Hestan 30 Rangetop
Description
The Hestan KRT30 rangetop represents professional-grade cooking performance in a 30-inch format, featuring four powerful sealed burners and commercial-style construction. For countertop fabricators, achieving a precise cutout is critical when installing this premium appliance. Our CNC-ready DXF template ensures exact dimensional accuracy for the 30-inch wide by 24.5-inch deep cutout, accounting for the unit's 7-3/8 inch height and proper platform requirements.
Dimensions
- Overall Width
- 30"
- Overall Depth
- 27.875"
- Corner Radius
- 0.5"
Specifications
- Manufacturer
- Hestan
- Model Number
- KRT30
- Downloads
- 0
Related Templates
The Hestan KRT30 rangetop represents professional-grade cooking performance in a 30-inch format, featuring four powerful sealed burners and commercial-style construction. For countertop fabricators, achieving a precise cutout is critical when installing this premium appliance. Our CNC-ready DXF template ensures exact dimensional accuracy for the 30-inch wide by 24.5-inch deep cutout, accounting for the unit's 7-3/8 inch height and proper platform requirements.
Installation Overview
Installing a Hestan KRT30 rangetop requires careful attention to cutout specifications and support structure. The appliance demands a 30-inch wide by 24.5-inch deep opening with a raised platform to achieve proper alignment with the countertop surface. The unit's overall depth of 27-7/8 inches extends beyond the cutout, creating the characteristic professional bullnose edge. Fabricators must ensure the substrate can support the 200+ pound weight while maintaining precise tolerances around the perimeter. The 1/2-inch corner radius specified in our template prevents stress concentration in natural stone and engineered materials. Proper ventilation clearances below the rangetop and gas line accessibility must be verified before cutting. The platform height calculation is critical, as the rangetop sits 7-3/8 inches tall and must align flush with the countertop surface for both aesthetic and safety reasons.
CNC Cutting Notes
When programming CNC toolpaths for the Hestan KRT30 cutout, start with interior pocketing operations before perimeter cutting to minimize vibration. Use a 1/4-inch or 3/8-inch carbide end mill for granite and quartzite, maintaining feed rates between 80-120 inches per minute depending on material hardness. The 1/2-inch corner radii should be cut with appropriate corner-rounding or circular interpolation to prevent sharp internal corners that create stress points. For quartz materials, employ wet cutting to manage heat and dust. Tab placement should be strategic—position at least four tabs on the perimeter to support the cutout piece during final separation.
Material Compatibility
The Hestan KRT30 cutout template is compatible with all standard countertop materials including granite, quartzite, marble, quartz, and ultra-compact surfaces. Natural stone installations benefit from the generous 1/2-inch corner radius, which reduces the likelihood of cracking during cutting and thermal cycling. Quartz fabricators should verify material thickness (typically 3cm) can accommodate the platform support structure while maintaining adequate edge distance. The 107,000 BTU total output generates significant heat, making heat-resistant materials like granite and quartzite excellent choices. For materials with directional veining like marble or certain granites, orient the template to optimize visual flow.
Where to Buy
Hestan KRT30 rangetops are available through authorized dealers including specialty appliance retailers and kitchen design showrooms. Model numbers vary by fuel type (KRT304NG for natural gas, KRT304LP for propane) and finish options. Pricing typically ranges from $4,500-6,000 depending on configuration and finish.