Hansgrohe Talis S Single
Hansgrohe Talis S Single
Description
The Hansgrohe Talis S Single faucet template provides countertop fabricators with precise hole patterns for one of Hansgrohe's most popular bathroom faucet collections. The Talis S line represents minimalist German design with its clean lines and cylindrical form, making it a favorite for contemporary bathroom renovations and new construction projects. This single-hole configuration requires a standard 1.375-inch diameter mounting hole, suitable for bathroom vanity countertops in granite, marble, quartz, and solid surface materials. The template is optimized for CNC router operations and can be imported into all major CAD/CAM software platforms including AutoCAD, SolidWorks, AlphaCAM, and VCarve Pro. Fabricators working on high-end residential and commercial bathroom projects will find this template essential for accurate Talis S installations, ensuring proper fit of the mounting hardware and eliminating costly callbacks due to misaligned or incorrectly sized holes.
Dimensions
Specifications
- Manufacturer
- hansgrohe
- Downloads
- 0
Related Templates
Answer summary
What is the Hansgrohe Talis S Single DXF template for?
Hansgrohe Talis S Single is a faucet & fixture holes DXF template for countertop fabrication. Use it only after matching the manufacturer, model, dimensions, variant, and shop workflow to the actual job.
Risk check: Similar-looking products can use different cutout geometry. Confirm the official spec, shop tolerance, material behavior, and CNC output before production.
Next step: Run a DXF check, compare related templates, and keep the current manufacturer spec with the job packet.
Template decision guide
Should you use the Hansgrohe Talis S Single DXF template?
Use the template page to shortlist a production file, then verify the exact model, variant, and machine workflow before cutting.
Best fit
Hansgrohe Talis S Single is most useful when the product, manufacturer, model, install type, and variant match the job you are fabricating.
What to compare
Compare model number, dimensions, reveal or overhang, bowl or appliance geometry, material thickness, and CNC output requirements.
Risk check
Do not use a similar-looking template as a final production file. Small changes in flange, radius, trim, or reveal can cause a failed cutout.
Evidence to verify
Check the current manufacturer spec, field measurement, template preview, DXF layers, and a shop-approved tolerance before production.
Page-specific notes
Page-specific notes for Hansgrohe Talis S Single
These notes are assembled from this exact template record, its category, available variants, and nearby template comparisons. They are meant to make the page more useful than a generic download page.
Exact record SlabWise is using
hansgrohe is filed under Faucet & Fixture Holes. The normalized record lists no normalized dimensions are listed in the template record, so the safest use is as a production starting point that still gets checked against the current job packet.
Variant choice
This record is shown as a single template variant. Treat that as a reason to verify reveal, overhang, and cutout assumptions before the file reaches production.
Category-specific production check
Faucet & Fixture Holes files should be checked for fit against material thickness, edge treatment, sink or appliance clearance, CNC layer expectations, and the shop's preferred tolerance before cutting customer material.
Closest comparisons
Before choosing this file, compare it with Hansgrohe Aquno Select, Hansgrohe Cento Pull-Down, Hansgrohe Focus Single to catch small model, radius, flange, or layout differences that can change the final cut.
Evidence already attached
This page has extra enrichment for installation overview, CNC cutting notes, material compatibility, buying context. Use those notes as decision support, then keep the official product spec with the job.
The Hansgrohe Talis S Single faucet template provides countertop fabricators with precise hole patterns for one of Hansgrohe's most popular bathroom faucet collections. The Talis S line represents minimalist German design with its clean lines and cylindrical form, making it a favorite for contemporary bathroom renovations and new construction projects. This single-hole configuration requires a standard 1.375-inch diameter mounting hole, suitable for bathroom vanity countertops in granite, marble, quartz, and solid surface materials. The template is optimized for CNC router operations and can be imported into all major CAD/CAM software platforms including AutoCAD, SolidWorks, AlphaCAM, and VCarve Pro. Fabricators working on high-end residential and commercial bathroom projects will find this template essential for accurate Talis S installations, ensuring proper fit of the mounting hardware and eliminating costly callbacks due to misaligned or incorrectly sized holes.
Installation Overview
Installing the Hansgrohe Talis S Single faucet begins with precise hole placement in the bathroom vanity countertop. The standard mounting hole diameter is 1.375 inches, which accommodates the faucet body, mounting nut, and flexible supply line connections. Position the faucet hole based on the sink configuration - for undermount sinks, place the hole 2-3 inches behind the sink's back edge and centered on the sink width for aesthetic balance. For vessel sinks, positioning may vary based on sink height and spout reach; verify that the spout will deliver water to the center of the vessel without splashing. The Talis S Single line includes various heights from 80mm to 190mm, so confirm the specific model's spout reach before finalizing hole placement. Ensure adequate under-vanity clearance (minimum 10 inches) for supply line connections and P-trap installation. Maximum deck thickness for most Talis S Single models is 1.5 inches, though the mounting hardware can accommodate slightly thicker materials. The faucet includes QuickClean technology and EcoRight water-saving features, but these don't affect the mounting hole requirements.
CNC Cutting Notes
For precision cutting of Talis S faucet holes in vanity countertops, program your CNC with a helical boring toolpath to minimize stress on the material. Use a diamond core bit rated for the specific material - natural stone requires sintered diamond bits while engineered quartz benefits from electroplated diamond tooling with fine grit. Set spindle speed to 3500-4500 RPM for most bathroom countertop materials, with feed rates of 25-35 inches per minute. Bathroom vanity tops often use more exotic materials than kitchens, including book-matched marble and highly figured granite, so adjust parameters for material hardness and brittleness. Maintain continuous water flow to the cutting area to prevent thermal cracking and extend bit life. The 1.375-inch hole diameter leaves minimal margin for error, so verify CNC calibration before cutting into finished materials. For manual cutting operations, use a diamond hole saw with pilot bit, ensuring the pilot hole is precisely centered at the marked faucet location. Support the material from below with a backer board to prevent breakthrough chipping. After cutting, polish the hole edges with progressive diamond pads (120, 220, 400 grit) to create smooth surfaces that won't damage supply lines or interfere with the mounting assembly. In white or light-colored materials, any edge imperfections will be highly visible, so take extra care with finishing.
Material Compatibility
The Hansgrohe Talis S Single template works seamlessly across all bathroom vanity countertop materials. Natural marble is particularly popular for bathroom applications, and the 1.375-inch hole cuts cleanly with proper diamond tooling and water cooling. Marble's softer composition compared to granite allows slightly faster feed rates but requires careful handling to prevent chipping on delicate veining. Granite vanity tops, especially in premium varieties like Ubatuba, Absolute Black, and Kashmir White, cut predictably with this hole size using standard diamond core bits. Engineered quartz has gained popularity in bathroom applications for its non-porous properties and low maintenance, and it machines well with the Talis S hole pattern when using sharp diamond tooling at appropriate speeds. Solid surface materials like Corian and Hi-Macs offer seamless integration possibilities, and the mounting hole can be cut with carbide or diamond bits with excellent edge quality. For unique materials like quartzite, onyx, or semi-precious stone slabs increasingly used in luxury bathrooms, adjust cutting parameters for the specific material properties - these exotic stones often require slower speeds and more frequent tool coolant to prevent damage. The Talis S Single's minimalist design aesthetic pairs beautifully with any material choice, from classic Carrara marble to contemporary concrete-look quartz.
Where to Buy
Hansgrohe Talis S Single bathroom faucets are widely available through plumbing distributors, kitchen and bath showrooms, and online retailers specializing in premium fixtures. Professional fabricators and contractors can purchase through Ferguson locations nationwide, which stock multiple Talis S configurations and finishes. Other wholesale distributors including Hajoca, F.W. Webb, and Morrison Supply provide access to the full Talis S line with contractor pricing and technical support. For retail purchases, select Home Depot locations carry Talis S models, though the full range of heights and finishes may require special order. Specialized kitchen and bath showrooms offer the complete Talis S collection along with expert specification assistance, which is valuable when coordinating fixtures for comprehensive bathroom remodels. Online retailers including Build.com, FaucetDirect, QualityBath, and eFaucets.com stock Talis S Single faucets with detailed specifications and customer reviews. The Talis S line is available in multiple finishes including Chrome (polished and matte), Brushed Nickel, and Matte Black, with finish pricing varying significantly. When specifying for client projects, order early to ensure finish availability and allow time for any special-order configurations. Purchase through authorized Hansgrohe dealers to ensure warranty coverage and access to technical support for installation questions.