Double Ogee Edge Profile (Quartz (Engineered)) - 2cm
Description
Double ogee edge profile for 2cm (3/4") countertop slabs. Two stacked S-curves. Optimized polishing parameters for Quartz (Engineered). Slightly lower RPM to avoid resin burn on engineered quartz.
Related Templates
Bird's Beak Edge Profile (Granite) - 2cm+2cm Laminated
Bird's Beak Edge Profile (Marble) - 2cm+2cm Laminated
Bird's Beak Edge Profile (Porcelain) - 2cm+2cm Laminated
Bird's Beak Edge Profile (Quartz (Engineered)) - 2cm+2cm Laminated
Answer summary
What is the Double Ogee Edge Profile (Quartz (Engineered)) - 2cm DXF template for?
Double Ogee Edge Profile (Quartz (Engineered)) - 2cm is a edge profiles DXF template for countertop fabrication. Use it only after matching the manufacturer, model, dimensions, variant, and shop workflow to the actual job.
Risk check: Similar-looking products can use different cutout geometry. Confirm the official spec, shop tolerance, material behavior, and CNC output before production.
Next step: Run a DXF check, compare related templates, and keep the current manufacturer spec with the job packet.
Template decision guide
Should you use the Double Ogee Edge Profile (Quartz (Engineered)) - 2cm DXF template?
Use the template page to shortlist a production file, then verify the exact model, variant, and machine workflow before cutting.
Best fit
Double Ogee Edge Profile (Quartz (Engineered)) - 2cm is most useful when the product, manufacturer, model, install type, and variant match the job you are fabricating.
What to compare
Compare model number, dimensions, reveal or overhang, bowl or appliance geometry, material thickness, and CNC output requirements.
Risk check
Do not use a similar-looking template as a final production file. Small changes in flange, radius, trim, or reveal can cause a failed cutout.
Evidence to verify
Check the current manufacturer spec, field measurement, template preview, DXF layers, and a shop-approved tolerance before production.
Page-specific notes
Page-specific notes for Double Ogee Edge Profile (Quartz (Engineered)) - 2cm
These notes are assembled from this exact template record, its category, available variants, and nearby template comparisons. They are meant to make the page more useful than a generic download page.
Exact record SlabWise is using
Double Ogee Edge Profile (Quartz (Engineered)) - 2cm is filed under Edge Profiles. The normalized record lists profile height 0.787", profile depth 1.5", so the safest use is as a production starting point that still gets checked against the current job packet.
Variant choice
This record is shown as a single template variant. Treat that as a reason to verify reveal, overhang, and cutout assumptions before the file reaches production.
Category-specific production check
Edge Profiles files should be checked for fit against material thickness, edge treatment, sink or appliance clearance, CNC layer expectations, and the shop's preferred tolerance before cutting customer material.
Closest comparisons
Before choosing this file, compare it with Bird's Beak Edge Profile (Granite) - 2cm+2cm Laminated, Bird's Beak Edge Profile (Marble) - 2cm+2cm Laminated, Bird's Beak Edge Profile (Porcelain) - 2cm+2cm Laminated to catch small model, radius, flange, or layout differences that can change the final cut.
Evidence already attached
This page has extra enrichment for installation overview, CNC cutting notes, material compatibility, buying context. Use those notes as decision support, then keep the official product spec with the job.
Designed for professional stone fabrication, the Double Ogee Edge Profile (Quartz (Engineered)) - 2cm template captures the exact geometry needed for flawless double edge profiles. The standard dimensions specifications align with industry-standard tooling and CNC equipment. This profile is particularly suited for granite countertops where precision matters. From initial roughing passes to final polish, having an accurate DXF template eliminates guesswork and ensures every piece matches. The double edge has proven popular in bathroom applications, delivering both durability and visual appeal that clients consistently request.
Installation Overview
Fabricating the Double Ogee Edge Profile (Quartz (Engineered)) - 2cm edge starts with proper slab preparation and CNC setup. Secure the countertop blank on the CNC table using vacuum pods or mechanical clamps, ensuring the edge to be profiled extends beyond the table edge sufficiently. Load the DXF template into your CAM software and set the appropriate tool offsets for your specific edge profiling bits. For the initial roughing pass on granite, use a feed rate of 40-60 inches per minute with a spindle speed of 4500-6000 RPM. The double profile geometry requires attention to bit selection, using profiling wheels that match the radius specifications in the template. After roughing, perform a semi-finish pass at 80% depth before the final profile cut. Water flow should be maintained at 2-3 gallons per minute minimum to prevent heat buildup. Hand polishing follows CNC work, progressing through 50, 100, 200, 400, 800, 1500, and 3000 grit pads. Buff with a felt pad and polishing compound for a mirror finish. Seal with an impregnating sealer designed for natural stone.
CNC Cutting Notes
Optimal CNC settings for the Double Ogee Edge Profile (Quartz (Engineered)) - 2cm template depend on the substrate material. For natural granite, use 4000-5500 RPM with 30-50 IPM feed. For quartz composites, increase to 5500-7000 RPM at 45-65 IPM. The double profile requires careful attention to entry and exit points on the toolpath to prevent edge chipping. Program multiple depth passes rather than a single full-depth cut. Coolant temperature should remain below 70°F for optimal diamond tool performance. Dress profiling wheels after every 20-30 linear feet of cutting to maintain profile accuracy.
Material Compatibility
The Double Ogee Edge Profile (Quartz (Engineered)) - 2cm profile pairs best with medium-to-hard natural stones and engineered materials. Granite is the ideal substrate, offering the hardness needed to maintain the double geometry while accepting a brilliant polish. Quartz composites provide consistent results with minimal tool wear variation. For softer stones like marble or limestone, the profile remains achievable but requires adjusted CNC parameters and additional care during finishing. Exotic stones such as quartzite and super-white dolomite produce stunning results with this profile. Sintered stone panels are compatible when using specialized thin-material tooling. Always perform a test cut on representative material before beginning production runs.
Where to Buy
Professional fabricators can source granite slabs from local stone distributors and wholesale suppliers. Visit SlabWise for template downloads and fabrication resources.