Small Bevel (1/8") Edge Profile - 3cm
Description
Designed for professional stone fabrication, the Small Bevel (1/8") Edge Profile - 3cm template captures the exact geometry needed for flawless small edge profiles. The standard dimensions specifications align with industry-standard tooling and CNC equipment. This profile is particularly suited for engineered quartz countertops where precision matters. From initial roughing passes to final polish, having an accurate DXF template eliminates guesswork and ensures every piece matches. The small edge has proven popular in hospitality applications, delivering both durability and visual appeal that clients consistently request.
Related Templates
Eased/Straight Edge Profile (Granite) - 2cm+2cm Laminated
Eased/Straight Edge Profile (Marble) - 2cm+2cm Laminated
Eased/Straight Edge Profile (Porcelain) - 2cm+2cm Laminated
Eased/Straight Edge Profile (Quartz (Engineered)) - 2cm+2cm Laminated
Answer summary
What is the Small Bevel (1/8") Edge Profile - 3cm DXF template for?
Small Bevel (1/8") Edge Profile - 3cm is a edge profiles DXF template for countertop fabrication. Use it only after matching the manufacturer, model, dimensions, variant, and shop workflow to the actual job.
Risk check: Similar-looking products can use different cutout geometry. Confirm the official spec, shop tolerance, material behavior, and CNC output before production.
Next step: Run a DXF check, compare related templates, and keep the current manufacturer spec with the job packet.
Template decision guide
Should you use the Small Bevel (1/8") Edge Profile - 3cm DXF template?
Use the template page to shortlist a production file, then verify the exact model, variant, and machine workflow before cutting.
Best fit
Small Bevel (1/8") Edge Profile - 3cm is most useful when the product, manufacturer, model, install type, and variant match the job you are fabricating.
What to compare
Compare model number, dimensions, reveal or overhang, bowl or appliance geometry, material thickness, and CNC output requirements.
Risk check
Do not use a similar-looking template as a final production file. Small changes in flange, radius, trim, or reveal can cause a failed cutout.
Evidence to verify
Check the current manufacturer spec, field measurement, template preview, DXF layers, and a shop-approved tolerance before production.
Page-specific notes
Page-specific notes for Small Bevel (1/8") Edge Profile - 3cm
These notes are assembled from this exact template record, its category, available variants, and nearby template comparisons. They are meant to make the page more useful than a generic download page.
Exact record SlabWise is using
Small Bevel (1/8") Edge Profile - 3cm is filed under Edge Profiles. The normalized record lists profile height 1.181", profile depth 1.5", so the safest use is as a production starting point that still gets checked against the current job packet.
Variant choice
This record is shown as a single template variant. Treat that as a reason to verify reveal, overhang, and cutout assumptions before the file reaches production.
Category-specific production check
Edge Profiles files should be checked for fit against material thickness, edge treatment, sink or appliance clearance, CNC layer expectations, and the shop's preferred tolerance before cutting customer material.
Closest comparisons
Before choosing this file, compare it with Eased/Straight Edge Profile (Granite) - 2cm+2cm Laminated, Eased/Straight Edge Profile (Marble) - 2cm+2cm Laminated, Eased/Straight Edge Profile (Porcelain) - 2cm+2cm Laminated to catch small model, radius, flange, or layout differences that can change the final cut.
Evidence already attached
This page has extra enrichment for installation overview, CNC cutting notes, material compatibility, buying context. Use those notes as decision support, then keep the official product spec with the job.
Designed for professional stone fabrication, the Small Bevel (1/8") Edge Profile - 3cm template captures the exact geometry needed for flawless small edge profiles. The standard dimensions specifications align with industry-standard tooling and CNC equipment. This profile is particularly suited for engineered quartz countertops where precision matters. From initial roughing passes to final polish, having an accurate DXF template eliminates guesswork and ensures every piece matches. The small edge has proven popular in hospitality applications, delivering both durability and visual appeal that clients consistently request.
Installation Overview
Installing the Small Bevel (1/8") Edge Profile - 3cm edge profile requires careful preparation of the substrate edge before applying the profile. Begin by ensuring the countertop slab is cut to final dimensions with clean, squared edges. For engineered quartz substrates, use a diamond blade at reduced feed rates to prevent chipping. The edge profile should be roughed using a CNC router with the DXF template loaded as the toolpath guide. Start with a roughing pass at 60-70% depth using a coarse diamond bit, then follow with a finishing pass at full depth using a fine-grit profile wheel. Allow adequate water flow during cutting to prevent thermal stress fractures. After CNC shaping, hand-finish using progressive diamond polishing pads from 50 grit through 3000 grit. For the small profile specifically, pay attention to the transition zones where curves meet flat surfaces. Apply a stone sealer appropriate for engineered quartz once the edge is fully polished. Final inspection should verify the profile matches the DXF geometry within 1/32" tolerance.
CNC Cutting Notes
Optimal CNC settings for the Small Bevel (1/8") Edge Profile - 3cm template depend on the substrate material. For natural granite, use 4000-5500 RPM with 30-50 IPM feed. For quartz composites, increase to 5500-7000 RPM at 45-65 IPM. The small profile requires careful attention to entry and exit points on the toolpath to prevent edge chipping. Program multiple depth passes rather than a single full-depth cut. Coolant temperature should remain below 70°F for optimal diamond tool performance. Dress profiling wheels after every 20-30 linear feet of cutting to maintain profile accuracy.
Material Compatibility
The Small Bevel (1/8") Edge Profile - 3cm template works exceptionally well with natural granite, providing clean edges that polish to a high gloss. Marble is also compatible, though the softer stone requires reduced feed rates during CNC operations to prevent micro-chipping. Quartzite offers excellent results with this profile, as the hard mineral structure holds fine details well. Engineered quartz composites are ideal substrates, offering consistent material properties that produce predictable results. Soapstone and slate can be profiled using this template with appropriate tooling adjustments. For limestone, use conservative CNC parameters due to the stone's tendency to chip on detailed profiles. Porcelain sintered stone panels require specialized diamond tooling but produce excellent results with the small geometry.
Where to Buy
Professional fabricators can source engineered quartz slabs from local stone distributors and wholesale suppliers. Visit SlabWise for template downloads and fabrication resources.