LG 30 Induction Cooktop
LG 30 Induction Cooktop
Description
WARNING: This template is for model CBIJ3023S, which does not appear in current LG product catalogs. The CBIJ prefix is not used in LG cooktop model numbers. LG 30-inch induction cooktops typically use model numbers like CBIH3013BE. If you are looking for an LG 30-inch induction cooktop template, please verify the correct model number before proceeding with fabrication. Using incorrect dimensions could result in improper fit and costly mistakes.
Dimensions
- Overall Width
- 30"
- Overall Depth
- 21"
- Corner Radius
- 0.5"
Specifications
- Manufacturer
- LG
- Model Number
- CBIJ3023S
- Downloads
- 0
Related Templates
Answer summary
What is the LG 30 Induction Cooktop DXF template for?
LG 30 Induction Cooktop is a cooktop & range cutouts DXF template for countertop fabrication. Use it only after matching the manufacturer, model, dimensions, variant, and shop workflow to the actual job.
Risk check: Similar-looking products can use different cutout geometry. Confirm the official spec, shop tolerance, material behavior, and CNC output before production.
Next step: Run a DXF check, compare related templates, and keep the current manufacturer spec with the job packet.
Template decision guide
Should you use the LG 30 Induction Cooktop DXF template?
Use the template page to shortlist a production file, then verify the exact model, variant, and machine workflow before cutting.
Best fit
LG 30 Induction Cooktop is most useful when the product, manufacturer, model, install type, and variant match the job you are fabricating.
What to compare
Compare model number, dimensions, reveal or overhang, bowl or appliance geometry, material thickness, and CNC output requirements.
Risk check
Do not use a similar-looking template as a final production file. Small changes in flange, radius, trim, or reveal can cause a failed cutout.
Evidence to verify
Check the current manufacturer spec, field measurement, template preview, DXF layers, and a shop-approved tolerance before production.
Page-specific notes
Page-specific notes for LG 30 Induction Cooktop
These notes are assembled from this exact template record, its category, available variants, and nearby template comparisons. They are meant to make the page more useful than a generic download page.
Exact record SlabWise is using
LG CBIJ3023S is filed under Cooktop & Range Cutouts. The normalized record lists width 30", depth 21", corner radius 0.5", so the safest use is as a production starting point that still gets checked against the current job packet.
Variant choice
This record is shown as a single template variant. Treat that as a reason to verify reveal, overhang, and cutout assumptions before the file reaches production.
Category-specific production check
Cooktop & Range Cutouts files should be checked for fit against material thickness, edge treatment, sink or appliance clearance, CNC layer expectations, and the shop's preferred tolerance before cutting customer material.
Closest comparisons
Before choosing this file, compare it with LG 36 Induction Cooktop, LG 30 Electric Cooktop, LG 36 Electric Cooktop to catch small model, radius, flange, or layout differences that can change the final cut.
Evidence already attached
This page has extra enrichment for installation overview, CNC cutting notes, material compatibility, buying context. Use those notes as decision support, then keep the official product spec with the job.
WARNING: This template is for model CBIJ3023S, which does not appear in current LG product catalogs. The CBIJ prefix is not used in LG cooktop model numbers. LG 30-inch induction cooktops typically use model numbers like CBIH3013BE. If you are looking for an LG 30-inch induction cooktop template, please verify the correct model number before proceeding with fabrication. Using incorrect dimensions could result in improper fit and costly mistakes.
Installation Overview
This template cannot be recommended for installation as the model number CBIJ3023S does not correspond to a verified LG product. If you need cutout specifications for an LG 30-inch induction cooktop, the actual model is likely CBIH3013BE, which has different specifications. The CBIH3013BE requires a cutout of approximately 28 3/8 inches by 19 3/4 inches, but exact measurements should be verified from the appliance installation manual. Never cut countertops based on unverified template data - always confirm model numbers and dimensions with the actual appliance documentation.
CNC Cutting Notes
DO NOT USE THIS TEMPLATE FOR CNC PROGRAMMING without first verifying the actual model number and obtaining manufacturer specifications. Cutting a countertop based on phantom or incorrect model data will result in improper fit, potential damage to expensive materials, and project delays. If a customer specifies model CBIJ3023S, ask them to verify the model number on the actual appliance or purchase documentation. The correct LG 30-inch induction model is likely CBIH3013BE or similar CBIH-prefix model. Always measure the actual appliance when possible and cross-reference with manufacturer installation guides before programming cut files.
Material Compatibility
Template compatibility is irrelevant when the model number itself is unverified. No fabricator should proceed with cutting granite, quartz, or any countertop material based on this template without confirming the actual appliance model. The risk of costly material waste and project failure is too high. Request actual appliance documentation or physical measurements before proceeding.
Where to Buy
Model CBIJ3023S cannot be found at major appliance retailers, which confirms this is likely not a valid LG model number. If you are shopping for an LG 30-inch induction cooktop, look for models with the CBIH prefix such as CBIH3013BE, available at Best Buy, Home Depot, and other LG authorized dealers. Verify the exact model number before ordering both the appliance and template fabrication.