Miele 30 Gas Cooktop
Miele 30 Gas Cooktop
Description
The Miele KM3474G represents the pinnacle of gas cooking technology in a 30-inch format, and proper installation begins with precise countertop fabrication. This professional-grade DXF template provides fabricators with exact cutout dimensions (33.6875" x 18.875") verified directly from Miele's official specifications. Whether you're working with granite, quartz, marble, or engineered stone, this template ensures your CNC router or manual cutting process delivers a perfect fit for this premium 5-burner gas cooktop. The KM3474G features Miele's signature Hexa grates and dual wok burners, delivering over 60,000 BTU of cooking power with precision German engineering.
Dimensions
- Overall Width
- 35.125"
- Overall Depth
- 20.1875"
- Corner Radius
- 0.375"
Specifications
- Manufacturer
- Miele
- Model Number
- KM3474G
- Downloads
- 0
Related Templates
Answer summary
What is the Miele 30 Gas Cooktop DXF template for?
Miele 30 Gas Cooktop is a cooktop & range cutouts DXF template for countertop fabrication. Use it only after matching the manufacturer, model, dimensions, variant, and shop workflow to the actual job.
Risk check: Similar-looking products can use different cutout geometry. Confirm the official spec, shop tolerance, material behavior, and CNC output before production.
Next step: Run a DXF check, compare related templates, and keep the current manufacturer spec with the job packet.
Template decision guide
Should you use the Miele 30 Gas Cooktop DXF template?
Use the template page to shortlist a production file, then verify the exact model, variant, and machine workflow before cutting.
Best fit
Miele 30 Gas Cooktop is most useful when the product, manufacturer, model, install type, and variant match the job you are fabricating.
What to compare
Compare model number, dimensions, reveal or overhang, bowl or appliance geometry, material thickness, and CNC output requirements.
Risk check
Do not use a similar-looking template as a final production file. Small changes in flange, radius, trim, or reveal can cause a failed cutout.
Evidence to verify
Check the current manufacturer spec, field measurement, template preview, DXF layers, and a shop-approved tolerance before production.
Page-specific notes
Page-specific notes for Miele 30 Gas Cooktop
These notes are assembled from this exact template record, its category, available variants, and nearby template comparisons. They are meant to make the page more useful than a generic download page.
Exact record SlabWise is using
Miele KM3474G is filed under Cooktop & Range Cutouts. The normalized record lists width 35.125", depth 20.1875", corner radius 0.375", so the safest use is as a production starting point that still gets checked against the current job packet.
Variant choice
This record is shown as a single template variant. Treat that as a reason to verify reveal, overhang, and cutout assumptions before the file reaches production.
Category-specific production check
Cooktop & Range Cutouts files should be checked for fit against material thickness, edge treatment, sink or appliance clearance, CNC layer expectations, and the shop's preferred tolerance before cutting customer material.
Closest comparisons
Before choosing this file, compare it with Miele 36 Gas Cooktop, Miele 24 Domino Induction Cooktop, Miele 30 Electric Cooktop to catch small model, radius, flange, or layout differences that can change the final cut.
Evidence already attached
This page has extra enrichment for installation overview, CNC cutting notes, material compatibility, buying context. Use those notes as decision support, then keep the official product spec with the job.
The Miele KM3474G represents the pinnacle of gas cooking technology in a 30-inch format, and proper installation begins with precise countertop fabrication. This professional-grade DXF template provides fabricators with exact cutout dimensions (33.6875" x 18.875") verified directly from Miele's official specifications. Whether you're working with granite, quartz, marble, or engineered stone, this template ensures your CNC router or manual cutting process delivers a perfect fit for this premium 5-burner gas cooktop. The KM3474G features Miele's signature Hexa grates and dual wok burners, delivering over 60,000 BTU of cooking power with precision German engineering.
Installation Overview
Installing the Miele KM3474G requires careful attention to both cutout precision and clearance requirements. The overall unit dimensions measure 35.125" wide by 20.1875" deep, with the cutout requiring 33.6875" x 18.875" with a standard 0.375" corner radius. Fabricators should note that this gas cooktop requires minimum 3" clearance from combustible materials and adequate ventilation beneath the countertop. The unit sits flush with the counter surface at 3.375" height, making it compatible with standard 1.25" thick stone slabs when proper support is provided. Gas line connection (1/2" NPT) and 120V electrical for ignition must be positioned appropriately before template cutting begins. Always verify final measurements with the actual appliance when possible, as manufacturing tolerances can vary slightly.
CNC Cutting Notes
When programming your CNC for the KM3474G cutout, start with a conservative approach using a 1/4" or 3/8" diameter router bit suitable for stone. The 0.375" corner radius is critical for proper seating and stress distribution in the material. Set your feed rate between 30-50 IPM depending on material hardness, with a plunge rate of 10-15 IPM to prevent chipping at entry points. For granite and harder materials, use multiple depth passes of 0.125" to 0.25" rather than attempting a full-depth cut. The template includes precise reference points for bit offset calculations. Always cut the interior dimension first, then make relief cuts at corners before routing the radius. For manual fabrication, use the DXF to create a paper template, then transfer to the stone surface with a marker, cutting with a 4-5" grinder equipped with a diamond blade. Test fit with the appliance frame before final installation.
Material Compatibility
This cutout template is optimized for all natural and engineered stone materials commonly used in countertop fabrication. For granite slabs (both 2cm and 3cm thickness), the cutout provides excellent structural integrity with the 0.375" corner radius preventing crack propagation. Quartz and engineered stone installations benefit from the precise dimensional accuracy, as these materials are less forgiving of field adjustments. Marble fabrications require extra care during cutting due to the material's tendency to chip, making the CNC template particularly valuable. The template also works for solid surface materials like Corian, though these typically require different cutting tools and techniques. Laminate countertops can accommodate this cooktop but require additional substrate support around the cutout perimeter. For ultra-compact surfaces like Dekton or Neolith, follow manufacturer-specific cutting guidelines while using this template for dimensional reference. The 18.875" depth makes this compatible with standard 25" deep countertops with adequate rear clearance.
Where to Buy
The Miele KM3474G gas cooktop is available through authorized Miele dealers and premium appliance retailers nationwide. Major online retailers including Designer Appliances, AJ Madison, Ferguson, and Appliances Connection stock this model with competitive pricing typically ranging from $2,800 to $3,500. For local purchase and professional installation support, Miele's dealer locator tool on their website can connect you with authorized showrooms in your area. Many high-end kitchen and bath retailers carry the full Miele cooktop line and can provide hands-on demonstrations. When purchasing, verify that you're receiving the correct fuel type variant (natural gas model shown, LP conversion kit available separately). Professional fabricators often maintain relationships with appliance dealers for project-specific sourcing and delivery coordination. The unit typically ships with installation hardware, though some retailers offer extended warranties and professional installation services as add-ons.