Description
Cove ogee edge profile for 3cm+2cm laminated (2") countertop slabs. Cove at top with ogee below. Optimized polishing parameters for Ultracompact (Dekton/Neolith). Diamond tooling required. Higher RPM and starting at coarser grit for sintered surfaces.
Related Templates
Bird's Beak Edge Profile (Granite) - 2cm+2cm Laminated
Bird's Beak Edge Profile (Marble) - 2cm+2cm Laminated
Bird's Beak Edge Profile (Porcelain) - 2cm+2cm Laminated
Bird's Beak Edge Profile (Quartz (Engineered)) - 2cm+2cm Laminated
Designed for professional stone fabrication, the Cove Ogee Edge Profile (Ultracompact (Dekton/Neolith)) - 3cm+2cm Laminated template captures the exact geometry needed for flawless cove edge profiles. The standard dimensions specifications align with industry-standard tooling and CNC equipment. This profile is particularly suited for engineered quartz countertops where precision matters. From initial roughing passes to final polish, having an accurate DXF template eliminates guesswork and ensures every piece matches. The cove edge has proven popular in hospitality applications, delivering both durability and visual appeal that clients consistently request.
Installation Overview
The Cove Ogee Edge Profile (Ultracompact (Dekton/Neolith)) - 3cm+2cm Laminated edge fabrication process begins with verifying slab thickness matches the template specifications. Load the DXF profile into your CNC control software, setting the origin point at the slab edge. For engineered quartz, select diamond tooling rated for the stone hardness. The roughing sequence should remove material in 3-4 progressive passes to avoid excessive tool wear. Use climb milling direction for cleaner edges on the cove profile. Maintain consistent coolant flow throughout all cutting operations. After CNC profiling, inspect the edge against the template geometry using a profile gauge. Hand finishing starts with 50-grit diamond pads, working through the standard progression to 3000 grit. The cove profile may require specialty polishing pads for concave sections. Apply masking tape along the countertop surface adjacent to the edge during polishing to prevent surface scratches. Finish with an appropriate stone sealer that penetrates without altering the stone's appearance.
CNC Cutting Notes
Optimal CNC settings for the Cove Ogee Edge Profile (Ultracompact (Dekton/Neolith)) - 3cm+2cm Laminated template depend on the substrate material. For natural granite, use 4000-5500 RPM with 30-50 IPM feed. For quartz composites, increase to 5500-7000 RPM at 45-65 IPM. The cove profile requires careful attention to entry and exit points on the toolpath to prevent edge chipping. Program multiple depth passes rather than a single full-depth cut. Coolant temperature should remain below 70°F for optimal diamond tool performance. Dress profiling wheels after every 20-30 linear feet of cutting to maintain profile accuracy.
Material Compatibility
The Cove Ogee Edge Profile (Ultracompact (Dekton/Neolith)) - 3cm+2cm Laminated profile pairs best with medium-to-hard natural stones and engineered materials. Granite is the ideal substrate, offering the hardness needed to maintain the cove geometry while accepting a brilliant polish. Quartz composites provide consistent results with minimal tool wear variation. For softer stones like marble or limestone, the profile remains achievable but requires adjusted CNC parameters and additional care during finishing. Exotic stones such as quartzite and super-white dolomite produce stunning results with this profile. Sintered stone panels are compatible when using specialized thin-material tooling. Always perform a test cut on representative material before beginning production runs.
Where to Buy
Professional fabricators can source engineered quartz slabs from local stone distributors and wholesale suppliers. Visit SlabWise for template downloads and fabrication resources.