Description
The Small Bevel (1/8") Edge Profile (Quartz (Engineered)) - 3cm+2cm Laminated profile delivers a refined aesthetic that enhances any countertop installation. With dimensions of standard dimensions, this edge template provides fabricators with precise CNC-ready geometry for consistent, repeatable cuts. Ideal for granite applications, this profile balances visual sophistication with structural integrity. Professional shops rely on standardized DXF templates like this to minimize setup time and reduce material waste during production runs. The small design works particularly well in commercial settings where clean lines and polished finishes are expected by discerning clients.
Related Templates
Eased/Straight Edge Profile (Granite) - 2cm+2cm Laminated
Eased/Straight Edge Profile (Marble) - 2cm+2cm Laminated
Eased/Straight Edge Profile (Porcelain) - 2cm+2cm Laminated
Eased/Straight Edge Profile (Quartz (Engineered)) - 2cm+2cm Laminated
The Small Bevel (1/8") Edge Profile (Quartz (Engineered)) - 3cm+2cm Laminated profile delivers a refined aesthetic that enhances any countertop installation. With dimensions of standard dimensions, this edge template provides fabricators with precise CNC-ready geometry for consistent, repeatable cuts. Ideal for granite applications, this profile balances visual sophistication with structural integrity. Professional shops rely on standardized DXF templates like this to minimize setup time and reduce material waste during production runs. The small design works particularly well in commercial settings where clean lines and polished finishes are expected by discerning clients.
Installation Overview
Fabricating the Small Bevel (1/8") Edge Profile (Quartz (Engineered)) - 3cm+2cm Laminated edge starts with proper slab preparation and CNC setup. Secure the countertop blank on the CNC table using vacuum pods or mechanical clamps, ensuring the edge to be profiled extends beyond the table edge sufficiently. Load the DXF template into your CAM software and set the appropriate tool offsets for your specific edge profiling bits. For the initial roughing pass on granite, use a feed rate of 40-60 inches per minute with a spindle speed of 4500-6000 RPM. The small profile geometry requires attention to bit selection, using profiling wheels that match the radius specifications in the template. After roughing, perform a semi-finish pass at 80% depth before the final profile cut. Water flow should be maintained at 2-3 gallons per minute minimum to prevent heat buildup. Hand polishing follows CNC work, progressing through 50, 100, 200, 400, 800, 1500, and 3000 grit pads. Buff with a felt pad and polishing compound for a mirror finish. Seal with an impregnating sealer designed for natural stone.
CNC Cutting Notes
For the Small Bevel (1/8") Edge Profile (Quartz (Engineered)) - 3cm+2cm Laminated profile, set your CNC router spindle speed between 5000-7000 RPM for granite substrates. Use a feed rate of 40-60 IPM for roughing passes and reduce to 20-30 IPM for finishing passes. Select a diamond-tipped profile bit matching the template radius specifications. Program the toolpath using climb milling for cleaner cuts on the small geometry. Maintain coolant flow at 2+ GPM to prevent thermal fracturing. For harder stones like granite, reduce feed rates by 20% and increase water flow. Run a test cut on scrap material to verify the profile matches the DXF template before committing to production stock.
Material Compatibility
The Small Bevel (1/8") Edge Profile (Quartz (Engineered)) - 3cm+2cm Laminated template works exceptionally well with natural granite, providing clean edges that polish to a high gloss. Marble is also compatible, though the softer stone requires reduced feed rates during CNC operations to prevent micro-chipping. Quartzite offers excellent results with this profile, as the hard mineral structure holds fine details well. Engineered quartz composites are ideal substrates, offering consistent material properties that produce predictable results. Soapstone and slate can be profiled using this template with appropriate tooling adjustments. For limestone, use conservative CNC parameters due to the stone's tendency to chip on detailed profiles. Porcelain sintered stone panels require specialized diamond tooling but produce excellent results with the small geometry.
Where to Buy
Professional fabricators can source granite slabs from local stone distributors and wholesale suppliers. Visit SlabWise for template downloads and fabrication resources.