Description
The Outdoor Kitchen With Refrigerator Cutout - xl-12ft (Soapstone Finish) template delivers precision DXF geometry for professional stone fabrication. With dimensions of 144" width, 25.5" depth, this template provides CNC-ready profiles that ensure consistent, repeatable results. Designed for the outdoor category, this template streamlines the fabrication process from initial programming through final finishing. Professional shops rely on accurate templates like this to minimize waste and maximize production efficiency across installations.
Dimensions
- Overall Width
- 144"
- Overall Depth
- 25.5"
Specifications
- Downloads
- 0
Related Templates
Outdoor Kitchen Outdoor Bar with Waterfall - compact-6ft (Concrete Finish)
Outdoor Kitchen Outdoor Bar with Waterfall - compact-6ft (Granite Finish)
Outdoor Kitchen Outdoor Bar with Waterfall - compact-6ft (Porcelain Finish)
Outdoor Kitchen Outdoor Bar with Waterfall - compact-6ft (Quartzite Finish)
The Outdoor Kitchen With Refrigerator Cutout - xl-12ft (Soapstone Finish) template delivers precision DXF geometry for professional stone fabrication. With dimensions of 144" width, 25.5" depth, this template provides CNC-ready profiles that ensure consistent, repeatable results. Designed for the outdoor category, this template streamlines the fabrication process from initial programming through final finishing. Professional shops rely on accurate templates like this to minimize waste and maximize production efficiency across installations.
Installation Overview
Installing the Outdoor Kitchen With Refrigerator Cutout - xl-12ft (Soapstone Finish) template requires standard stone fabrication procedures adapted for the outdoor category. Begin with accurate field measurements to verify the template dimensions match the installation site. Import the DXF file into CNC programming software and create an optimized cutting plan that minimizes material waste. For the cutting phase, select appropriate diamond tooling based on the stone type being fabricated. Maintain consistent coolant flow during all CNC operations to prevent thermal damage. After cutting, perform edge finishing according to the template specifications. Dry-fit all pieces at the installation site before applying adhesive. Use construction-grade silicone or epoxy appropriate for stone installations. Ensure proper support for all sections, adding brackets where overhangs exceed manufacturer recommendations. Apply a penetrating sealer after installation to protect the finished surface. Final inspection should verify all dimensions match the template within acceptable tolerances.
CNC Cutting Notes
CNC programming for the Outdoor Kitchen With Refrigerator Cutout - xl-12ft (Soapstone Finish) should account for tool wear compensation, especially on abrasive granite stones. Recommended parameters: spindle speed 4500-6500 RPM, feed rate 35-55 IPM for roughing. The refrigerator geometry benefits from a two-pass strategy — rough to within 2mm of final profile, then finish at reduced feed rate (15-25 IPM). Use plunge rates no faster than 10 IPM to prevent tool breakage. Monitor vibration levels during cutting; excessive chatter indicates tool wear or incorrect speed/feed settings. Keep backup tooling on hand for production runs exceeding 50 linear feet of edge profile.
Material Compatibility
The Outdoor Kitchen With Refrigerator Cutout - xl-12ft (Soapstone Finish) profile pairs best with medium-to-hard natural stones and engineered materials. Granite is the ideal substrate, offering the hardness needed to maintain the refrigerator geometry while accepting a brilliant polish. Quartz composites provide consistent results with minimal tool wear variation. For softer stones like marble or limestone, the profile remains achievable but requires adjusted CNC parameters and additional care during finishing. Exotic stones such as quartzite and super-white dolomite produce stunning results with this profile. Sintered stone panels are compatible when using specialized thin-material tooling. Always perform a test cut on representative material before beginning production runs.
Where to Buy
Professional fabricators can source granite slabs from local stone distributors and wholesale suppliers. Visit SlabWise for template downloads and fabrication resources.