Description
The Eased/Straight Edge Profile (Quartzite) - 2cm represents a precision-engineered edge profile template built for CNC fabrication workflows. Measuring standard dimensions, this DXF file provides the exact toolpath geometry that professional fabricators need. The eased profile is well-suited for marble installations, offering a clean transition that complements modern and traditional designs alike. Experienced fabricators know that starting with an accurate template is the foundation of quality work, and this profile delivers the consistency required for multi-piece installations in residential environments.
Related Templates
Eased/Straight Edge Profile (Granite) - 2cm+2cm Laminated
Eased/Straight Edge Profile (Marble) - 2cm+2cm Laminated
Eased/Straight Edge Profile (Porcelain) - 2cm+2cm Laminated
Eased/Straight Edge Profile (Quartz (Engineered)) - 2cm+2cm Laminated
The Eased/Straight Edge Profile (Quartzite) - 2cm represents a precision-engineered edge profile template built for CNC fabrication workflows. Measuring standard dimensions, this DXF file provides the exact toolpath geometry that professional fabricators need. The eased profile is well-suited for marble installations, offering a clean transition that complements modern and traditional designs alike. Experienced fabricators know that starting with an accurate template is the foundation of quality work, and this profile delivers the consistency required for multi-piece installations in residential environments.
Installation Overview
Installing the Eased/Straight Edge Profile (Quartzite) - 2cm edge profile requires careful preparation of the substrate edge before applying the profile. Begin by ensuring the countertop slab is cut to final dimensions with clean, squared edges. For marble substrates, use a diamond blade at reduced feed rates to prevent chipping. The edge profile should be roughed using a CNC router with the DXF template loaded as the toolpath guide. Start with a roughing pass at 60-70% depth using a coarse diamond bit, then follow with a finishing pass at full depth using a fine-grit profile wheel. Allow adequate water flow during cutting to prevent thermal stress fractures. After CNC shaping, hand-finish using progressive diamond polishing pads from 50 grit through 3000 grit. For the eased profile specifically, pay attention to the transition zones where curves meet flat surfaces. Apply a stone sealer appropriate for marble once the edge is fully polished. Final inspection should verify the profile matches the DXF geometry within 1/32" tolerance.
CNC Cutting Notes
Optimal CNC settings for the Eased/Straight Edge Profile (Quartzite) - 2cm template depend on the substrate material. For natural granite, use 4000-5500 RPM with 30-50 IPM feed. For quartz composites, increase to 5500-7000 RPM at 45-65 IPM. The eased profile requires careful attention to entry and exit points on the toolpath to prevent edge chipping. Program multiple depth passes rather than a single full-depth cut. Coolant temperature should remain below 70°F for optimal diamond tool performance. Dress profiling wheels after every 20-30 linear feet of cutting to maintain profile accuracy.
Material Compatibility
The Eased/Straight Edge Profile (Quartzite) - 2cm template works exceptionally well with natural granite, providing clean edges that polish to a high gloss. Marble is also compatible, though the softer stone requires reduced feed rates during CNC operations to prevent micro-chipping. Quartzite offers excellent results with this profile, as the hard mineral structure holds fine details well. Engineered quartz composites are ideal substrates, offering consistent material properties that produce predictable results. Soapstone and slate can be profiled using this template with appropriate tooling adjustments. For limestone, use conservative CNC parameters due to the stone's tendency to chip on detailed profiles. Porcelain sintered stone panels require specialized diamond tooling but produce excellent results with the eased geometry.
Where to Buy
Professional fabricators can source marble slabs from local stone distributors and wholesale suppliers. Visit SlabWise for template downloads and fabrication resources.