Description
The Bar Commercial Bar Top - 6ft (42" height) delivers a production-ready layout for commercial-top countertop fabrication. Spanning 72" width, 42" height, 18.0" front_depth, this template is designed specifically for bar counter height configurations common in residential and commercial projects. Professional fabricators appreciate the precision-engineered geometry that accounts for seam placement, overhang specifications, and cabinet alignment. This DXF file imports directly into CNC programming software, providing the foundation for accurate cutting and minimal material waste.
Dimensions
- Overall Width
- 72"
Specifications
- Downloads
- 0
Related Templates
Bar Chicago Bar Raised Back - 10ft (42" height)
Bar Chicago Bar Raised Back - 10ft (36" height)
Bar Chicago Bar Raised Back - 12ft (42" height)
Bar Chicago Bar Raised Back - 12ft (36" height)
The Bar Commercial Bar Top - 6ft (42" height) delivers a production-ready layout for commercial-top countertop fabrication. Spanning 72" width, 42" height, 18.0" front_depth, this template is designed specifically for bar counter height configurations common in residential and commercial projects. Professional fabricators appreciate the precision-engineered geometry that accounts for seam placement, overhang specifications, and cabinet alignment. This DXF file imports directly into CNC programming software, providing the foundation for accurate cutting and minimal material waste.
Installation Overview
Fabricating and installing the Bar Commercial Bar Top - 6ft (42" height) layout follows a structured process designed for commercial-top configurations. Begin by importing the DXF template into your CAM software and creating an optimized cutting plan for 72" width, 42" height, 18.0" front_depth geometry. For bar counter height installations, account for any field modifications noted during site verification. Program CNC cuts with appropriate tool compensation for blade kerf width. Cut all pieces, then perform edge finishing as specified. Dry-assemble the complete layout in the shop when possible to verify fit before delivery. During installation, start with the longest run of the commercial-top layout, setting it level on the prepared cabinets. Use construction adhesive rated for stone on all cabinet contact surfaces. Proceed with adjoining sections, seaming with color-matched epoxy. For corners in the commercial-top configuration, use specialized seam placement to minimize visual impact. Support all overhangs with brackets rated for the stone weight. Seal all surfaces upon completion.
CNC Cutting Notes
CNC programming for the Bar Commercial Bar Top - 6ft (42" height) should account for tool wear compensation, especially on abrasive granite stones. Recommended parameters: spindle speed 4500-6500 RPM, feed rate 35-55 IPM for roughing. The commercial-top geometry benefits from a two-pass strategy — rough to within 2mm of final profile, then finish at reduced feed rate (15-25 IPM). Use plunge rates no faster than 10 IPM to prevent tool breakage. Monitor vibration levels during cutting; excessive chatter indicates tool wear or incorrect speed/feed settings. Keep backup tooling on hand for production runs exceeding 50 linear feet of edge profile.
Material Compatibility
The Bar Commercial Bar Top - 6ft (42" height) profile pairs best with medium-to-hard natural stones and engineered materials. Granite is the ideal substrate, offering the hardness needed to maintain the commercial-top geometry while accepting a brilliant polish. Quartz composites provide consistent results with minimal tool wear variation. For softer stones like marble or limestone, the profile remains achievable but requires adjusted CNC parameters and additional care during finishing. Exotic stones such as quartzite and super-white dolomite produce stunning results with this profile. Sintered stone panels are compatible when using specialized thin-material tooling. Always perform a test cut on representative material before beginning production runs.
Where to Buy
Professional fabricators can source granite slabs from local stone distributors and wholesale suppliers. Visit SlabWise for template downloads and fabrication resources.