Viking 30 Electric Radiant Cooktop
Viking 30 Electric Radiant Cooktop
Description
IMPORTANT: This template represents a model that could not be verified through manufacturer sources. Viking Range produces the RVEC3305BSB (30-inch, 5-element electric cooktop) and RVEC3365BSB (36-inch, 5-element electric cooktop), but no RVEC3306BSS model appears in current or historical product catalogs. The model number suffix pattern and burner count do not match Viking's standard naming conventions. Dimensions provided are approximated and may not correspond to any real product. Before using this template for fabrication, verify dimensions independently through official Viking documentation or contact Viking Range customer service directly.
Dimensions
- Overall Width
- 31"
- Overall Depth
- 21.125"
- Corner Radius
- 0.375"
Specifications
- Manufacturer
- Viking
- Model Number
- RVEC3306BSS
- Downloads
- 0
Related Templates
Answer summary
What is the Viking 30 Electric Radiant Cooktop DXF template for?
Viking 30 Electric Radiant Cooktop is a cooktop & range cutouts DXF template for countertop fabrication. Use it only after matching the manufacturer, model, dimensions, variant, and shop workflow to the actual job.
Risk check: Similar-looking products can use different cutout geometry. Confirm the official spec, shop tolerance, material behavior, and CNC output before production.
Next step: Run a DXF check, compare related templates, and keep the current manufacturer spec with the job packet.
Template decision guide
Should you use the Viking 30 Electric Radiant Cooktop DXF template?
Use the template page to shortlist a production file, then verify the exact model, variant, and machine workflow before cutting.
Best fit
Viking 30 Electric Radiant Cooktop is most useful when the product, manufacturer, model, install type, and variant match the job you are fabricating.
What to compare
Compare model number, dimensions, reveal or overhang, bowl or appliance geometry, material thickness, and CNC output requirements.
Risk check
Do not use a similar-looking template as a final production file. Small changes in flange, radius, trim, or reveal can cause a failed cutout.
Evidence to verify
Check the current manufacturer spec, field measurement, template preview, DXF layers, and a shop-approved tolerance before production.
Page-specific notes
Page-specific notes for Viking 30 Electric Radiant Cooktop
These notes are assembled from this exact template record, its category, available variants, and nearby template comparisons. They are meant to make the page more useful than a generic download page.
Exact record SlabWise is using
Viking RVEC3306BSS is filed under Cooktop & Range Cutouts. The normalized record lists width 31", depth 21.125", corner radius 0.375", so the safest use is as a production starting point that still gets checked against the current job packet.
Variant choice
This record is shown as a single template variant. Treat that as a reason to verify reveal, overhang, and cutout assumptions before the file reaches production.
Category-specific production check
Cooktop & Range Cutouts files should be checked for fit against material thickness, edge treatment, sink or appliance clearance, CNC layer expectations, and the shop's preferred tolerance before cutting customer material.
Closest comparisons
Before choosing this file, compare it with Viking 36 Electric Radiant Cooktop, Viking 36 Electric 5 Series Cooktop, Viking 36 Downdraft Vent to catch small model, radius, flange, or layout differences that can change the final cut.
Evidence already attached
This page has extra enrichment for installation overview, CNC cutting notes, material compatibility, buying context. Use those notes as decision support, then keep the official product spec with the job.
IMPORTANT: This template represents a model that could not be verified through manufacturer sources. Viking Range produces the RVEC3305BSB (30-inch, 5-element electric cooktop) and RVEC3365BSB (36-inch, 5-element electric cooktop), but no RVEC3306BSS model appears in current or historical product catalogs. The model number suffix pattern and burner count do not match Viking's standard naming conventions. Dimensions provided are approximated and may not correspond to any real product. Before using this template for fabrication, verify dimensions independently through official Viking documentation or contact Viking Range customer service directly.
Installation Overview
Because this model cannot be verified, standard installation procedures cannot be confirmed. If you have a Viking 30-inch electric cooktop requiring a template, the correct model is likely RVEC3305BSB. Viking electric cooktops typically require a 240V electrical connection, adequate ventilation, and specific clearances from combustible materials as specified in official installation guides.
CNC Cutting Notes
DO NOT CUT without verification. If this template is used despite warnings, follow general CNC practices for electric cooktop cutouts: ensure corner radii match appliance specifications (typically 0.375" for Viking models), maintain tight tolerances (卤1/16" maximum), and verify cutout depth to accommodate electrical junction boxes and cooktop depth.
Material Compatibility
Template format is compatible with standard CNC systems for granite, quartz, marble, and solid surface materials. However, material compatibility is irrelevant if dimensions are incorrect.
Where to Buy
This model number does not appear in authorized Viking dealer inventories. For 30-inch Viking electric cooktops, the verified model is RVEC3305BSB. Visit vikingrange.com or contact authorized Viking dealers for accurate product information.