Double Ogee Edge Profile - 3cm
Description
The Double Ogee edge profile represents the pinnacle of luxury countertop edge design, featuring two stacked S-curves that create an elegant, classical appearance. This sophisticated edge treatment is designed specifically for 3cm (1-3/16 inch) slabs and delivers a dramatic visual impact that elevates any kitchen or bathroom installation. The double ogee combines traditional craftsmanship aesthetics with modern CNC precision, making it a favorite choice for high-end residential projects, luxury hotels, and premium commercial spaces. This template includes a comprehensive 12-position tool sequence starting with roughing finger bits and progressing through metal bond and resin bond polishing pads from 50 grit to 8000 grit, finishing with a buff pad for mirror-like shine. The profile extends 1.5 inches from the slab face and showcases the full 1.181-inch thickness of the 3cm material. Fabricators appreciate the double ogee for its ability to command premium pricing while the detailed tool sequence ensures consistent, reproducible results across multiple installations.
Related Templates
Bird's Beak Edge Profile (Granite) - 2cm+2cm Laminated
Bird's Beak Edge Profile (Marble) - 2cm+2cm Laminated
Bird's Beak Edge Profile (Porcelain) - 2cm+2cm Laminated
Bird's Beak Edge Profile (Quartz (Engineered)) - 2cm+2cm Laminated
Answer summary
What is the Double Ogee Edge Profile - 3cm DXF template for?
Double Ogee Edge Profile - 3cm is a edge profiles DXF template for countertop fabrication. Use it only after matching the manufacturer, model, dimensions, variant, and shop workflow to the actual job.
Risk check: Similar-looking products can use different cutout geometry. Confirm the official spec, shop tolerance, material behavior, and CNC output before production.
Next step: Run a DXF check, compare related templates, and keep the current manufacturer spec with the job packet.
Template decision guide
Should you use the Double Ogee Edge Profile - 3cm DXF template?
Use the template page to shortlist a production file, then verify the exact model, variant, and machine workflow before cutting.
Best fit
Double Ogee Edge Profile - 3cm is most useful when the product, manufacturer, model, install type, and variant match the job you are fabricating.
What to compare
Compare model number, dimensions, reveal or overhang, bowl or appliance geometry, material thickness, and CNC output requirements.
Risk check
Do not use a similar-looking template as a final production file. Small changes in flange, radius, trim, or reveal can cause a failed cutout.
Evidence to verify
Check the current manufacturer spec, field measurement, template preview, DXF layers, and a shop-approved tolerance before production.
Page-specific notes
Page-specific notes for Double Ogee Edge Profile - 3cm
These notes are assembled from this exact template record, its category, available variants, and nearby template comparisons. They are meant to make the page more useful than a generic download page.
Exact record SlabWise is using
Double Ogee Edge Profile - 3cm is filed under Edge Profiles. The normalized record lists profile height 1.181", profile depth 1.5", so the safest use is as a production starting point that still gets checked against the current job packet.
Variant choice
This record is shown as a single template variant. Treat that as a reason to verify reveal, overhang, and cutout assumptions before the file reaches production.
Category-specific production check
Edge Profiles files should be checked for fit against material thickness, edge treatment, sink or appliance clearance, CNC layer expectations, and the shop's preferred tolerance before cutting customer material.
Closest comparisons
Before choosing this file, compare it with Bird's Beak Edge Profile (Granite) - 2cm+2cm Laminated, Bird's Beak Edge Profile (Marble) - 2cm+2cm Laminated, Bird's Beak Edge Profile (Porcelain) - 2cm+2cm Laminated to catch small model, radius, flange, or layout differences that can change the final cut.
Evidence already attached
This page has extra enrichment for installation overview, CNC cutting notes, material compatibility, buying context. Use those notes as decision support, then keep the official product spec with the job.
The Double Ogee edge profile represents the pinnacle of luxury countertop edge design, featuring two stacked S-curves that create an elegant, classical appearance. This sophisticated edge treatment is designed specifically for 3cm (1-3/16 inch) slabs and delivers a dramatic visual impact that elevates any kitchen or bathroom installation. The double ogee combines traditional craftsmanship aesthetics with modern CNC precision, making it a favorite choice for high-end residential projects, luxury hotels, and premium commercial spaces. This template includes a comprehensive 12-position tool sequence starting with roughing finger bits and progressing through metal bond and resin bond polishing pads from 50 grit to 8000 grit, finishing with a buff pad for mirror-like shine. The profile extends 1.5 inches from the slab face and showcases the full 1.181-inch thickness of the 3cm material. Fabricators appreciate the double ogee for its ability to command premium pricing while the detailed tool sequence ensures consistent, reproducible results across multiple installations.
Installation Overview
Installing a double ogee edge requires careful attention to slab positioning and support during the extended machining cycle. Begin by securing the slab with adequate support under the edge to prevent vibration during the multi-pass roughing operations. The template specifies two roughing passes with 20mm finger bits at different RPMs to establish the complex curved profile without overloading the tooling. Position the slab to allow full tool access along the entire edge length, ensuring consistent depth of cut. After roughing, the 11-position polishing sequence progressively refines the surface through metal bond pads (50-100 grit) followed by resin bond pads (200-8000 grit). Each polishing position requires specific RPM settings ranging from 2240 to 3520 RPM. The entire edge fabrication typically takes 45-60 minutes per linear foot depending on material hardness and desired finish quality.
CNC Cutting Notes
CNC programming for the double ogee edge demands precise tool path generation to achieve the signature stacked S-curve geometry. Start roughing operations at 2800 RPM with the 20mm finger bit, using conservative feed rates of 60-80 inches per minute to prevent tool deflection on the aggressive curved portions. The secondary roughing pass at 2380 RPM with fine depth increments (0.5mm max) smooths the profile and reduces polishing time. During polishing, maintain consistent tool pressure and overlap each pass by 30-40% to eliminate witness lines. Increase RPM progressively through the polishing sequence as specified, but monitor material temperature especially on engineered quartz to avoid resin burn. The profile depth of 1.5 inches requires careful Z-axis calibration and tool length verification before beginning fabrication. Use coolant or water during all cutting and initial polishing stages to extend tool life and improve surface quality.
Material Compatibility
The double ogee edge profile works beautifully on all premium natural stone and engineered materials including granite, marble, quartzite, quartz, and ultracompact surfaces. Harder materials like quartzite and Dekton may require RPM adjustments (increase by 5-10%) and more frequent tool dressing to maintain edge quality. Softer materials like marble benefit from starting polishing at 100 grit instead of 50 grit to avoid excessive material removal. The 3cm thickness is essential for this profile as thinner materials lack sufficient depth to showcase the full double-curve design. Premium white marbles and high-contrast granites particularly benefit from the light-catching properties of the double ogee's complex curves.
Where to Buy
This double ogee edge profile DXF template is available for free download from SlabWise. The template works with all major CNC stone fabrication equipment including Intermac, Prussiani, Park Industries, and GMM machines. Local stone fabrication shops and countertop installers can produce this edge profile using the template along with standard diamond tooling available from Alpha Tools, Weha, or Braxton-Bragg.