Faucet Single Hole + Soap Dispenser (8x4 card)
Description
This precision DXF template provides the exact hole pattern for installing a single-handle kitchen faucet alongside a soap dispenser with standard 8-inch center-to-center spacing. Designed for professional stone fabricators, this template ensures accurate hole placement for granite, quartz, marble, and other solid surface countertops. The 8-inch spacing configuration is one of the most popular layouts in modern kitchen design, providing optimal functionality and aesthetic balance.
Related Templates
Answer summary
What is the Faucet Single Hole + Soap Dispenser (8x4 card) DXF template for?
Faucet Single Hole + Soap Dispenser (8x4 card) is a faucet & fixture holes DXF template for countertop fabrication. Use it only after matching the manufacturer, model, dimensions, variant, and shop workflow to the actual job.
Risk check: Similar-looking products can use different cutout geometry. Confirm the official spec, shop tolerance, material behavior, and CNC output before production.
Next step: Run a DXF check, compare related templates, and keep the current manufacturer spec with the job packet.
Template decision guide
Should you use the Faucet Single Hole + Soap Dispenser (8x4 card) DXF template?
Use the template page to shortlist a production file, then verify the exact model, variant, and machine workflow before cutting.
Best fit
Faucet Single Hole + Soap Dispenser (8x4 card) is most useful when the product, manufacturer, model, install type, and variant match the job you are fabricating.
What to compare
Compare model number, dimensions, reveal or overhang, bowl or appliance geometry, material thickness, and CNC output requirements.
Risk check
Do not use a similar-looking template as a final production file. Small changes in flange, radius, trim, or reveal can cause a failed cutout.
Evidence to verify
Check the current manufacturer spec, field measurement, template preview, DXF layers, and a shop-approved tolerance before production.
Page-specific notes
Page-specific notes for Faucet Single Hole + Soap Dispenser (8x4 card)
These notes are assembled from this exact template record, its category, available variants, and nearby template comparisons. They are meant to make the page more useful than a generic download page.
Exact record SlabWise is using
Faucet Single Hole + Soap Dispenser (8x4 card) is filed under Faucet & Fixture Holes. The normalized record lists no normalized dimensions are listed in the template record, so the safest use is as a production starting point that still gets checked against the current job packet.
Variant choice
This record is shown as a single template variant. Treat that as a reason to verify reveal, overhang, and cutout assumptions before the file reaches production.
Category-specific production check
Faucet & Fixture Holes files should be checked for fit against material thickness, edge treatment, sink or appliance clearance, CNC layer expectations, and the shop's preferred tolerance before cutting customer material.
Closest comparisons
Before choosing this file, compare it with Faucet 3-Hole 4in Center (10x4 card), Faucet 3-Hole 4in Center (12x4 card), Faucet 3-Hole 4in Center (14x4 card) to catch small model, radius, flange, or layout differences that can change the final cut.
Evidence already attached
This page has extra enrichment for installation overview, CNC cutting notes, material compatibility, buying context. Use those notes as decision support, then keep the official product spec with the job.
This precision DXF template provides the exact hole pattern for installing a single-handle kitchen faucet alongside a soap dispenser with standard 8-inch center-to-center spacing. Designed for professional stone fabricators, this template ensures accurate hole placement for granite, quartz, marble, and other solid surface countertops. The 8-inch spacing configuration is one of the most popular layouts in modern kitchen design, providing optimal functionality and aesthetic balance.
Installation Overview
The single-hole faucet with soap dispenser template features two precisely positioned 1.375-inch diameter holes spaced 8 inches apart center-to-center. This spacing standard has been established by major faucet manufacturers and provides comfortable reach between the faucet and soap dispenser without crowding. The template is ideal for undermount sink installations where hole placement must be determined before the sink is installed. For fabricators, this template eliminates measurement errors and ensures consistent results across multiple installations. The 8-inch spacing works particularly well with 33-inch and larger single-bowl sinks, allowing adequate clearance on both sides of the faucet. When positioning this template, center it on the sink or offset it slightly to the left to accommodate right-handed users who typically operate the faucet with their dominant hand while the soap dispenser remains easily accessible.
CNC Cutting Notes
Program your CNC machine for two 1.375-inch diameter through-holes with 8-inch center spacing along the X-axis. Use diamond-grit hole saws or core bits rated for the specific material being cut. For granite and quartzite, maintain spindle speeds between 800-1200 RPM with constant water cooling to prevent thermal cracking. The template geometry is optimized for efficient tool path routing, minimizing machine time while ensuring clean edge quality. Pre-mark hole locations and verify material thickness before cutting, as countertops exceeding 3cm may require specialized longer cutting bits. Always perform test cuts on scrap material when working with exotic or heavily patterned stone to ensure optimal hole placement within the vein structure.
Material Compatibility
This template is universally compatible with all natural stone and engineered surfaces including granite, marble, quartzite, soapstone, quartz (Caesarstone, Silestone, Cambria), solid surface (Corian, Staron), and ultra-compact surfaces (Dekton, Neolith). The 1.375-inch hole diameter accommodates standard plumbing fixtures from all major manufacturers including Delta, Moen, Kohler, Pfister, American Standard, and Grohe. The template works equally well with 2cm and 3cm thick materials, though hole reinforcement may be recommended for 2cm installations in high-stress areas. For fragile materials like marble or heavily veined quartzite, consider applying reinforcing mesh to the underside before cutting to prevent stress fractures during installation.
Where to Buy
This DXF template is available for immediate download through the Slabwise template library. Professional stone fabricators can access this template as part of their subscription or purchase it individually for use with any CAD/CAM system including BACA Systems, Intermac, Park Industries, and other industry-standard CNC controllers. The template includes both metric and imperial dimensions for international compatibility.