Pot Filler with 18in Swing Clearance
Description
This precision DXF template provides the exact hole pattern and clearance zone for wall-mounted pot filler faucets with 18-inch swing radius. Designed for professional stone fabricators working with granite, quartz, marble, and other natural or engineered stone surfaces. The template features a standard 1.5-inch diameter mounting hole with an 18-inch swing clearance arc, ensuring proper fit for popular models from Chicago Faucets, Delta, Kraus, and other major manufacturers. Perfect for kitchen installations requiring extended reach over cooktops and ranges.
Related Templates
Answer summary
What is the Pot Filler with 18in Swing Clearance DXF template for?
Pot Filler with 18in Swing Clearance is a faucet & fixture holes DXF template for countertop fabrication. Use it only after matching the manufacturer, model, dimensions, variant, and shop workflow to the actual job.
Risk check: Similar-looking products can use different cutout geometry. Confirm the official spec, shop tolerance, material behavior, and CNC output before production.
Next step: Run a DXF check, compare related templates, and keep the current manufacturer spec with the job packet.
Template decision guide
Should you use the Pot Filler with 18in Swing Clearance DXF template?
Use the template page to shortlist a production file, then verify the exact model, variant, and machine workflow before cutting.
Best fit
Pot Filler with 18in Swing Clearance is most useful when the product, manufacturer, model, install type, and variant match the job you are fabricating.
What to compare
Compare model number, dimensions, reveal or overhang, bowl or appliance geometry, material thickness, and CNC output requirements.
Risk check
Do not use a similar-looking template as a final production file. Small changes in flange, radius, trim, or reveal can cause a failed cutout.
Evidence to verify
Check the current manufacturer spec, field measurement, template preview, DXF layers, and a shop-approved tolerance before production.
Page-specific notes
Page-specific notes for Pot Filler with 18in Swing Clearance
These notes are assembled from this exact template record, its category, available variants, and nearby template comparisons. They are meant to make the page more useful than a generic download page.
Exact record SlabWise is using
Pot Filler with 18in Swing Clearance is filed under Faucet & Fixture Holes. The normalized record lists no normalized dimensions are listed in the template record, so the safest use is as a production starting point that still gets checked against the current job packet.
Variant choice
This record is shown as a single template variant. Treat that as a reason to verify reveal, overhang, and cutout assumptions before the file reaches production.
Category-specific production check
Faucet & Fixture Holes files should be checked for fit against material thickness, edge treatment, sink or appliance clearance, CNC layer expectations, and the shop's preferred tolerance before cutting customer material.
Closest comparisons
Before choosing this file, compare it with Faucet 3-Hole 4in Center (10x4 card), Faucet 3-Hole 4in Center (12x4 card), Faucet 3-Hole 4in Center (14x4 card) to catch small model, radius, flange, or layout differences that can change the final cut.
Evidence already attached
This page has extra enrichment for installation overview, CNC cutting notes, material compatibility, buying context. Use those notes as decision support, then keep the official product spec with the job.
This precision DXF template provides the exact hole pattern and clearance zone for wall-mounted pot filler faucets with 18-inch swing radius. Designed for professional stone fabricators working with granite, quartz, marble, and other natural or engineered stone surfaces. The template features a standard 1.5-inch diameter mounting hole with an 18-inch swing clearance arc, ensuring proper fit for popular models from Chicago Faucets, Delta, Kraus, and other major manufacturers. Perfect for kitchen installations requiring extended reach over cooktops and ranges.
Installation Overview
Installing a wall-mount pot filler requires precise coordination between the stone fabricator, plumber, and installer. This template marks the critical clearance zone that must remain free of obstructions to allow the pot filler's articulating arm to swing freely across the full 18-inch radius. The single 1.5-inch hole accommodates the supply valve and mounting hardware for most standard pot fillers. Position the template 12-18 inches above the finished cooktop surface, typically 15 inches for optimal pot clearance. The clearance arc shows the swept area when the dual-jointed spout extends and rotates, helping fabricators avoid conflicts with backsplash features, outlets, or adjacent cabinetry. For installations over professional ranges or large cooktops, verify that the 18-inch reach provides adequate coverage across all burners. Most 18-inch models can service a 4-6 burner range when properly centered. The template works with various stone thicknesses from 2cm to 3cm, though hole depth should be verified with your specific faucet model's rough-in valve requirements.
CNC Cutting Notes
Program your CNC machine to cut a clean 1.5-inch diameter hole using a diamond core bit suitable for your stone material. For granite and quartz, use a 1-1/2 inch diameter core bit at 2000-3000 RPM with continuous water cooling to prevent thermal cracking. The hole should be perpendicular to the surface with smooth edges to ensure proper valve seating and seal integrity. When cutting near the backsplash edge, maintain at least 2 inches of clearance from the back edge to prevent chipping. The 18-inch clearance arc shown in the DXF is for layout reference only - do not cut this arc into the stone. Use it to verify adequate space for the swing path during template positioning. For undermount sinks or cooktop installations, verify the hole position relative to other cutouts before cutting. Some fabricators prefer to mark the clearance zone with temporary tape during installation to help plumbers visualize the swing path.
Material Compatibility
This pot filler template works with all common countertop materials including granite, quartz, quartzite, marble, soapstone, and engineered surfaces. The 1.5-inch hole diameter is suitable for stone thicknesses of 2cm (3/4 inch) and 3cm (1-1/4 inch), which are industry standard for kitchen applications. For ultra-compact surfaces like Dekton or Neolith, use specialized cutting tools rated for sintered stone to prevent edge chipping. Marble and softer stones may require slower feed rates and additional edge support during drilling to prevent spalling around the hole perimeter. When working with exotic materials like semi-precious stone or backlit onyx, consult with your faucet manufacturer about specific rough-in requirements as some decorative installations may need custom mounting solutions. The template's clearance zone is especially important for patterned materials like bookmatched marble or dramatic veining - position the hole to optimize visual flow while maintaining functional clearance.
Where to Buy
This DXF template is available for immediate download through Slabwise. Compatible pot filler faucets are available from major plumbing distributors and manufacturers including Chicago Faucets, Delta, Kraus, Newport Brass, Waterstone, and Kingston Brass. For the faucet hardware itself, consult with local plumbing supply houses or kitchen showrooms. Professional fabrication shops can use this template with any CAD/CAM system that imports DXF files, including BACA Systems, Park Industries SawJet, and Intermac CNC machines.