Kohler Simplice Pull-Down
Kohler Simplice Pull-Down
Description
The Kohler Simplice pull-down kitchen faucet (model K-596) is one of the most popular single-hole kitchen faucets among homeowners and designers, featuring a sleek high-arc spout, pull-down spray head with DockNetik magnetic docking, and three-function spray technology. For countertop fabricators, this template provides the exact hole dimensions and positioning required for flawless installation of this professional-grade kitchen faucet. Whether you're working with granite, quartz, marble, or solid surface materials, this precision DXF template ensures accurate CNC cutting for the 1.375-inch diameter faucet hole, eliminating measurement errors and reducing fabrication time. The Simplice line is available in both single-hole and three-hole configurations, with this template accommodating the standard single-hole installation that works with the included deck plate.
Dimensions
Specifications
- Manufacturer
- kohler
- Downloads
- 0
Related Templates
Answer summary
What is the Kohler Simplice Pull-Down DXF template for?
Kohler Simplice Pull-Down is a faucet & fixture holes DXF template for countertop fabrication. Use it only after matching the manufacturer, model, dimensions, variant, and shop workflow to the actual job.
Risk check: Similar-looking products can use different cutout geometry. Confirm the official spec, shop tolerance, material behavior, and CNC output before production.
Next step: Run a DXF check, compare related templates, and keep the current manufacturer spec with the job packet.
Template decision guide
Should you use the Kohler Simplice Pull-Down DXF template?
Use the template page to shortlist a production file, then verify the exact model, variant, and machine workflow before cutting.
Best fit
Kohler Simplice Pull-Down is most useful when the product, manufacturer, model, install type, and variant match the job you are fabricating.
What to compare
Compare model number, dimensions, reveal or overhang, bowl or appliance geometry, material thickness, and CNC output requirements.
Risk check
Do not use a similar-looking template as a final production file. Small changes in flange, radius, trim, or reveal can cause a failed cutout.
Evidence to verify
Check the current manufacturer spec, field measurement, template preview, DXF layers, and a shop-approved tolerance before production.
Page-specific notes
Page-specific notes for Kohler Simplice Pull-Down
These notes are assembled from this exact template record, its category, available variants, and nearby template comparisons. They are meant to make the page more useful than a generic download page.
Exact record SlabWise is using
kohler is filed under Faucet & Fixture Holes. The normalized record lists no normalized dimensions are listed in the template record, so the safest use is as a production starting point that still gets checked against the current job packet.
Variant choice
This record is shown as a single template variant. Treat that as a reason to verify reveal, overhang, and cutout assumptions before the file reaches production.
Category-specific production check
Faucet & Fixture Holes files should be checked for fit against material thickness, edge treatment, sink or appliance clearance, CNC layer expectations, and the shop's preferred tolerance before cutting customer material.
Closest comparisons
Before choosing this file, compare it with Kohler 4in Centerset, Kohler Artifacts Bridge, Kohler Bar Faucet Single Hole to catch small model, radius, flange, or layout differences that can change the final cut.
Evidence already attached
This page has extra enrichment for installation overview, CNC cutting notes, material compatibility, buying context. Use those notes as decision support, then keep the official product spec with the job.
The Kohler Simplice pull-down kitchen faucet (model K-596) is one of the most popular single-hole kitchen faucets among homeowners and designers, featuring a sleek high-arc spout, pull-down spray head with DockNetik magnetic docking, and three-function spray technology. For countertop fabricators, this template provides the exact hole dimensions and positioning required for flawless installation of this professional-grade kitchen faucet. Whether you're working with granite, quartz, marble, or solid surface materials, this precision DXF template ensures accurate CNC cutting for the 1.375-inch diameter faucet hole, eliminating measurement errors and reducing fabrication time. The Simplice line is available in both single-hole and three-hole configurations, with this template accommodating the standard single-hole installation that works with the included deck plate.
Installation Overview
Installing the Kohler Simplice pull-down faucet requires a single precision-drilled hole with a diameter of 1.375 inches (1-5/16 inches maximum per Kohler specifications). The faucet can be installed on countertops with a maximum deck thickness of 2.5 inches and requires a minimum clearance above the deck for the 16-5/8 inch overall height and 9-5/8 inch spout height. The spout reach extends 9 inches from the center of the faucet body, making it ideal for large undermount sinks. During installation, fabricators should position the faucet hole based on the sink template, typically centering it 2-4 inches behind the sink cutout. The template includes mounting hole placement that accommodates the base plate diameter and ensures proper alignment with water supply lines. For three-hole installations using the wider escutcheon, additional holes at 8-inch centers may be required, though the primary faucet connection remains a single 1.375-inch bore.
CNC Cutting Notes
When programming your CNC machine for Kohler Simplice faucet holes, use a diamond core drill bit specifically designed for the material you're cutting. For granite and quartz countertops, maintain constant water flow to the cutting surface to prevent thermal shock and extend tool life. Set your feed rate conservatively—rushing the cut can cause chipping around the hole perimeter, especially with brittle materials like quartz. A typical CNC bridge saw completes a faucet hole in 15-25 minutes, compared to 1-2 hours for manual drilling. For best results, use a two-pass approach: a roughing pass at 80% of the final diameter, followed by a finishing pass to achieve the precise 1.375-inch dimension with smooth edges. Ensure your machine is properly calibrated and the slab is secured with adequate vacuum hold-down pressure. The DXF template is drawn to exact specifications with the hole center at coordinates (0,0), making it simple to position relative to your sink cutout and edge profiles. After cutting, inspect the hole for any micro-cracks or chips, and use a diamond hand pad to smooth any minor imperfections before the homeowner's final installation.
Material Compatibility
This Kohler Simplice faucet hole template is compatible with all common countertop materials including granite, engineered quartz (Caesarstone, Silestone, Cambria), marble, quartzite, soapstone, and solid surface materials (Corian, Hi-Macs). The standard 1.375-inch hole diameter works universally across these materials, though cutting techniques vary. Granite and natural stone can be cut with standard diamond core bits, while engineered quartz requires specialized tooling due to its extreme hardness (Mohs 7). For delicate materials like marble, reduce feed rates and ensure ample cooling water to prevent thermal cracking. Solid surface materials like Corian can be cut with carbide or diamond bits at higher speeds. The faucet's included rubber gasket and mounting hardware provide a watertight seal on all materials when properly installed. Fabricators should note that the maximum deck thickness of 2.5 inches accommodates most residential countertop installations, including standard 3cm slabs with laminated edges or built-up profiles. For ultra-thick applications exceeding 2.5 inches, consult with the plumber about using faucet extension kits or alternative mounting solutions.
Where to Buy
Kohler Simplice faucets are widely available through multiple channels convenient for both fabricators and homeowners. Major home improvement retailers including The Home Depot and Lowe's stock the K-596 series in popular finishes like vibrant stainless, polished chrome, and matte black, often with same-day pickup options. For professional fabricators and plumbers, Ferguson and other wholesale plumbing distributors offer competitive pricing, bulk availability, and dedicated support for commercial projects. Online retailers like FaucetDirect.com, Amazon, and Build.com provide the full range of Simplice models with detailed specifications and customer reviews. For hands-on selection, visit Kohler Experience Centers and Kohler Signature Store locations where you can see the faucet installed in working kitchen displays. Fabricators coordinating with designers should direct clients to local authorized Kohler dealers for finish matching and warranty registration. The K-596 typically retails between $200-$400 depending on finish, with occasional promotions available through major retailers. When purchasing, verify the model number to ensure compatibility with this single-hole template—the K-596 is the single/three-hole version, while other Simplice models may have different configurations.