Hansgrohe Widespread 8in
Hansgrohe Widespread 8in
Description
The Hansgrohe 8-Inch Widespread faucet template delivers precision three-hole patterns specifically designed for Hansgrohe's widespread bathroom faucet collections including Metris, Metropol, and Locarno series. Widespread faucets feature separate hot and cold handles with a center spout, offering both functional versatility and elegant aesthetics for bathroom vanity installations. This template specifies three 1.375-inch diameter holes with standard 8-inch spacing measured from the center of the left handle hole to the center of the right handle hole, with the spout centered between them. The 8-inch widespread configuration is the most common spacing for bathroom faucets, providing comfortable handle operation while maintaining a compact footprint suitable for standard bathroom vanity widths. This DXF template is engineered for professional countertop fabricators working with granite, marble, quartz, and solid surface materials, with precise dimensions that ensure proper alignment of all three components for seamless installation.
Dimensions
Specifications
- Manufacturer
- hansgrohe
- Downloads
- 0
Related Templates
Answer summary
What is the Hansgrohe Widespread 8in DXF template for?
Hansgrohe Widespread 8in is a faucet & fixture holes DXF template for countertop fabrication. Use it only after matching the manufacturer, model, dimensions, variant, and shop workflow to the actual job.
Risk check: Similar-looking products can use different cutout geometry. Confirm the official spec, shop tolerance, material behavior, and CNC output before production.
Next step: Run a DXF check, compare related templates, and keep the current manufacturer spec with the job packet.
Template decision guide
Should you use the Hansgrohe Widespread 8in DXF template?
Use the template page to shortlist a production file, then verify the exact model, variant, and machine workflow before cutting.
Best fit
Hansgrohe Widespread 8in is most useful when the product, manufacturer, model, install type, and variant match the job you are fabricating.
What to compare
Compare model number, dimensions, reveal or overhang, bowl or appliance geometry, material thickness, and CNC output requirements.
Risk check
Do not use a similar-looking template as a final production file. Small changes in flange, radius, trim, or reveal can cause a failed cutout.
Evidence to verify
Check the current manufacturer spec, field measurement, template preview, DXF layers, and a shop-approved tolerance before production.
Page-specific notes
Page-specific notes for Hansgrohe Widespread 8in
These notes are assembled from this exact template record, its category, available variants, and nearby template comparisons. They are meant to make the page more useful than a generic download page.
Exact record SlabWise is using
hansgrohe is filed under Faucet & Fixture Holes. The normalized record lists no normalized dimensions are listed in the template record, so the safest use is as a production starting point that still gets checked against the current job packet.
Variant choice
This record is shown as a single template variant. Treat that as a reason to verify reveal, overhang, and cutout assumptions before the file reaches production.
Category-specific production check
Faucet & Fixture Holes files should be checked for fit against material thickness, edge treatment, sink or appliance clearance, CNC layer expectations, and the shop's preferred tolerance before cutting customer material.
Closest comparisons
Before choosing this file, compare it with Hansgrohe Aquno Select, Hansgrohe Cento Pull-Down, Hansgrohe Focus Single to catch small model, radius, flange, or layout differences that can change the final cut.
Evidence already attached
This page has extra enrichment for installation overview, CNC cutting notes, material compatibility, buying context. Use those notes as decision support, then keep the official product spec with the job.
The Hansgrohe 8-Inch Widespread faucet template delivers precision three-hole patterns specifically designed for Hansgrohe's widespread bathroom faucet collections including Metris, Metropol, and Locarno series. Widespread faucets feature separate hot and cold handles with a center spout, offering both functional versatility and elegant aesthetics for bathroom vanity installations. This template specifies three 1.375-inch diameter holes with standard 8-inch spacing measured from the center of the left handle hole to the center of the right handle hole, with the spout centered between them. The 8-inch widespread configuration is the most common spacing for bathroom faucets, providing comfortable handle operation while maintaining a compact footprint suitable for standard bathroom vanity widths. This DXF template is engineered for professional countertop fabricators working with granite, marble, quartz, and solid surface materials, with precise dimensions that ensure proper alignment of all three components for seamless installation.
Installation Overview
Installing a Hansgrohe 8-inch widespread faucet requires precise placement and alignment of three separate holes in the vanity countertop. The configuration includes a center spout hole and two handle holes positioned 4 inches to the left and right of center, creating the standard 8-inch spacing. Each hole is 1.375 inches in diameter to accommodate the faucet components and their mounting hardware. When templating, position the center hole 2-3 inches behind the sink's back edge for undermount installations, ensuring the spout will deliver water to the sink center. For vessel sinks, adjust positioning based on sink height and spout reach. The three-hole alignment must be perfectly straight - any angular deviation will be immediately visible when the faucet is installed, potentially preventing proper assembly. Use a laser level or precision marking tools to ensure all three holes are on the same horizontal plane. Under-vanity clearance requirements are similar to single-hole installations, but verify adequate space for three sets of supply lines plus the interconnecting tubes that link the handles to the spout valve body. Maximum deck thickness is typically 1.5 inches for most Hansgrohe widespread models, though some configurations accept up to 2 inches with extended mounting hardware.
CNC Cutting Notes
Programming CNC toolpaths for widespread faucet patterns requires precision and careful sequencing to ensure perfect hole alignment. Begin by establishing a clear origin point and verify your coordinate system places holes at exactly [-4, 0], [0, 0], and [4, 0] relative to the center reference. Use a helical boring operation for each hole, with identical parameters across all three to ensure consistent hole quality. Diamond core bits with continuous rim design produce the cleanest holes in granite, marble, and quartz. Set spindle speed to 3500-4500 RPM with feed rates of 25-35 IPM, adjusting for material hardness. Each hole should be cut with the same toolpath to ensure uniform diameter and edge quality - any variation between holes will be apparent during faucet installation. For bathroom vanity tops, which often feature book-matched patterns or prominent veining, position the hole pattern to avoid cutting through structural weaknesses or aesthetically important vein patterns. Program adequate clearance moves between holes to prevent tool drag across the finished surface. Apply continuous water cooling throughout the cutting process to prevent thermal stress that could cause micro-cracking between closely spaced holes. After CNC cutting, inspect all three holes to verify they're precisely aligned using a straightedge - any misalignment should be addressed before the countertop leaves the shop. Polish all hole edges with progressive diamond pads (120, 220, 400 grit) for professional finish quality.
Material Compatibility
The Hansgrohe 8-inch widespread template is compatible with all bathroom vanity countertop materials, though cutting three precisely aligned holes requires careful technique regardless of material type. Natural marble, frequently used in luxury bathroom applications, cuts beautifully with this hole pattern when using proper diamond tooling and water cooling. The softer composition of marble compared to granite makes it more forgiving for drilling operations, though care must be taken near prominent veining to prevent chipping. Granite vanity tops in classic colors like Absolute Black, Uba Tuba, and Venetian Gold provide excellent structural integrity for widespread faucet installations, with the 8-inch spacing distributing stress across a stable area. Engineered quartz has become increasingly popular for bathroom vanities due to its non-porous properties, and it machines precisely with sharp diamond tooling and appropriate cutting speeds. The resin content in quartz requires water cooling to prevent thermal damage during cutting. Solid surface materials like Corian offer unique advantages for widespread installations - holes can be cut with carbide or diamond bits, and any future modification is possible by filling and re-drilling if needed. For exotic materials like quartzite, onyx, or semi-precious stone slabs used in high-end bathroom projects, the three-hole pattern requires extra care due to material brittleness and value. The widespread configuration's elegant appearance complements premium materials, making it a popular choice for luxury bathroom renovations.
Where to Buy
Hansgrohe 8-inch widespread bathroom faucets are available through professional plumbing distributors, authorized kitchen and bath showrooms, and online retailers specializing in premium bath fixtures. Fabricators and contractors can source Hansgrohe widespread models through Ferguson, which maintains extensive inventory across their nationwide locations. Other wholesale distributors including Hajoca Corporation, F.W. Webb Company, and Morrison Supply provide contractor pricing and access to technical specifications and installation documentation. For retail purchases, The Home Depot carries select Hansgrohe widespread models including the popular Metris 8-inch configuration (model 31083001), though the full range of finishes and styles may require special order. Specialized kitchen and bath showrooms offer comprehensive Hansgrohe widespread collections with expert design consultation, which is valuable for high-end residential projects where fixture selection significantly impacts overall aesthetic. Online retailers including Build.com, FaucetDirect, QualityBath, and eFaucets.com stock multiple Hansgrohe 8-inch widespread configurations with detailed specifications, installation videos, and customer reviews. The widespread format is available in numerous Hansgrohe collections including Metris, Metropol, Locarno, Talis, and Axor designer lines, with finishes ranging from Chrome and Brushed Nickel to Matte Black and special PVD finishes. When specifying for client projects, confirm the exact model number and finish, as lead times can vary significantly for special-order configurations. Purchase through authorized Hansgrohe dealers to ensure warranty coverage and access to technical support.