal can cause a failed cutout.
Evidence to verify
Check the current manufacturer spec, field measurement, template preview, DXF layers, and a shop-approved tolerance before production.
Page-specific notes
Page-specific notes for American Standard 12DB321100 Quince 33 Double Drop-In Sink Cutout
These notes are assembled from this exact template record, its category, available variants, and nearby template comparisons. They are meant to make the page more useful than a generic download page.
Exact record SlabWise is using
American Standard 12DB321100 is filed under Sink Cutouts. The normalized record lists width 33", depth 22", bowl width 30.5", bowl depth 18", corner radius 0.375", so the safest use is as a production starting point that still gets checked against the current job packet.
Variant choice
This page exposes 4 variants: No Reveal (Flush), 1/8" Reveal, 1/2" Overhang, Drop-in. Pick the variant that matches reveal, overhang, install style, and shop standard before exporting to CAM.
Category-specific production check
Sink Cutouts files should be checked for fit against material thickness, edge treatment, sink or appliance clearance, CNC layer expectations, and the shop's preferred tolerance before cutting customer material.
Closest comparisons
Before choosing this file, compare it with American Standard 0075000 Studio Undermount Bath Sink Cutout, American Standard 0495300 Ovalyn Undermount 19 Sink Cutout, American Standard 0496221 Ovalyn Undermount 15 Sink Cutout to catch small model, radius, flange, or layout differences that can change the final cut.
Evidence already attached
This page has extra enrichment for installation overview, CNC cutting notes, material compatibility, buying context. Use those notes as decision support, then keep the official product spec with the job.
As a countertop fabricator, precision matters when cutting sink openings in natural stone, quartz, or solid surface materials. This production-ready DXF template for the American Standard 12DB321100 Quince 33 double bowl drop-in sink ensures accurate cutouts every time. The Quince series combines durability with a clean aesthetic, making it a popular choice for residential and light commercial kitchen installations. Our template includes four reveal variants to accommodate different installation preferences and edge profiles.
Installation Overview
The American Standard Quince 33 double bowl sink measures 33 inches wide by 22 inches deep, requiring a minimum 36-inch cabinet base. This drop-in configuration features two equal-sized bowls, each 8 inches deep, providing excellent functionality for busy kitchens. When fabricating the countertop cutout, consider the installation type: flush mount (no reveal) creates a seamless look where the sink rim sits level with the countertop, 1/8 inch reveal provides a small ledge that helps prevent water from running under the rim, 1/2 inch overhang allows the countertop to extend slightly over the cutout for added protection, and full drop-in uses the sink's full outer dimensions for traditional top-mount installation. The stainless steel construction offers excellent corrosion resistance and pairs well with all countertop materials. Before cutting, verify the sink dimensions with your actual unit, as manufacturing tolerances can vary. Support the cutout section during the final moments of cutting to prevent stress cracks in the stone.
CNC Cutting Notes
Programming your CNC machine for this sink cutout requires attention to several key details. The template includes precise corner radii of 0.375 inches (3/8 inch), which should be cut with an appropriate diameter bit to maintain accuracy. For granite and quartz, use a diamond-coated router bit with a feed rate of 60-100 inches per minute and spindle speed of 10,000-12,000 RPM. Apply constant water cooling to prevent heat buildup and micro-cracking along the cut edge. The bowl dimensions of 30.5 inches by 18 inches (interior) allow adequate space for the double basin configuration. When using the 1/8 inch reveal variant, the cutout dimensions reduce to 30.25 by 17.75 inches, requiring careful tool offset calculations. For undermount installations (though this is primarily a drop-in sink), add a 1-2 degree bevel on the underside edge to ensure proper seating. Always perform a dry fit before final installation, checking for any high spots or interference with the sink rim. The corner radius is critical - too tight and the sink won't fit, too loose and you'll have unsightly gaps.
Material Compatibility
Granite: Excellent compatibility. The Quince double bowl works beautifully with all granite colors and patterns. Ensure clean, square cuts with polished edges for drop-in applications. Quartz: Perfect match for engineered quartz countertops. The sink's stainless finish complements both cool and warm quartz tones. Use sharp diamond bits to prevent chipping. Marble: Compatible but requires careful handling. Marble's softer nature means extra care during cutting. The sink's weight is well-distributed across the rim. Quartzite: Excellent choice for quartzite installations. The harder material requires slower feed rates but produces exceptionally clean cuts. Solid Surface: Works well with Corian and other solid surface materials. Standard carbide routing bits are acceptable. The drop-in rim conceals the cut edge. Butcher Block: Can be installed in wood countertops with proper sealing. Apply multiple coats of waterproof sealant around the cutout before sink installation. Laminate: Suitable for laminate countertops. Use a zero-clearance cutting approach and seal all exposed substrate edges before installation.
Where to Buy
Intro: The American Standard 12DB321100 Quince 33 double bowl sink is widely available through multiple channels, making it convenient for both fabricators and homeowners to source. Retailers: Name: Ferguson Description: Leading plumbing distributor with trade pricing for fabricators. Offers will-call pickup and job-site delivery. Url: https://www.ferguson.com Name: The Home Depot Description: Wide availability with in-store pickup options. Good for quick replacements and customer direct purchases. Url: https://www.homedepot.com Name: Lowe's Description: Competitive pricing with professional contractor programs. Many locations stock Quince series sinks. Url: https://www.lowes.com Name: American Standard Direct Description: Manufacturer direct sales with full product line access. Best for specifications and technical support. Url: https://www.americanstandard-us.com Name: AF Supply Description: Professional plumbing supply with fabricator accounts. Good for bulk orders and special finishes. Url: https://www.afsupply.com Fabricator Tip: Establish accounts with at least two suppliers to ensure product availability and competitive pricing. Many fabricators maintain a Ferguson trade account for reliable sourcing and fast turnaround on custom orders.