Description
The Bar Home Bar with Sink - 6ft (42" height) template provides a complete countertop layout optimized for home-sink configurations. With overall dimensions of 72" width, 42" height, 18.0" front_depth, this DXF file gives fabricators the precise geometry needed for templating and CNC programming. Designed for bar counter height applications, this layout accounts for standard cabinet dimensions and overhang requirements. Professional shops use templates like this to streamline the estimation and fabrication process, reducing errors and material waste across production runs.
Dimensions
- Overall Width
- 72"
Specifications
- Downloads
- 0
Related Templates
Bar Chicago Bar Raised Back - 10ft (42" height)
Bar Chicago Bar Raised Back - 10ft (36" height)
Bar Chicago Bar Raised Back - 12ft (42" height)
Bar Chicago Bar Raised Back - 12ft (36" height)
The Bar Home Bar with Sink - 6ft (42" height) template provides a complete countertop layout optimized for home-sink configurations. With overall dimensions of 72" width, 42" height, 18.0" front_depth, this DXF file gives fabricators the precise geometry needed for templating and CNC programming. Designed for bar counter height applications, this layout accounts for standard cabinet dimensions and overhang requirements. Professional shops use templates like this to streamline the estimation and fabrication process, reducing errors and material waste across production runs.
Installation Overview
Installing the Bar Home Bar with Sink - 6ft (42" height) countertop layout begins with thorough field measurement verification. Compare the DXF template dimensions against the actual cabinet configuration, noting any deviations. For bar counter height installations, ensure all base cabinets are level within 1/8" across the full span. Transfer the template geometry to the stone slab using CNC programming software, optimizing material placement for minimal waste. Cut primary pieces first, followed by any seam sections. For home-sink configurations, plan seam locations at areas of minimum stress and maximum visual concealment. During installation, apply adhesive to the cabinet tops using a continuous bead pattern. Position the first section and check for level before proceeding. Joint seams using color-matched epoxy, clamping pieces together with seam setters. Allow full cure time before removing clamps. Apply supports beneath any overhanging sections exceeding 6 inches. Finish by sealing all surfaces and edges with an appropriate stone sealer.
CNC Cutting Notes
CNC programming for the Bar Home Bar with Sink - 6ft (42" height) should account for tool wear compensation, especially on abrasive dolomite stones. Recommended parameters: spindle speed 4500-6500 RPM, feed rate 35-55 IPM for roughing. The home-sink geometry benefits from a two-pass strategy — rough to within 2mm of final profile, then finish at reduced feed rate (15-25 IPM). Use plunge rates no faster than 10 IPM to prevent tool breakage. Monitor vibration levels during cutting; excessive chatter indicates tool wear or incorrect speed/feed settings. Keep backup tooling on hand for production runs exceeding 50 linear feet of edge profile.
Material Compatibility
The Bar Home Bar with Sink - 6ft (42" height) profile pairs best with medium-to-hard natural stones and engineered materials. Granite is the ideal substrate, offering the hardness needed to maintain the home-sink geometry while accepting a brilliant polish. Quartz composites provide consistent results with minimal tool wear variation. For softer stones like marble or limestone, the profile remains achievable but requires adjusted CNC parameters and additional care during finishing. Exotic stones such as quartzite and super-white dolomite produce stunning results with this profile. Sintered stone panels are compatible when using specialized thin-material tooling. Always perform a test cut on representative material before beginning production runs.
Where to Buy
Professional fabricators can source dolomite slabs from local stone distributors and wholesale suppliers. Visit SlabWise for template downloads and fabrication resources.